Видео

Thank you for telling the truth about that scammer

I have too many guitars with different radiuses. I'd have to buy every single one they make so I was out from the beginning.

Original video. ruclips.net/video/ueRcjBc8jgo/видео.html

***UPDATE VIDEO*** ruclips.net/video/-aBPTK_1PAE/видео.html

I wonder how many people this fret maestro has ripped off. I would say turn that sob into the Better Business Bureau 😮

I'm sorry to hear you went through this. You seem like a really nice guy. Thanks for the video. Hopefully my comment will help youtube get this out to people before it recommends his video. Fortunately something about him hit me the wrong way in the sales pitch video so I went looking and stumbled upon your video.

Yeah I bought the product, and have had dialogue with the seller. It’s clear from my interaction that the product not performing as described is going to be my fault and not the product working as advertised. Used it to level frets as described to correct taller upper frets causing bends coming out, did not correct that issue, I could probably figure out how to do it with adjusting the tool to different heights, but that’s not how the tool is advertised to work. I’d steer clear from the product, for the reasons mentioned in this video. The seller has a lot of excuses which means the product doesn’t work as described. You can figure out how to get it to work with some ingenuity, but it’s not straightforward as described and not as intended from its instructional video.

I'm glad i found your video. I was going to buy one of those fret maestro's until i saw his business practices. I dont care if its the greatest product in the guitar world, i wouldnt buy anything from anyone that treats their customers the way he does. I'm sorry you went through this, but thankyou for sharing!

Not only does this guy’s customer service warrant being called out, but I feel the need to reiterate, as others have stated, that this product is based on a flawed understanding of the physical principles of fretwork. When the neck is straight the fret tops are supposed to be level to each other, ie all occupying the same theoretical plane so that none are low or high. This is traditionally achieved using very flat sanding blocks and near-perfect straight edges as a reference. The problem with the maestro is that by its very design it uses the fingerboard as a guide for the file. Fingerboards are made of wood and all tend to vary by a few thousandths of an inch across the whole surface. If you dressed your frets with this device you would just be transferring the error of your fingerboard to the playing surface of your frets rather than making them true to a nearly perfect straight edge. In the end you’d need a skilled luthier to fix the inevitable low and high frets. You dodged a bullet!

😮not a very good way to start the giant introduction of a game changing product 😕 it was just introduced at the end of January 😮sounds like he needed everyone's money 💰 to make the product to actually sell the product 😂😂😂. 😮unless this thing is really a game changer this owner might be done before the tools big launch.😊not a good way to conduct a new tool launch and let everyone in the guitar community see 🙄 how you conduct business, like everyone i to have been waiting for someone to get this tool and demonstrate its performance on someones channel 👏

Damn Chris, sounds like a horror story. After seeing the Fret Maestro demonstrated by this guy, I had some reservations on it's effectiveness. Some of the claims didn't seem right. Then I found a couple of videos like yours. By the sounds, the guys breaking so many consumer laws it's not funny. Not to mention just the bad business practices. It seems like snake oil. Sometimes the old saying "If it's too good to be true, then it probably is" seems to ring true here. I hope in the end you managed to get your money back.

I went to a nationally known guitar building and repair school in 1978. Opened my own shop in 81. I do unbound fret jobs for $250 and have done hundreds. I live in a rural area and frankly don't know what they charge in the city. I charge lots more for bound boards because of the time and difficulty. I'm 75 now and semi retired mostly doing work for people I have known for ages. This doesn't make sense to me. $130.00 ? Save your money and support your local luthier. There are LOTS MORE of them than when I started and the schools provide even better training. Looks like an easy way to screw up your guitar to me. Just my old 2 cents I guess

Oh .. and I left out Painters tape from Lowes ..

As a luthier I will say, and most other luthiers will say , that this product cannot be better the overall leveling and will never replace a sanding beam and crowning file ( or even a simple file) I suggest that you go to RUclips and watch the very many luthiers out tjere showing how to level frets ... They're going to vary from one to another slightly but for the most part they all work .. Once you learn and see how easy it is , you wont be scared to do it yourself.. When I first jumped into luthier work I started out by fixing a broken neck on my mandolin... then doing a neck reset on my Martin guitar... iI was scared... but the nobody around my area knew how to do it .. From there it got fun ... Hint , you can get away with those cheap Chinese leveling bars and fretting tools ... you will definitely upgrade later ... Whats the worst you can do ? Screw up your frets ? Okay . It will cost you a $150 fret job ... but I am betting you'll figure it out ..all you need is a notched straight edge ($10) , a cheap fret leveling kit that comes with leveling beam fret rockers , crowning files($20) some sandpaper in 400 600 800 grit from O'Reillys and your good to go .... Oh and of course a nit driver or allen wrench for the truss rod.. Try it . Watch RUclips videos. You'll figure it out .. You can but the good quality stuff later after you are sure you want to continue.. which I am sure you will do both ..

Sorry you had this issue man, sure glad I had the chance to learn from your experience and save me time money and grief. ✌

You did the right thing. This product won’t be around very long is my prediction especially with poor customer service.

Negative comments should have to remain,had comments removed,if u tube wants interaction with the public opinion then why allow this, disturbing , suppression of speech is dangerous

Reverb returns suck since changing ownership, hideout for scammers good luck at refunds

Check this video out guys. It's from @HighlineGuitars. ruclips.net/video/e3HGcTvxpFU/видео.html After watching the video, scroll down to the comments and look for @Sixstringers comment. Here, I'll make it easy for you... @SixStringers 19 hours ago Yeah, it's called riding on coat tails in a malicious manner. Selling a lot of T-shirts are you. @HighlineGuitars

The thing is, the Fret Maestro doesn't work. Check out the videos on it.

Thank you for doing a real service for the guitar community by highlighting this, we can all draw our own conclusions. Sorry you are going through this frustration.

watch out. the asshole that owns the company is going to copywrite strike you. He doesnt want anybody to know how bad his product is

What a nightmare!!!!!!!!!!!! Thank you for sharing!!

Thank you!

Just wanted to say THANK YOU FOR SAVING MY ASS $130. I saw his video then IMMEDIATELY started to see what the reviews were. Your video was the FIRST one I saw. So again THANK YOU I WILL NOT BE DOING BUSINESS WITH “THE FRET JERKOFF”. Sorry you had to go through this mess brother.

One 'Dislike'! xD

Lots of talkin, show me the Money!

Thanks for taking the time to make this video and share your experience.

I'm in the market a fret leveling kit. Thanks for the warning. I won't be buying from him. Ill go with the Fret Kisser and Music Nomad's Safe Zone Fret Crown file.

Well this must really have affected you if you had to post a video about it

Great video, your point was well put across. No-one is a bad person for requesting to cancel an order and having a refund. I agree with you and would like to see you get a full refund, an apology and an update on reverbs site stating the waiting time for shipment. I'm not sure what this product does but if you have high frets or high fret points, try gently tapping them in first as they might just not be seated correctly.

i sell on reverb the seller does not get payed untill the idem is shiped with tracking number it takes a few days after shipping to get your money get a hold of reverb they should have your money this is b.s. you should get a refund not to put anybody or any thing down there are better ways of fixing your frets great vid by the way to bad you had to make it

This thing is like a car crash I can't look away from, and the creator of this product has made himself look really bad. This will be talked about for years in guitar circles.

The maker of this product is also mad because another RUclipsr posted a video, explaining why this product doesn't work like they claim. It doesn't, or cant, level frets. Since it works off the fret board and not the surrounding frets, how can it possibly level frets? I've never used it. And I've never made a video of it on my channel, but after watching the video explaining why it doesn't do what they say it does, I'll never get one. And from seeing your video, this person really needs to work on his customer relations.

Chris, thank you so much for posting this video and sharing your horrible experience with this company. Like you I'm just a guitar player. I am now disabled so I have more time on my hands and have been slowly learning to work on my own guitars. Because I'm disabled money has to be allocated wisely and I was about to buy 2 different Fret Maestros thinking they would save me money on the long run. I have done some research now and after hearing your story and others like yours I will not be purchasing them. Even if they were the greatest product on the planet I would not do business with someone who treats people like this. God bless you brother and thanks for saving me from making a huge mistake.

The thing is more of a crowning file than it is any kind of fret leveling tool like the seller thinks it is.

The Fret Maestro did interest me, although the demo videos leave a LOT to be desired. Anyhow, I emailed SixString after watching this video - received an immediate response and no mention of delayed delivery, etc. Too many red flags. It may be a great tool, but what will I do when it breaks and I need replacement parts?? I doubt this company will survive long under the current direction.

I was also highly interested in this product until seeing your experience and others. Thank you for sharing your experience on this. And I agree that it really doesn't matter how well a product works if this is the kind of service being provided. The product clearly had not shipped so issuing a refund should have been an automatic. No need for dialogue, excuses, etc. He had one opportunity to make a first impression and he blew it with you and also with another potential customer (me). Take care! And thanks again for sharing.

My opinion on your issue: First off you're not an instrument repairman.Second if you wanted to do your own fret replacement or fret leveling or fret dressing you should have purchases approx. $150 worth of Dan Erlewine's DVD's to learn how to DIY....then decide what you need to purchase for tools if interested in taking on the task of repairing your own instruments. I have talked to Steven....owner of Fret Maestro and when his products came out in 2024 he was swamped with orders.When I saw his product I thought it made sense to work the frets in that fashion other than the traditional sanding beam(which removes fret height way too much from what I have seen and experienced).His product to me would be like a manual PLEK system. So if you do receive your product from Fret Maestro to level your frets you should get the 150 grit file to start then move onto the 300 grit file.....then the 240 grit crown narrowing file.After that you'll have to dress the fret ends with a fret end file....then proceed with fret sanding 400 to 600 grit.Then I polish sand frets from 1500 grit to 12,000 grit. Cheers...!

Call your credit card company and they will take the charge off your card.

Kudos to you for being so calm and collected in your responses despite this fret maestro guy being an absolute rude, slimy and a sorry excuse for a human. Hope you get your refund and the money used to get your guitar fretwork done.

Would it be possible to put a stop payment order with your financier? in such case, especially seeing it wasn't shipped yet?

It's a terrible product. Nobody should buy it for any reason ever.

I agree with everything, with the exception of bullying. You are an adult. Kids are bullied. You have recourse, kids don't. Kids are bullied, and some take their lives because of it. Adults using the term waters it down and takes away from a serious issue.

Regardless of product, the customer is always right period! I looked at this product when it popped into my feed but had too many doubts on its ability and cost although I may pick up the nomad safe file if it’s ever back in stock on account of my eyes getter bad and I can’t see my sharpie mark when crowning lol. Loved your vid brother too bad you had such a shit experience…

That guy is still posting video on how his device works. If it does not, why is he continuing to snake oil us on this device?

Honestly, it just sounds like its a scam.

That is too bad I really thought about buying this product. I guess that is out the window now. Thank you for your video Chris!!! So, sorry you had to experience this but now all of us will really think twice or more before we buy his product. For me I do not have time for games and I will not buy it.

Here's the reuploaded video from @NautilusGuitars. It perfectly and accurately dives deep into the truth of what is FretMaestro. This one will not be taken down! ruclips.net/video/y7vIDhZHZkk/видео.html