Видео

@joshl1984 Yes I shaved down the pin that connects the driveshaft with the transmission so it slides into the transmission but you can still screw it into the driveshaft. Mine has no play or vibration at all.

@@gamingwithbryan8613 Not at all. 6 speed manual

@@mrcleanvic very sexy

@@mrcleanvic what do you have done to it ? Would you recommend a 05 c6 for 21k would you daily it

@RC4X4 Thanks a lot I really appreciate that.

@@TheSlayer71782 Yes

@@Druidvasia Thanks a lot

Yes it's a very tight fit you just gotta do your best working them in. It's a little tricky.

The skid plate came from Shapeways.com the RII light came from a guy named Mauricio Bellido he makes scale RC parts.

Thanks a lot! It's a custom RII light I bought from a guy who makes scale RC parts off of Facebook

Shapeways.com

shapeways.com and type in Iron Hammer in the search bar and all the parts they make for it will pop up.

No everything is bolted to the chassis.

I built it from scratch.

Thank you I appreciate that!

Ebay and built and painted it myself.

The transmission mount is built into the chassis so basically it's part of the chassis. It's a lot heavier than a standard LMT.

There are two ways you can do it. One drill the hole out on the transmission to allow the LMT set screw to go in, or the one that worked best for me because I've tried both, shave the LMT set screw down enough that it will slide into the SCS transmission and wala you've got LMT driveshafts connected to SCS transmission. I hope this helps!

@@mrcleanvic Do you have a 5mm output shaft in a 6mm driveshaft then? How does that work doesn't it have loads of slack?

@danielwilliam1534 No slack at all. The pin keeps it from moving. Are you on Instagram? If you are I show how this process was done and the end results.

@@mrcleanvic I’ll have a look thanks!

I do build and sell these. If you are on IG check out my IG page rc_monstertrucks and DM me if you are interested in a custom build.

HESSE fabrication. Look him up on facebook.

Thanks a lot I really appreciate that

I modified the transmission to fit the LMT driveshafts on it.

Thanks a lot I appreciate that.

No problem glad I could help!

Thanks a lot I really appreciate that!

Good call. I was running the RC4WD SCS Drop transmission in this rig. It's a really good transmission highly recommended.

Thank you! They are both Redcat Groundpounder chassis. The Blue chassis has Clodbuster axles. The Grey one has SMT10 axles.

Thanks!

Almost a year ago. He still makes them but he makes them in small batches so you just have to catch him when he's making some and have the cash ready. When he sees youre serious he will get them out to you very fast.

Factory Losi LMT links on the bottom and CPE SMT10 upper 4 links.

@@mrcleanvic hey thanks I’m gonna give this a shot as I have almost lost hope in my smt10

Hesse aluminum gear boxes RC4WD Mudslingers Clod chassis and wheels CPE 4 links Savage shocks Reedy 3300kv motors and esc Jconcepts 79 Ford body

Thanks for the list

These particular tires no. These are larger.

@@mrcleanvic 😁 thank you so much im getting them for my original bullhead

It's true I bought these thinking it was the same size of the old school Proline brand Tractor tires ..these tires are like for an 1/8 scale.

No. Same body but different truck.

It all depends on the build and what parts are used. Ive had builds range from 600 bucks all the way to 3k. It all depends on the customer and their budget.

Thanks a lot I appreciate that. Those are just one inch lift blocks for a Clodbuster. Im not sure if they are made by RPM or not I think I just threw that sticker on there.

Newnan Georgia

Yea it was very exciting lol

Thanks a lot I really appreciate it!

Yea it took us a little while to put this together. Definitely a group effort. But mainly put on by RC Mods and Hetmanski hobbies.

Its all good. There will be another one

Thanks a lot I really appreciate that!

Yessir! Asphalt, mud, dirt, rocks we hit it all!🤘