![Megalodon on Wheels](/img/default-banner.jpg)
- Видео 185
- Просмотров 809 243
Megalodon on Wheels
Южно-Африканская Республика
Добавлен 6 авг 2020
Did Somone say Cars?
How do you know if your car has False Knock and how to Fix it
How to see if you have false knock.
What causes false knock.
How do you fix false knock.
This video should help you out if you want to know more about knock.
Tools and Products I used:
MPVI3 from HP tuners
Laptop
Social Media Links:
Twitter:
► SabertoothPerf
Facebook:
► Sabertooth-Performance-156179111617209
Disclaimer:
Due to factors beyond the control of Sabertooth Performance, I cannot guarantee against improper use or unauthorized modifications of this information. Sabertooth Performance assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Sabertooth Performance rec...
What causes false knock.
How do you fix false knock.
This video should help you out if you want to know more about knock.
Tools and Products I used:
MPVI3 from HP tuners
Laptop
Social Media Links:
Twitter:
► SabertoothPerf
Facebook:
► Sabertooth-Performance-156179111617209
Disclaimer:
Due to factors beyond the control of Sabertooth Performance, I cannot guarantee against improper use or unauthorized modifications of this information. Sabertooth Performance assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Sabertooth Performance rec...
Просмотров: 150
Видео
Megalodon vs NFS A5 Drag race and Roll race
Просмотров 1424 месяца назад
The Video was taken from NFS A5
Testing a Water Methanol Kit to see if it really Does make more POWER
Просмотров 3565 месяцев назад
It says that a Water Methanol kit Gives better: *Intake air temps *Knock Resistant *More Power *and More... Is it True? Lets do a completer before and after comparrison. Tools and Products I used: MPVI3 from HP tuners Laptop Social Media Links: Twitter: ► SabertoothPerf Facebook: ► Sabertooth-Performance-156179111617209 Disclaimer: Due to factors beyond the control of S...
How to Install a Water Methanol System in your car
Просмотров 1605 месяцев назад
I will be installing a water methanol system in my car and I will show you step by step on how to do it. Tools and Products I used: Coolboost Stage 1 Methanol Kit Social Media Links: Twitter: ► SabertoothPerf Facebook: ► Sabertooth-Performance-156179111617209 Disclaimer: Due to factors beyond the control of Sabertooth Performance, I cannot guarantee against improper use...
How to Change the Internal Filter and Oil on a DSG Gearbox (DL501)
Просмотров 6905 месяцев назад
I changed the internal filter and the oil. This video will show you how you can do it at home but it is a lot of work haha. Tools and Products I used: New Oil and Filter Social Media Links: Twitter: ► SabertoothPerf Facebook: ► Sabertooth-Performance-156179111617209 Disclaimer: Due to factors beyond the control of Sabertooth Performance, I cannot guarantee against impro...
How to Change the External Filter on a DSG Gearbox (DL501)
Просмотров 2726 месяцев назад
The External Housing failed on me and Spilled my Gearbox oil all over the race track. So now I will show you how to install the new revised External Housing. Tools and Products I used: T30 10MM (If I am not Mistaken) New Oil and Filter Housing Social Media Links: Twitter: ► SabertoothPerf Facebook: ► Sabertooth-Performance-156179111617209 Disclaimer: Due to factors beyo...
Full Guide on How the Graph in VCM Scanner works for HP Tuners Part 4
Просмотров 2556 месяцев назад
I will be learning you about the graph and basic ways on how to make your own graphs according to what you want and give you a much better understanding of the process. Tools and Products I used: HP Tuners Tool (MPVI) Laptop Social Media Links: Twitter: ► SabertoothPerf Facebook: ► Sabertooth-Performance-156179111617209 Disclaimer: Due to factors beyond the control of S...
Did you know HP Tuners can also be a DYNO?
Просмотров 1056 месяцев назад
I will show you how to add Engine NM and HP to your HP tuners VCM Scanner so that you can see how much power your car makes after anything you have done. Tools and Products I used: HP Tuners Tool (MPVI) Laptop Social Media Links: Twitter: ► SabertoothPerf Facebook: ► Sabertooth-Performance-156179111617209 Disclaimer: Due to factors beyond the control of Sabertooth Perfo...
Full Guide on How the Gauges in VCM Scanner works for HP Tuners Part 3
Просмотров 3486 месяцев назад
I will be learning you about the gauges and basic ways on how to make your own gauges according to what you want and give you a much better understanding of the process. Tools and Products I used: HP Tuners Tool (MPVI) Laptop Social Media Links: Twitter: ► SabertoothPerf Facebook: ► Sabertooth-Performance-156179111617209 Disclaimer: Due to factors beyond the control of ...
Full Guide on How the Chart vs Time in VCM Scanner works for HP Tuners Part 2
Просмотров 1897 месяцев назад
I will be learning you about the time vs charts and basic ways on how to make your own gauges according to what you want and give you a much better understanding of the process. Tools and Products I used: HP Tuners Tool (MPVI) Laptop Social Media Links: Twitter: ► SabertoothPerf Facebook: ► Sabertooth-Performance-156179111617209 Disclaimer: Due to factors beyond the con...
Full Guide on How the Channel in VCM Scanner works for HP Tuners Part 1
Просмотров 2537 месяцев назад
I will be learning you about the Channels and basic ways on how to make your own Channel lists according to what you want and give you a much better understanding of the process. Tools and Products I used: HP Tuners Tool (MPVI) Laptop Social Media Links: Twitter: ► SabertoothPerf Facebook: ► Sabertooth-Performance-156179111617209 Disclaimer: Due to factors beyond the co...
How to Buy Credits and the License for your car with HP Tuners
Просмотров 1,1 тыс.7 месяцев назад
Are you struggling to Buy credits for your car or even unsure how to? Same goes to the license of your car! I will show you how to buy both of them in this video! Tools and Products I used: HP Tuners Tool (MPVI) Laptop Social Media Links: Twitter: ► SabertoothPerf Facebook: ► Sabertooth-Performance-156179111617209 Disclaimer: Due to factors beyond the control of Saberto...
How to Download VCM Scanner and Editor
Просмотров 5127 месяцев назад
I will show you how to download VCM Editor and VCM Scanner on your laptop or pc. www.hptuners.com Social Media Links: Twitter: ► SabertoothPerf Facebook: ► Sabertooth-Performance-156179111617209 Disclaimer: Due to factors beyond the control of Sabertooth Performance, I cannot guarantee against improper use or unauthorized modifications of this information. Sabertooth Pe...
I Bought my self the best GIFT for Any BIG CAR ENTHUSIAST!!
Просмотров 1307 месяцев назад
There is a lot of things out there for cars, But the Gift I got Myself was probably one of the best investments I made! I never tought I would have bought it when I did! I am so greatful! Social Media Links: Twitter: ► SabertoothPerf Facebook: ► Sabertooth-Performance-156179111617209 Disclaimer: Due to factors beyond the control of Sabertooth Performance, I cannot guara...
I went to the Drag Track and got my new PB Time
Просмотров 1508 месяцев назад
I went to the Drag Track and got my new PB Time
When you loose you know just how much to improve... Megalodon vs Audi TTS
Просмотров 418 месяцев назад
When you loose you know just how much to improve... Megalodon vs Audi TTS
How I restored my Audi Oil Consumption
Просмотров 11 тыс.9 месяцев назад
How I restored my Audi Oil Consumption
Megalodon vs Stage 2 Hybrid Turbo Polo GTI with a drag race and a roll race.
Просмотров 459 месяцев назад
Megalodon vs Stage 2 Hybrid Turbo Polo GTI with a drag race and a roll race.
How to Engine Flush your car with Liqui Moly
Просмотров 8 тыс.9 месяцев назад
How to Engine Flush your car with Liqui Moly
Take the Enemy out Early, Give them no HOPE!
Просмотров 1839 месяцев назад
Take the Enemy out Early, Give them no HOPE!
How to Change the Outer Tie Rod on a Fiesta ST
Просмотров 2889 месяцев назад
How to Change the Outer Tie Rod on a Fiesta ST
How to change the Gearbox Oil on the Fiesta ST
Просмотров 10 тыс.9 месяцев назад
How to change the Gearbox Oil on the Fiesta ST
Megalodon vs 340I 40 Year Edition with Long Legs
Просмотров 249 месяцев назад
Megalodon vs 340I 40 Year Edition with Long Legs
How to change the Inner CV and Wheel Bearing on the Fiesta ST
Просмотров 50710 месяцев назад
How to change the Inner CV and Wheel Bearing on the Fiesta ST
How to Data Log Your STFT and LTFT With VCDS
Просмотров 35110 месяцев назад
How to Data Log Your STFT and LTFT With VCDS
How to Change the Top Timing Cover on your Audi A4 2.0T
Просмотров 4,4 тыс.10 месяцев назад
How to Change the Top Timing Cover on your Audi A4 2.0T
Will Blending Ethanol with my Fuel Fix Ignition Retardation and I also did a 1/4 Mile Run
Просмотров 7010 месяцев назад
Will Blending Ethanol with my Fuel Fix Ignition Retardation and I also did a 1/4 Mile Run
I Can't log my Car it Keeps BLOWING the MAP sensors up
Просмотров 15510 месяцев назад
I Can't log my Car it Keeps BLOWING the MAP sensors up
I have Audi A4 2.0Tfsi B8 2008. which take 4.6 liter engine oil. Is it safe to use 3 additives during the oil change I want to add (Oil additive + visco stable 300ml + oil saver 300ml )
To be honnest, I don't think it will be a major concern, the only thing that bothers me is the fact that lets say all 3 is 300ml that is 900ml of additives and 900ml of less oil. So its 3.7L of oil and that is quite alot less than normal. I would say rather add maybe 4L of oil and use 200ml of each and then if you need to top up, use the addatives first then. Just a suggestion :) but maybe trying to reach out to Liqui Moly will help you more with some proper awnsers
TFSI VAG Garbage engines! Avoid.
Lol yea a lot of problems 🤣
My vallet key is not working
That is the hardest part. To get the key to work 💔🤣 I saw there is people who jacks thier car up and somehow unlatch the bonnet. How they do it, I do not know
Dose this pcv fix oil pressure warning problem
I highly doubt it sorry 😭 it controls the air pressure in the crank case, not the oil preasure I hope your car is ok. That is not a nice alarm to have
Getting some Chris Fix vibes at the beginning 😂
🤣 He was my super hero 🤣
NIce video bro... actually i was trying to find out whether my HPFP or LPFP is faulty, because everytime i try to accelerates quickly , my Audi A5 will enter limp mode, ESP & EPC lights on, and parking brake malfunction warning appear... i suspect it has something to do with fuel delivery system...
Have you tried using a diagnostic tool? To see what error pops up? It can even be a missfire, over or under boost. There can be so many things that can cause it.
Best explanations about PVC. valve thanks
Super glad I was able to help 🙏🙌 Thanks for the great comment
I replaced mine with the same battery but A4 does not want to start. Everything going on lights etc. When you start it it just cranks. Was driving fine before my battery died😢
That is very odd... I would suggest to get it diagnosed and see why. There must be some kind of fault 🤔 you never said ylu got a nee battery. You only said you got the same battery... That battery is charged hey? 🤣 Stupid question I know lol
Sorry wrong typo😂.. Its a new battery but not AGM almost similar to yours 12v 85ah 668P. I also got random codes like P0016 Camshaft sensor. My windows does not want to work either. Car cranks but does not start. I think I might het someone out to have a look for me. It's pretty weird
My MPGs went down after installing
Thanks for the feedback 💪
Well done. Dankie vir die inligting.
Enige tyd dankie 💪 Share so n bietjie biltong da asb 🤣🙌
Hey man! I have a 2009 Audi A4 that has been sitting and not been started since about April 2023. Apart from the obvious battery, what should I expect to discover (potential oil leaks from dried seals?) I had a motor overhaul in April 2021 most parts including the cylinder head were replaced so the seals only have a couple thousand miles on them. The tires were also brand new, did you find any flat spots on your tires? (I assume the car was stationary during the 3 years, mine definitely is.) Therefore what should I inspect and do before I attempt to crank it up? Also how can I go about priming the motor, bearings and what not? I left it with a full tank of gas, added some Stabil Fuel Stabilizer in April 2023.
Sorry for only getting back to you now. My car was fortunately not as stationary as yours. My car was parked but frequently started and went around the block once every few months. My tires did go a bit flat but as soon as I pumped it up again it was fine. Still using them till today. Glad to see you add some thing to the fuel as the fuel breaks down and looses it's octane... To be honnest I would have just drained that fuel as 3 years is a long time. Also I doubt you will have any leaks. I would have also drained the oil and changed the oil and air filter to make sure that everything is good. Remember there is a reason why they say you must change your oil after a certain amount of miles or time interval such as a year. The oil particles breaks down and won't lubricate the engine properly. To prime the engine I assume your talking about fuel? If so all you can do is turn your cars key to the on position without starting, you will then hear the pump in the back wining. Do it 3 or 4 times. If it is the oil you are talking about, rotate your crank and it will push oil up into the engine
@@megalodononwheels no sir, not 3 years, I was referring to the time your car sat. Mine has been parked since 2023 around February. Also no I’m not talking about priming it with fuel, the car does that on its own. I’m asking how to prime the motor internals with motor oil since after all this time components should have dried up, like the cylinder walls, piston rings, camshafts, rod journals and so on you get the point. I gathered that people recommend to pull out the fuel pump fuse and let the motor crank meaning it won’t actually start and just crank but even that initial crank is enough to cause some damage when those parts are dry. So I’m searching for a way to prime them. Some say pull out the spark plugs and pour a bit of oil in the lobes then with the fuel pump fuse out attempt the crank? And of course even tho it has been sitting for a little over a year, I plan to change out most fluids like the engine oil and all.
Love your wheels man.
Thank you! I am over them now, Want other ones 🤣 been going with these shoes for to long now 🤣
Will this fit a 2016 A3 premium?? The part looks the same but Amazon sayin it won’t fit 😢 I’m about to just order it cause I need my baby to run properly. Please help anyone
It won't fit unfortunately. Sorry to get to your message now. This is the Gen2 motor and you have the Gen3. They are not the same. You will see your pcv has a white part to it and mine doesn't, they work with different pressures when it comes to opening and closing
@@megalodononwheels brother you just saved me time & money! Thank you so much
After 14 minutes mine is at 6380 kPa but it’s still slowly rising. So does that mean it’s an injector? Or it’s the fuel pressure regulator?
Yea it is not picking up as it should. It can be multiple things. Difficult to say what it is by not being there. I also heard that sometimes the furl pump in the tank can go bad and the pressure pushes the fuel bsck into the tank. But yes there can be multiple things
Is this the same as ecs diverter valve spacer sound?
I am unsure if they will sound the same but mine is just a cheap one off the internet
I would recommend getting an aluminum upgraded version, nice tutorial
Ohhhhh I never knew there was an Aluminum one. Thank you 🙌
Nice install video
Thank you so much :)
How long does it take for credits to upload , mine isnt showing latest credits purchased?
Sorry for only responding now. It should appear imidiatley. Just resync the device :)
Could you do a video on valve stem seal replacement please?
Unfortunately I do not have the car anymore :( sorry about it
Как ты его установил? Отверстиями вверх или отверстиями вниз?
Which direction the holes shows does not really matter, I was nore concerned about the direction the lever is to adjust it. So my lever is facing down :)
@@megalodononwheels thanks boss:)
A bit late for the show but glad I found this vid… can you perhaps tell me the part number & where you purchased the bottle from? I’m also from South Africa (I saw the GP plates on the other car 😉)
Lol damit 🤣🤣🤣🤣 All the parts I got from Goldwagen. Just take note I do not reccomend getting the bottle there as i had to return the bottle I bought and had to get a other one. For some reason the second one I got fit much better and was a bit more expensive so I do not know if they have more than one option. The problem I had with the first one was the lid had way to much play even when tighten down. Hope it makes sence :)
@@megalodononwheelsyeah I know what you mean… one more question the pipe that broke in the vid how much was it at ford?
Now that is a question I can not awnser 🤣 I had to replace all 3 pipes as they are super brittle, I think each was between 500 and a 1000 🤔
@@megalodononwheels yoh 😲 but thanks for the info bro 🙏🏼
Thank you! Finally found one with the BC controller. Had to watch a couple of times. But finally got the light to reset. Of course this is after replacing everything on the front brakes. Thanks again!👍👍
Super glad you got it right and everything is working now 😎🥳
I love subaru
Yea the Subaru's around our area are dangerous lol
It happened to my vw 2010 Tijuana . I disconnected the electrical plugs from that valve and then connected again . Do you think it's possible to be solved ? Because indication for engine disapered
Wow that is a tricky one as the light was supposed to stay on because it does not get a signal from the N75 valve 🤔 all I can think of is that the valve is maybe broken in someway that it triggers the light. Best advice I can give you is to plug in a Diagnostic machine and see what it says 👌
Great video, you guys are the only ones that did not seem to have a hard time with that bottom bolt between the turbo and cat.
Lol I think having the right tools is the key 🤣 I nearly quit te job whem I was doing it on my own a few months before I did this video lol 🤣
Searched soo long for how to fix that problem, thank you man. Worked immediately 🙏
Super glad I could help 💪 unfortunately it is not a permanent solution but it is something to work with for time being 👌
So what is correct oil weight for the 2018 Audi q5? 2.0? I’ve been getting mixed results , some say 0-20, 5w-40, 0w-40, 5w-30, 0w-30. What is the correct oil weight
With out a doubt you can call Audi and give them your VIN and they will inform you which one is the correct one :) My opinion... 5W-30 for my 2.0T
You had too much oil in your car. That is going by your Turbo. That is why it's blowing out you're going to need to replace the turbo
Unfortunately that is not the case 💔 The turbo has been reconned not long ago and I have all the tests that has been performed on it to show it passed. These cars are known for this problem
Good info…👍🏼
Glad I could help 🙌
Where did you buy the hose you replaced? Also what’s that top hose called, both of them are leaking on my 2014 fiesta se
Hi. I got both of them at Ford. They have a full diagram on their system that shows all of it. The one goes to the turbo and the other one to the side of the engine. Do change them as quick as possible as you dont want your car to overheat
What page did in the manual tell you the transmission fluid volumne?
Didn't I show it in the video 💔 I am currently in bed now haha. Did you come right? I can quickly look tomorrow if your still looking for it.
Or you can unplug sensor from this diverter valve and it'll make the same sound like this spacer doing
Yes you can 👌 but I would avoid unplugging sensors 🤣🙌
what if "long coding helper" dosen't appear in my vcds?
I am really not sure, there is 2 ways one can do it on VCDS, I haven't done it in such a long time but there is another way 🙌 not much help, if your really batteling let me know and I will have a look for you :)
@@megalodononwheels I tried everything, long coding does not appear and adaptation dosen't work. It's probably not suported in my instrument cluster because it's 2009 A3
Damit it sucks not being there to help lol. Tell me did you youtube or google to see if the 2009 A3 can do it?
So hey bro. Ive got a bit worse scenario here. So basically iam at my family party in some restaurant and some girl parked behind me and I cant get out of my parking space. Her car is complettly locked im trying to help her but when we insert that key into the doors we cant turn it in any way. Im not mad at her because its cars fault its not opening but what do we do in this situation. We are calling towing company rn but what would you do in my situation?
Be mad at her 🤣🤣🤣🤣🤣🤣 Sorry for getting back to you now 🙌 The key must turn, I think because the handle on the key is so small it is very difficult but once one jiggles it and use some force it will turn eventually. They are usually stuck because they never get used
I wasn't even that mad. I've put myself in her position in my mind, and God, that was an awful feeling.
Should i upgrade to the k04 turbo? I would just need the upgraded intercooler. I already have the upgraded cold air intake
Most definitely! I was in a S3 2008 model with a K04 Hybrid turbo and that thing was strong! Sheesh... Even I am thinking of going K04 Hybrid 🤣
Hi where did you buy the downpipie ?and the mini cat link to online store or fb page plese.
Hi, it was made for me at the shop. They don't make them in advance, they make them as they need to. Also I bought my mini cat from a local shop called Liatros Performance
Thanks fixed my issue
Glad I could help 🙌
I had the same symptoms on my 2006 high mileage BMW 316i. I went through a litre of oil every 800km… I changed the valve stem seals, and the car no longer consumes oil or spits out oil/water through the exhaust. Changing the stem seals is a pain though, but worth it and after a while you’ll forget the hardship and the pain of doing the job😂
Ohhhh thanks for the heads up! I will go do some reaserch on the symptoms of bad valve stem seals! Lets hope it is that 🙌🤣
@@megalodononwheels Yeah! I tried the rubber rejuvenating stuff, but on old cars the rubber is far too gone... If it's the piston rings there's not much you can do, besides a full engine rebuild. Changing the valve stem seals is dirt cheap, but is very labour intensive! I did the job for about 150 USD (a cheap timing tool from the Far East included). But you should check if Audis have valve stem seal or piston ring problems. On the Bimmers it's usually the valve stem seals, not sure about the Audis.
Audi it is usually the piston rings sadly 💔 and every second A4 B8 had a motor rebuild
@@megalodononwheels 😥 sorry to hear that
Do you have to do every oil change? Or if it fixed first time then your good?
I would say look at the results after an oil change. If it smokes then add the additives. If it doesn't smoke then your good till maybe the next oil change 🙌👌
Did you notice any differences? And is it safe for the engine?
Yes it is safe. Just make sure you follow the instructions :) Also i never opened the engine before or afterwards to see the difference but I am certain it will work. :) (personal opinion lol)
My cv axle just jumped off from outer cv i think because of that securing ring. pay attention to it
Yes most probably. It will pop out and if not done properly it will leave you stranded next to the road 💔
@@megalodononwheels if you have quattro, u have a back up in this situation :))
Does this system have to be re-pressurised? I can I change this myself or do I need specialist tools?
You can do it yourseld :) nothing needs to be re-pressurised. Just follow the steps in the video and you should be ok. Also watch out for the small pipe it is very brittle
While doing this test its necessary open lights , radio , ac? Thanks
I would say do a test with and without everything on to see what the difference is. But I would say do the test with everything off to ensure there is nothing that will influence the results to make sure everything is charging like it should :)
Nice
Thank you 😎
Audi A3 2007 - when the battery is dead and the car won’t unlock using the remote on the key fob, insert the key itself into the driver’s door and turn CLOCKWISE fully, HOLD, and open the door handle. Turning anti-clockwise will lock the car again.
Thank you for adding 🥳🙌
Amazing, man. Fixed my Ranger immediately. Thank you.
Super glad to hear that 🙌 just note it is not a permanent fix 👎 I think these stock radios has a problem with the bluetooth system from production
Thanks for this bro you saved me a lot of headache and helped guide me along my first ST brake change 😊
Super glad I was able to help 🙌 the rear brakes can be a bit tricky I wont lie lol
My 2012 manual doesn’t have the sync Bluetooth fuse
Damn... Does it have the metal pieces on the inside for a fuse? Maybe you have to put one in
Where did yours leak from?
My filter cap turned loose and started leaking from the cap. But the revised filters cant turn loose on their own
Hello I have exactly the same engine as you I follow all your videos, I have a little problem when starting a smell of gasoline appears, but only when starting, I was told that it was normal, while the revs stabilizes ?
Hallo hallo, thank you for dropping a comment 🙌 And glad to see there is someone else out there that alsp has the same engine 🤣👌 Ok do you smell it in the car or when your outside? Also is your car under a carport or in a garage? Ooooooor outside in the open. In general it is fine. The ECU fuels a bit more than usual to try and get the Catalytic to heat up. If you smell fuel even when just driving around and all that then it is bad
@@megalodononwheels 😄Yes exactly but it only happens when starting the car it smells from the exhaust You thinks ist normal ?
Yes it is normal. Even with my car I can smell the fuel on cold starts :)