Видео

Hi, one of the silver pins in the 4-pin power supply connector socket is not making contact unless I hold the inserted power cable at an angle. Is is possible to open up that power connector socket and re-solder those pins? I have the ts300 rs gt.

I have swapped psu but wheel still does not turns or any ideas what can be at fault?

Hey there, I love your tutorial but I can't get it to work :( My laptop psu is 19 V 4.74 A 90W I do it just like you, I also get 19V through the cables when testing. If I plug it in though nothing happens, only reaction I can get is sparks. I am not uskng a fuse. The original power supply was smelling burnt and was also shooting sparks when plugged in... What else could be wrong with my wheel?

I did this to my T150 with a 24v power supply, I followed same steps and I am not using a fuse. It seems that I can turn it on using usb without problem, I don’t necessarily have to plug in usb first. It is noticeableably faster and stronger. I didn’t go with 30v because I read on a forum that the wheel starts to reduce current which translates to less force feedback, at the cost of a faster rotation speed. 24v was a good middle ground between the two, I felt actually torque and speed increased.

I know this is an old video now, but im sure my internal psu has gone, i got it fsulty from ebay the usb says descriptor fsult, the wheel foesnt turn or anything and if i test voltage from the psu that goes into the board i get zero volts, but i do get volage straight from the plug to ths TX, will be giving this a try tomorrow.

Thank you! I bought a dead 'new but returned' T300RS GT off eBay for cheap and was able to resurrect it with a 24V 6A laptop PSU. Using a 3A fuse currently. No issues so far.

Need ur help, i follow all the steps and setting but it doesnt power up still. Not sure why? The ac adaptor that i use Model#: FMV-AC323 Laptop Charger INPUT: 100-240V~ 1.35-0.6A, 50-60Hz OUTPUT: 19V 5.27A 100W Connecter size: Int. Diameter: 2.50mm Ext. Diameter: 5.50mm

I need help. Do you have an email where I can send you photos?

Parabéns pelo vídeo! Tenho uma dessa e estou com problema no foco automático e o problema é na câmera mesmo não é na lente Você poderia me dar uma ajuda

Im looking for a powersupply but I see differences in amps. You use a 4.5A charger. Is there a minimum ampares the charger needs to have? The charger im about to buy: 19,5V 3.34a 65 Watt

hello help m epls are u there

Is the fuse 5x20 or 5x30?

Hi does the usb lead need to be plugged into the pc/Xbox for the base to receive power?

quick question im no wire or election expect so my dell power supply have 3 wire i kmow white positive and black is negative but i got this green wire what should i do with it

My T300 Ferrrari edition used to abruptly turn hard left in-game (iRacing) and power off out of no where. Then it turns on after 15-30 minutes. This time it didnt turn back on at all. Would you know what might have caused this?

The links don't work just so you know.

You dont need to to all of tihs is you just replace the FOD4216 Triac. The psu if not blown is just on standby as the triac activates when plugged into a USB port. Witout that it sits in standby giving the impression of it being dead Watch ruclips.net/video/cbTY9QriLdo/видео.html for a proper way of fixing your t300rs

Hey! Do you recall what the signs of a failing PSU were? My wheel base has a flickering red light, a loud whine and produces an awful sound when turning (also very hard to turn). Do you think that's the PSU? If so, how difficult is the soldering on this fix, for someone with no prior experience soldering electronics?

very useful

hi, you did very good job but i have a quiestion to you, we have a 4 pin jack to main board why did not you give 5v volt the other red and black cable you give only 20v , in this way only when we give 24v to board it will works or not ??

Can anyone help me: I have the issue that my tx doesn't steer to the left with full power anymore, but to the right everything seems fine. I don't know if it's a power supply problem or some circuit inside that's broken. I don't know what to do. :( I hope I don't have to buy a new one.

My son is looking at a used wheel with a bad power supply. I'm comfortable doing everything in this video, but I have a couple questions: I didn't follow what you were talking about with the USB power from the original power supply. Is there a USB port on the wheel that is being abandoned? Your power specs appear to be different from what we're being told the wheel uses. Are there different sub-models of that same product? We're told it's 25v, 2A, 50W. That's still a pretty standard laptop power supply, but I wanted to get clarification.

THANK YOU FROM THE HEART....You are really a Gem....I didn't get the lenovo round jack connector even i got usb one But i followed your Instruction and did it...My TX Base is Working properly...From India.......Thank You again and again...

scusa ma come mai non hai collegato anche gli altri 2 pin al morsetto bianco?

I saw a different video that was like this but they kept the same power supply, The problem was with the little board that detects USB connectivity, user simply bypassed the USB detection

I made the same thing according to your Guidelines it fucking works awesome 👌 thanks for the guidance man

Hello, I the throttle and clutch of my T300 stopped working. Brake works perfectly. Tried multiple pedals also Pedals work perfect on another T300 base. I have replaced the t.rj12 to 6 pin connector but the problem stays the same. Any ideas?

Didn't work. used the same power supply, same fuse (in amps as well). Used a multimeter to measure the output of the old power supply and didn't show any voltage. Did everything in this video to the letter, checked that the voltages and amps are running in the new setup (multimeter showed that the correct output 20v but 0.5 amps for some reason). when plugged in, i got a blue spark and the wheel wont light up.

Will this work for a tmx base too?

so what is the original wattage of the T300 from the factory? I ordered the exact same one in the vid (20v, 4.5A) just because it worked and people with 24v 5 or 6A happen to not be working

It s not reality to open base !! It s simply impossible to open on oneshot

useful video thanks

Hi do you do repairs for the t300

Hello, maybe you can help me ... Please answer me ... I own a Thrustmaster t300rs GT edition steering wheel but I misplaced my power supply. Impossible to find one on the market so I will have to make it. However since this is a 4-pin power supply there are 2 pins which I suppose should receive a voltage of 220 volts but I don't know which of the 4. And the other 2, if they are bridged, or .. .I dont know... ? Can you help me using a multimeter. Thank you.

Will this work with TS-PC Racer?

What glue did you use to to get the grips back on body?

Hi there. Do you think it is possible to change the power socket to a normal 3 pin? I lost the original cable and it is not possible to order one and have it delivered. Could be cool you making a video on that :)

I literally searched this video up cuz i missed the days when Sebastian won in my home country

this is the best video on RUclips.

Buongiorno come mai non hai messo un alimentatore da 30volt? E come fa a funzionare con uno da 20volt?

Hi can you tell me if possible to connect a cable direct to infront 4 holes port?if yes can you tell me colours of cable How many cables need And where is the hole to connect? I appreciate your help.

Hi, in case I use a 20v charger with a 2amp current do you think i will need a fuse? From what i found throughout the internet the original power supply of the wheel needs 24 volts with 0.75 amp which is not a lot.

This will work for the T300 to I guess? I have no power in mine now? Any tips on where to start looking?

Hi.. I have spotted a cracked component on the board, and I need some help identifying what it is exactly. It has MCC 43A marked on it. Is there anyone here who may be able to help with finding a replacement part?

Hi my thrustmaster is died for this problem mcc43a part where i casn find it

Great video 😁 any idea where we can find this fun little car?

Did this and can't get it to work still now power or motion any ideas?

I tried this, I'm getting 21.5v at the plug but once into the board I'm getting 15.5 what could be my issue?

My power cable is gone and I need to mod my T300 wheel to use another cable with an EU wall socket. Is this doable for a know nothing about electricity person? There are no more cables around to buy. Thrustmaster used a unique cable.

Thanks for the video just did this mod and it fixed my tx that died. Thanks so much again