Видео

Great video straight to the point <3

Will this dry faster than regular epoxy? Also is it transparent? Would you recommend to use this stuff as a coat to preserve a painted 3d print prop? Any downsides to using this?

thank you

Immensely helpful for an amateur who hasn’t the foggiest idea what he’s doing. Thanks bro.

Could you make a profile video of the cura 5.7 for CR10S Pro

failed to tell us this stuff hardens fast AF and get's super HOT!

How about Printables?

Could you share the measurement of the sitck that can with? I got my machine used and for some reason since I changed nozzle I can get it to print anything closer than about 1mm off the bed. I've used .2mm feeler guage to level the bed, the z access gantry is flat. I think the new nozzle may be every so slightly smaller despite being from creality and labelled as for the CR10s Pro V2, I think it's throwing off the bl touch sensor which is struggling to compensate. I've tried adding a -1mm z offset in Cura but it refuses to slice.

The number 4 in the aux leveling screen, that side won't get any tighter to get the bed higher

Very underrated

Wow this is the 14th comment

CAN YOU BEND YOUR BODY WHILE PUTTING ON ARMOR? :)

2 questions, 1: does the charging handle work? if not is there a way you could make it work? 2: Is the magazine removable, if not, cant you just at magnets?

I think the Iron Man back there is throwing off your auto focus.

Droid Division files are WAY better. And they were inexpensive, too.

Thanks, I had Ender 3 then an Ender 5 pro. I bought a second hand Cr10s pro V2 which was part destroyed in the post. ( I won't buy second hand again. I could not get it working, this video was perfect for me to sort out the bed leveling it's seems so much different to the Ender 5. Thank you.

Im making this now

Add foam in the cheaks and top of the head to make it fit better

You should scale down the helmet 👍

I created an app for recording time-lapses with no special setup required, and now it is officially the cheapest way to do it: ruclips.net/video/Daj0ZffMYds/видео.html

*on cura i have suport eraser is that what you talking about

I really wish this was a 0.4 nozzle size. It’s the most common. Still kind of just guessing.

I would suspect many print beds like mine have the center dipped whereas the 4 corners can be several mm higher. After leveling 4 corners, my center nozzle was still way too high.

This is not a good video. Far too much time spent watching the presenter and nowhere near enough on actually demonstrating what he is rattling on about.n It has left me very frustrated.

Hello Antons, do you say than the parameters are identique on Cr 10 smart and Cr 10 smart Pro ?

Are these still working or is there an updated video?

thanks man. nice and simple info. helped me go from clueless as to how those super- cool time lapse vids are mode to...fully understanding how i can do it, in only 7-8 mins. liked/sub'd :)

you should scale your helmet down a little

Weird but it seems the time lapse feature that used to be in the camera app in Windows 10 is gone in Windows 11. Can you recommend an app for that which is free to use for non-commercial?

I'm sorry, I don't usually write comments like this for videos, but this time I have to say that this video is a bit disappointing. First of all, it's almost impossible to learn anything from it. you talked a lot but you didn't explain or demonstrate anything, so for those who really want to do your set up, it's almost impossible. Second, it's really not a cheap method, and certainly not the cheapest as you mentioned. Maybe my expectations are too high, but to purchase a Raspberry Pi for 40-50 dollars, plus a webcam for about 80 dollars, so a total of about 120-130 dollars, it's really not a cheap solution! With this amount you can almost buy another new printer! I know this video is already 2 years old but I believe there were cheaper options even then.

1:58

Lmao when you said such clean prints You obviously don't own a prusa, bambu or K1 max

If you buy a bambu you'll have a lot less print issues. I cringed at all of the issues on the head.

good video ive been looking for upgrades you should try to fix the auto focus tho if you haven't all ready

i did my exploring on beds and amen yes love wham bam totally a bed to cook on was you able to print the upper body over the bed i have 2 ender 3d pros not sure the bed size your using i like E-Sun good stuff

I've got this exact same machine, but I can't get the nozzle closer to the build plate, even though ALL of my corner tension screws are totally loose. I even uses the black flat piece of plastic. I need help really bad.

I have the CR10S Pro and it dosent look like yours nor did it come with a block or metal spacing tool. Mine came with a thick plastic paper with leveling instuctions printed on it.

Exactly what I needed to get ready to set up my Kid’s Christmas gift.😊

Is the only difference between the V1 and V2 the Bltouch?

"dont go following advice from a 3 year old video" checks video date XD

Very confused man, very confusing video

I would recommend mainsail it's a pain to set up but worth it and using a btt 7 pad there great adds a touch screen with more options to ur printer

did not work for me and my nozzle and bed are now all scrached and it wont print

sweet thans

“Don’t watch a 3 year video on cura” checks date on video currently watching. Closes video….

Does it work with a v3, too?

How much filament would a print of this size use?

🤮🤢🤮🤢🤮🤢

How do you size up this helmet??

How do you size this helmet??