Видео

I have the 2012 mkx Theres no back up cam on it.

What is the redline?

Did they run a tach pickup to the engine when you did the dyno pulls?

The thing sounds like a Zonda from the inside. Damn is that impressive, what exhaust are you using?

This is so sick. Currently a dream of mine to swap a 2GR in my MRS. Seeing this makes me more motivated to save up enough to finally do it!

Just fantastic, thank you!

The video super really helpful, theNissan Altima, piece of shit design, has to remove the whole bumper just to replace the headlights, omg.

Did this leak ?

I’m about to start buying parts for my Mr-s 2gr swap any tips? Did you have to cut the firewall?

So simple, thank you!

How did you handle the tach recalibration?

Great video and super helpful format. Only thing I wish you went into more detail is disconnecting the wiring harnesses. It may seem simple but I was worried I was going to break something.

This video helped me install my new lights in the most simple easy way fr thank u so much u saved me a hassle fr

I'd love it if I could actually see half of what you're doing

this video was so helpful to get started, thanks.... just installed replacement back-up cam yesterday, here are some additional things I noticed/some more tips: make sure you have the right tip to unscrew the bracket ("T20 Torx", or I just went through my box of various sized/shaped bits and found one that fit). the space between the screw and the metal panel is *tiny* so it really helps to have a 90 degree allen wrench/torx tool, but I didn't have one so I managed used my extra-small screwdriver with interchangeable tips; it worked but it was tough and I scratched up my hand in the process. the actual removal and replacement of the camera is the easiest part, and the cords remove and reattach just by pulling off/pushing on, no pinching or release required, which is super helpful in that tiny space. taking the plastic panel covering off was a bit nerve racking... I tried to be careful and pull gently but in the end I had to just rip it off in certain places, but nothing broke. one plastic retainer/fastener clip got stuck in the metal panel but I easily pulled it out and put it back in the plastic panel. putting the plastic panel covering back on took two of us to line it up and then we basically just lightly punched it all over to get the clips to click back in to place. My local shop didn't want to do this "repair" and the two dealerships I called charged $180 just to diagnose, and then estimated it would be $500-$1,000 to fix/replace the camera. I bought a replacement for $49.99 plus tax on Amazon www.amazon.com/gp/product/B09R3JQPJK/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1. So far it's working perfectly (fingers crossed). Try it yourself, YOU CAN DO IT!

It’s when we change air bag we need change combination switch I change air bag but my car airbag light it’s still on how to i reset?

Best bumper removal on RUclips for the altima. Straight to the point and shows exactly where each bolt, screw or clip is. I have a crack that i need to fix and paint and also need to replace the radiator one day. Thanks for all the helpful tips!

Got the camera on Amazon for $45, and put it in less than hour. Thank You!!

Thank' so much I had the same car and verified every detail of this car for repairs.

whats the screwdriver peice you used?

Good information! I unfortunately got myself into a three car accident which was unfortunately my fault so knowing im going to be paying more im gonna fix my bent rim, head light assembly, and my passenger side mirror that fell off but luckily can be reattached

My god is this the best instructional video ever. Straight to the point. I love the text and arrows. I can easily pause and follow along. So much better than hearing someone talk and they get side tracked like….. “ well my wife hit a deer and smashed the headlamp, so we filed insurance and blah blah blah”. Great job man!

Love your style! No talking just show me! Thank you!

I know so many others have left comments already… but if this helps, as of November 29, 2023.. it’s really helpful! You don’t have to lift your car up with a jack if you don’t have one. It makes it 10-20% slightly harder to unscrew some things. But it’s doable. You’ll need a 10mm bolt or 13/32 for a perfect fit. A 3/8 is slightly too small. Thank you so much. This video really makes the process easy for me.

My backup camera doesn't work all the time what should I do to check it

Well explained in detail thank you very much. Also the fluid windshield container should be easy to reach at this point right? Thanks.

Just changed my head lights using this video. Thank you for saving me a couple hundred buck not going to a mechanic 🙏

Thank you so much! Liked and subbed ❤️

great video!

legend

You helped us so much. Light lamps are changed. Thank you.

Just finished changing the lamp kits on my daughter’s 15 Altima. Followed along with you, fantastic job!!! Thank you!!!

So i just did this today. Bought completely new headlights. When i removed the headlights there was only ONE bulb adapter to take out, the low beam was hardwired inside the lense somewhere. My new headlights were completely different in the back. Had 3 people come over and look at the factory headlights and every one if them were like WTF?! Was so depressed putting my old cloudy headlights back in.

So replacing the headlamp assembly enjoys essentially involves removing the front bumper assembly.

The video was on point and I watched a few before yours. Thanks! My notes: Rather than fully remove the bumper, i put two stools underneath and set the bumper on them. I watched a video on aligning the projectors. After reassembling the bumper i had to align light by entering through the wheel well with 10 mm crescent, because i didn't have a *long *thin Phillips. The headlights I used where Nilight $170 pair from Amazon, with black housing. Came with bulbs. Having two people was helpful when aligning through wheel well. Process was easy but still took me a few hours. Result is great and glad to have full headlights. It's the little things in life. 👏🥂🤸🚗💡👍✌️

Great, detailed and to the point video!! I had to browse through dozens of crappy vids before I found this one! Thank you!

Great video man! Did you just use cheap Amazon/eBay head lights? If so how are they holding up?

I just replaced my headlight assembly following this video. Thanks for posting!!

Why would they design the car that way?

Weird, I have a 2011 MKX and the videos for it and the Ford Edge were totally different. Decided to take a look at this video and that's how my camera is mounted! maybe they made a mid-year upgrade to the 2011?

Man I really really need to tell u that I greatly appreciate this video!!!! I was able to replace my headlight covers, well basically everything in your video lol. I wish I could send u something Starbucks or something!!! Thank u so so much!!!!!❤️🙌🏾

Can`t thank you enough for posting this. I just changed my headlight assemblies on my 14 altima. this video made it sooo much easier. thanks again!!!!

You dirty as hell for not showing me how to put this back together

Any chance you can go over the clips for both sides in more dealtail? Once I got the 10mm bolt out, I wiggled the clip on the right and it came out. Left one was more difficult. I can't seem to get them back in the right way though...

Great video thanks

Such a great video. Short, to the point, and all the info you need to do the job. Thank you!

quick, simple, and straight to the point. thanks man!

I just changed them by my self. Thank you so much, your instructions were very clear.

If just replacing one side, does the whole bumper have to come off?

Terrible design to have to go through all that BS just to replace the whole headlight housing.