Видео

I’ve got an issue where the machine primes…. But no coffee/ water comes out of the dispenser. Every year the same problem with a $200 service fee. Would love to know anyone who would know how to unblock the dispenser….. cheers

great hack, dude, thanks for it

You are a GENIUS! Thank you so much! A hug from Portugal!

Legend 👍👍

Thanks man. You’re idea worked a treat.

Thanks! Was just gifted this machine. It sat for a while so the pump just ran and shut off. Wouldn't prime. I had a syringe, so I forced water through the system, and it started working! Now to figure out the idiosyncrasies of this machine! Got a good cup of espresso already though!

Thank you very much. You saved me many hours of work, because I was determined to take the whole device apart and look for a fault in the water pump

Thank you so much for posting this! The fix worked for me as well. Unfortunately, I added two more syringes of water after the blockage was cleared, and now water is dripping from the steam wand when the machine is on (and for some time after I turn it off). I'm assuming I'll have to disassemble the machine to fix this issue. I was hoping you might have some advice on what I'll need to replace/repair.

OMG i remember this… wasn’t there that pirate/sailor song?

Thanks for this video. I managed to clear the blockage. Unfortunately it looks like my pump gave up as now the water runs through but I'm still stuck on error. Was worth a try though :)

It’s working

Thanks to this video I grabbed a hand pump for a bike tire (racing or mtb). Nozzle fitted over the thingy and I pumped some air into the system. So it works even without water. Thanks for showing me the way to a fix.

It works!

thank you my brother

Thank you - worked like a charm.

Absolute genius. Exactly same issue and in storage for 6 years. You have saved an expensive amazon purchase. Many thanks for your ingenuity, Helen, in Toulouse France.

You don't state whether the pump was activating or not. I have the rotating lights and no pump noise, so it's not going to prime without a working pump. I presume your pump was working and making a noise but it just wouldn't prime?

THANKS SO MUCH FOR THIS TIPP. It’s such an easy fix and worked fine for us!

Thank you so so much! You are the single most greats man that ever lived

In the Odea user manual says that you prime the circuit by dispensing the water from the steam spout

Your video inspired me to just run the steam wand a few times, thinking that the pressure might be higher and dislodge or clear up whatever was in the pipes, and it did! I can now descale the machine! Thank you for the inspiration!

5***** Thank you for the tip, man. My Talea Giro was in storage for 5 years. I could not prime it at all... Did what you did with a 20cc syringe and a tube from my reverse osmosis unit. Had to soften the tip of the hi-pressure tube with a lighter to get it on. It did not even have to be tight... I just held it by hand. All worked. Thank you. Off to descaling. ;-)

FIXED MY SAECO VENDING MACHINE!!! THANK YOU SO MUCH!!!!!! :D

WOW!! A friend was cleaning out their house and gave me one of these. Her son had left it behind a few years ago. She didn’t know if it worked or not. I could not get it to prime and was thinking of replacing the flow meter/pump. Decided to try your method after seeing other posts from people who had theirs sitting for a long time without use. It is brewing coffee now!! You have saved me a great deal of time and money. I was thinking of taking it in to be repaired, since it was a free machine and it might be worth the $$ to have it repaired. I used the syringe that came with my Sawyer mini water filter. It squirted out some water , but not too bad.

So I have the same problem, I can not prime my Exprelia Evo. Tried this with a syringe and ended up with a puddle. I most likely openned up the valve inside and now the water flows freely from the water tank trough the machine and I can't stop it. It didn't work for me. But noce video and explanation.

woah i remember performing here, i’m somewhere amongst the violinists 😂

Amazing worked fantastic!! Thanks

it worked for me thanks

Thanks - worked like a charm. I'm very appreciative of your help and putting this video together!

You are awesome. Thanks a million this worked! Had been unused for 3 years and given to us. I didn't have the plastic tubing so just squirted in two syringes of water. Bingo! Was about to give up, but good old RUclips came to the rescue again.

Thank youuuuu !!! It works. After an hour trying many things, I finally saw your video and repaired my coffee machine with a seringue. First the water and the steam came out the left pump but no coffee in the cup. I pumped several cups of water and when I re-tried I got coffee and saved many 💲💲💲

Thanks. I am on my way to a hardware store and plans to buy a tube and pressure bottle. I hope it will work and hope to save me from buying another machine. Thanks

i have the same problem, i will try this solution! thanks

Thank you so very much! I bought a Saeco Xsmall new in box at a fleamarket, for next to nothing, but alas that wouldn't prime either - pumped water through the intake nozzle like you did (but without the tube, just held it on as tight as I could) - problem solved, and I got myself a bargain. Thank you very much!

i was in this video! I loved elvenwood!

Was in year 2 playing the 3rd violin!

i play in banksia concert my friend got the solo for ellevenwood i was reserve

yeah

Too bad arts unit won't be able to provide shirts this year..T_T

i preformed in the cello section. true story!

same

I agree. Do you have any more movies from previous years? My daughter was there last year and this year but she goes to highschool next year so unless she can go as a helper that is it for us. Michal

Thanks so much for that. I wish they made a DVD of the whole concert. It was great