Primal Van Life
Primal Van Life
  • Видео 28
  • Просмотров 97 703
Fitting an aftermarket bumper on a VW T4 Syncro
I’ve never really liked the colour coded bumper on my T4 Syncro Doka.
So today rather than being apathetic I decided to fit a bumper I bought off Just Kampers a few weeks ago. I knew it would need a bit of trimming and I’d have to cut a hole for the gearbox cooling vent. Like most jobs I undertake, 30 to 40 percent of the time was spent looking for tools, in total it took me a couple of hours from start to finish.
It’s a fairly easy job, probably a 1 out of 5 but most of the agro was because the Just Kampers bumper didn’t quite fit as well as standard but got there in the end. 😀
Просмотров: 7 818

Видео

Making progress
Просмотров 1826 лет назад
I’ve been working on the interior of the demountable camper. I’ve made a fold up counter top, some new cupboard doors and finally decided where I’ll fit the compressor coolbox.
Fitting the locks to the locker doors on the demountable camper
Просмотров 8386 лет назад
I'm trying to get the demountable finished next month hopefully. I know its been some time since I upload a video so my apologies, I sort of fell out with the project but now I'm really focused and committed to getting it finished. I've also been offered some help by a good friend of mine Patrick which should speed things up.
VW T4 Syncro - The Van
Просмотров 3056 лет назад
Night in the snow wild camping with my son in my T4 Syncro 😀☃️
VW T4 Syncro Tour de France Trip Part 3
Просмотров 1,2 тыс.8 лет назад
Part 3 of my trip to the Tour de France in my VW T4 Syncro
VW T4 Syncro Tour de France Trip Part 2
Просмотров 9778 лет назад
Part 2 of my trip to the Tour de France in my VW T4 Syncro.
VW T4 Syncro Tour de France Trip Part 1, UK to Swiss Alps in a day
Просмотров 1,9 тыс.8 лет назад
Part 1 of my trip to the Tour de France in my VW T4 Syncro. I drove from the UK to Switzerland in around 24 hours avoiding toll roads.
VW T4 Syncro Van Life Intro video
Просмотров 1,7 тыс.8 лет назад
Let me have comments please. I was thinking of adding this to the start of my video, what do people think, is it too long?
VW T4 Syncro Cheap DIY Suspension lift Part 1 - Lowering the rear diff
Просмотров 27 тыс.8 лет назад
This video briefly explains the first stage of raising the suspension on a T4 Syncro. Its a good idea to lower the rear diff so as you do not run the rear drive shafts at too acute angle which could put stress on the CV joints. The height of the spacers is 21mm for the rear spacer and 15mm for the front spacer. Rather than using solid pieces of ali bar with holes drilled in the centre like me, ...
Update of what has been happening
Просмотров 1,4 тыс.8 лет назад
I've not posted a video since the end of last year, so I thought it was about time to get cracking. The Suntrekker must be finished soon because I'm selling my house and will be effectively house less and will need somewhere to live, even if I don't sell my house it would be good to get some use out of it.
Fitting a speed controller to a roof vent fan on a T4 Syncro camper van
Просмотров 2,4 тыс.9 лет назад
Today we fitted a cheap eBay motor speed control to the Fiamma Turbo vent on my friends T4 Syncro. This was so he could slow the fan down as it was only single speed and quite noisy, he needed it to be usable whilst he slept at night. Now it can be slow down so it is whisper quiet. We bought the speed controller from www.ebay.co.uk/itm/10A-DC-12V-24V-36V-25Khz-DC-Motor-Speed-PWM-Control-Control...
Fitting a fan assisted roof vent on VW Transporter T4 Syncro camper van
Просмотров 6 тыс.9 лет назад
In this video we document the fitting of a Fiamma Turbo roof Vent 28 to my friends T4 Syncro, this roof vent is similar to a fantastic fan
Side panel locker construction
Просмотров 2679 лет назад
I obtained some aluminium frames for construction the side locker doors. It took nearly 50 feet of angle grinder cutting to get the cut out, this is a good way to upset your neighbours.
Sink fitting and a nasty surprise
Просмотров 1489 лет назад
Sink fitting and a nasty surprise
Quick update, Gas hob removed, smev sink test and floor started
Просмотров 2,2 тыс.9 лет назад
Not much has happened on the demountable as I've had problems with my T4 Van, looks like the big ends may have gone :( Just waiting to get a second opinion. In terms of the demountable, I've started work on the floor, removed the gas hob and started fitting the smev sink.
Sink removal and a few small jobs.
Просмотров 879 лет назад
Sink removal and a few small jobs.
Carpeting panels, electric control panel and window blinds
Просмотров 4529 лет назад
Carpeting panels, electric control panel and window blinds
A bit more progress, started carpeting and added more insulation
Просмотров 3199 лет назад
A bit more progress, started carpeting and added more insulation
Bed support / cargo rail completed
Просмотров 1,2 тыс.9 лет назад
Bed support / cargo rail completed
Adding plywood panels for the aluminium tracking that supports pull out bed
Просмотров 1739 лет назад
Adding plywood panels for the aluminium tracking that supports pull out bed
How to support the bed and clear the blind? Adding battening to the roof
Просмотров 849 лет назад
How to support the bed and clear the blind? Adding battening to the roof
Bit more insulation done and I've spotted a problem with the pull out bed and window blinds
Просмотров 999 лет назад
Bit more insulation done and I've spotted a problem with the pull out bed and window blinds
Repairing the original side panels from the camper
Просмотров 1,9 тыс.9 лет назад
Repairing the original side panels from the camper
More interior panelling and insulation on the demountable camper.
Просмотров 2899 лет назад
More interior panelling and insulation on the demountable camper.
Insulating and carpeting panels on the T4 DOKA demountable camper
Просмотров 1,5 тыс.9 лет назад
Insulating and carpeting panels on the T4 DOKA demountable camper
Fitting side panels onto the demountable camper using riv nuts
Просмотров 8989 лет назад
Fitting side panels onto the demountable camper using riv nuts
Quick update of my progress (or lack of) on adapting the demountable camper to fit on the VW T4
Просмотров 6909 лет назад
Quick update of my progress (or lack of) on adapting the demountable camper to fit on the VW T4
Quick intro to my VW T4 Syncro DOKA and Suntrekker demountable camper conversion plans
Просмотров 36 тыс.9 лет назад
Quick intro to my VW T4 Syncro DOKA and Suntrekker demountable camper conversion plans

Комментарии

  • @Syncro16TDi
    @Syncro16TDi Месяц назад

    It's a T4, not a Type 4. A type 4 is a VW 411 or 412. Also, there's no such thing as a Type 25, that's a T3. All vw Transporters are Type 2. A split is a Type 2 T1. A Bay is a Type 2 T2. A wedge is a Type 2 T3 etc etc. You have a Type 2 T4.

  • @YouTubeClient-yw9ty
    @YouTubeClient-yw9ty 6 месяцев назад

    Hello, your content is great, and the thumbnail design is very attractive. But your channel needs to some improved. Also, your video title is not SEO-friendly. Your video title, description, and tags if you are doing SEO. Then you will get more subscribers and viewers. The right decision by you would have improved your channel very quickly. You will get monetization very fast as your video views and subscribers increase. If you have a good channel, you can comfortably spend your whole life with it. I will help you all the way until you monetize. I am a RUclips marketing expert. So if you need any help, please discuss it with me.

  • @mr.hauskatze6055
    @mr.hauskatze6055 4 года назад

    Which tyres and Size do you have on the crew Cap. They look amazing

    • @primalvanlife5581
      @primalvanlife5581 4 года назад

      Mr. Hauskatze they are BF Goodrich Mud Terrains 225 / 75 16”

  • @marvinalleyne6572
    @marvinalleyne6572 4 года назад

    Where did you get that rack from …on the blue van

    • @primalvanlife5581
      @primalvanlife5581 4 года назад

      It’s a rhino roof rack off a T5, they’d spelt rhino wrong on the eBay advert and I won it for £10.50 😀

  • @storm6352
    @storm6352 5 лет назад

    Hi would you like to sell the Doka?

    • @primalvanlife5581
      @primalvanlife5581 4 года назад

      Not at the moment but thanks for asking

    • @storm6352
      @storm6352 4 года назад

      Ok 👍 when you do please let me know

  • @derbydrifter
    @derbydrifter 5 лет назад

    Great video mate, thanks for posting. I may need a new front wing on my t4 and was wondering how easy it is to remove the bumper to get to the lower fittings. Now I know. Cheers.

    • @primalvanlife5581
      @primalvanlife5581 5 лет назад

      Cheers. The wings are held on with about 7 or 8 bolts so you can drop them off in a few minutes. 👍

    • @derbydrifter
      @derbydrifter 5 лет назад

      That's great to know. Thanks again.

    • @makjames1714
      @makjames1714 4 года назад

      @@primalvanlife5581 Some of the T4's (Short nose) the wings are welded on. Wondering how easy it is to cut them off and refit with a bolted one.

    • @primalvanlife5581
      @primalvanlife5581 4 года назад

      I imagine it would be tricky as the bolt holes won’t be there. My mate needs new wings on his van and it’s an early one with the welded on wings so I’ll have a look when he cuts them off.

  • @rootin1234
    @rootin1234 5 лет назад

    Hello, Could you please tell me how is you roof rack mounted? I do have the same, but i don't remember how it was mounted. Thank you

    • @primalvanlife5581
      @primalvanlife5581 5 лет назад

      Hi, the Rhino roof rack is bolted through the rain cutter. I don’t particularly like bolting it here as it impedes the flow of water however I did for two reasons. To keep the rack as low as possible and the other reason is that the metal is triple thickness in places in the gutter as it’s where panels meet and the roof cross members finish.

  • @jeremiahresurreccion2350
    @jeremiahresurreccion2350 5 лет назад

    Where's the part 2?

  • @Rudis_Garage
    @Rudis_Garage 5 лет назад

    Need the Syncro the hole in the bumper for cooling the gearbox or a Syncro part? I got an Syncro to from 2002 with same bumper but with no hole

    • @primalvanlife5581
      @primalvanlife5581 5 лет назад

      Rudi #23 you should have the hole for extra cooling, lines up with a hole in the belly pan. Hopefully the part is still available.

  • @francenomadvwt4
    @francenomadvwt4 5 лет назад

    no part 2 ?

    • @primalvanlife5581
      @primalvanlife5581 5 лет назад

      fabien vie en fourgon/van apologies, i haven’t got round to it but you comment has prompted me to get it done soon

    • @francenomadvwt4
      @francenomadvwt4 5 лет назад

      @@primalvanlife5581 yes your videos are really interesting ! keep going 👍

  • @nedwilliams3948
    @nedwilliams3948 6 лет назад

    Hello there from sunny Devon been watching all ur videos flat out, just wonderd if you are still looking at doing something else instead of the trekker im looking for exactly this if your interested in selling it my email is e.s.a.w@hotmail.co.uk cheers ed

    • @primalvanlife5581
      @primalvanlife5581 6 лет назад

      Hi Ned, yes I’m still probably going to sell it. I’ve still got a few jobs to do and I’m hopefully going to have it finished at the end of the month.

    • @nedwilliams3948
      @nedwilliams3948 6 лет назад

      Van Life give us an email on price can you if that’s cool? Don’t want to mess you about if I can’t afford it cheers

  • @harleywainie
    @harleywainie 6 лет назад

    Nice job clive 👍

  • @CEEFITNESS
    @CEEFITNESS 6 лет назад

    Sick video! Stop by and leave some positive energy on my latest video! Looking forward to seeing you there!

  • @davecole8086
    @davecole8086 6 лет назад

    Hi what made you bin this project? Im in the process of doing one, cheers Dave

    • @primalvanlife5581
      @primalvanlife5581 6 лет назад

      Hi Dave, the main reason is that it just doesn’t look quite right on the truck, this is because the suntrekker is a bit narrow for the bed really. The other reason is that I prefer to mainly wild camp in my van and the DOKA just stands out too much with the demountable on. I’m now planning to release be the bed and add a grp cargo body that is permanently attached to the DOKA, and have it kitted out like a basic camper van, that’s all I need really. It won’t be very big, approx 9ft long and 6ft 6 wide, I’ve not decided on the height yet but not too tall. What have you got?

    • @davecole8086
      @davecole8086 6 лет назад

      hi ive got a Multicruiser its a big old girl, very heavy so im fitting airbags to help. Are you on the T4 Forum? i could send you a pm, Dave

    • @primalvanlife5581
      @primalvanlife5581 6 лет назад

      Hi Dave, would be interested to see what you’re doing. Is yours a syncro? I’am on the forum but don’t use it much. I have a blog at t4syncro.com and there is a contact page that will send the message via email and I can email you back. Cheers Clive

  • @aratanatar
    @aratanatar 6 лет назад

    what did happen - isit finished ?

    • @primalvanlife5581
      @primalvanlife5581 6 лет назад

      I did pretty much finish the interior, I needed it out of the way as I was selling my house so shifted it to a friends house. Planning to move it back to my place next week to finish a few bits. I decided I don’t really like the concept or look so I’m planning to sell just the demountable in spring. I still have the truck and the new plan is to build a grp box that sits on the back permanently. This is definitely going to happen as I’ve recently been given a price for the 50mm thick foam core grp panels and I’m speaking to a guy at my gym next week who builds truck bodies and he’s going to give me a hand. Hopefully I’ll add a video soon and I plan to document the build process for the new pod.

    • @aratanatar
      @aratanatar 6 лет назад

      I wish you good effort ...I was looking a long time for a T4 with 4 wheel drive ,but in Germany you pay a fortune on a car that is in good shape while they have all mostly more than 250.000 km on the counter...:-D

    • @primalvanlife5581
      @primalvanlife5581 6 лет назад

      aratanatar thanks for that and I wish you good luck in finding a T4 syncro for a reasonable price 😀

  • @HaraldHansen
    @HaraldHansen 7 лет назад

    Any word on when part 2 is going to be out? :)

  • @rigomrtz
    @rigomrtz 7 лет назад

    I use mastic strips for the seal lasts longer than sika , good video ta

  • @clarkspiemuncher24
    @clarkspiemuncher24 7 лет назад

    i have just bought one of these vents and while the cutting the hole is not a problem i am lost as to what wires go where if your able to help with that please ? as i am a carpenter not an auto electrician

  • @AndrewPattullo
    @AndrewPattullo 7 лет назад

    big van ! my old grand voyager i fitted stainless steel tops looks slick - but quite heavy ! tip get a pro to cut it ! give him the template- as i found out i just ruined the stainless tops- trying to cut them!

  • @nickpashley5258
    @nickpashley5258 8 лет назад

    Hi there loving the videos just a quick question and you probably heard it all before what size springs are using and shock absorbers ? I am yet to add my spaces to my Syncro I have already added some left but I would like to get a little bit more 😜 Thanks Nick uk Somerset 💪

  • @primalvanlife5581
    @primalvanlife5581 8 лет назад

    It's the same as my last video but I got rid of the talking and shortened the video a bit.

  • @NaturalSpaSupplies
    @NaturalSpaSupplies 8 лет назад

    Done it!

  • @mattwilkie
    @mattwilkie 8 лет назад

    Great straight forward tutorial.

  • @rikkiesix
    @rikkiesix 8 лет назад

    You should eather keep the window for light inside or maybe put a oneway window for some more privacy. Just a idea. Im watching all your video's in one time. Like it a lot. Keep it up. The camera is a big upgrade :-) Greetings from Belgium Erik

    • @primalvanlife5581
      @primalvanlife5581 8 лет назад

      Thanks Erik and thanks for the comments. Not much has been done lately to the demountable as I've been concentrating on getting my other van on the road. It is now up and running so hopefully after Xmas I can start working on the demountable again and posting some more videos. Cheers Clive

  • @Demountablecampergroupcom
    @Demountablecampergroupcom 9 лет назад

    A few of our members have owned suntrecker's in the past demountablecampergroup.com

    • @primalvanlife5581
      @primalvanlife5581 9 лет назад

      I will check out the forum and also subscribe to your channel, hopefully you'll do the same. Thanks

  • @jeffmoore5178
    @jeffmoore5178 9 лет назад

    Great job buddy.... It's taking shape.. Keep going. Jeff

  • @jeffmoore5178
    @jeffmoore5178 9 лет назад

    Keep it buddy... I'm watching,I think your doing well.! And you also have a blue van?! Jeff

    • @primalvanlife5581
      @primalvanlife5581 9 лет назад

      Thanks Jeff, I'm trying to do at least one job per day, even if it's a small one. Yes, I also have a blue VW T4 Syncro (4x4). I'll give a bit of a tour of it as soon as I get it emptied; I'm using it as a bit of a shed at the moment. :)

  • @Gabriel.Leni100
    @Gabriel.Leni100 9 лет назад

    would love to see you finish that projekt! keep them coming! Good Video

    • @phoenixsp1
      @phoenixsp1 9 лет назад

      Thanks. I should be getting back to work on it very soon now the weather has improved and will post another video. Cheers

  • @floydsterism
    @floydsterism 9 лет назад

    This is how some rv'ers and work campers make extra money while traveling. bit.ly/1vMo1Kt