Видео

Im confused.

So did you tape it up the cof strip

I opened my ecco sound bar to remove a stuck aux cable piece..now it's turning on,what could be the problem?

How many screws does this thing have? Joh😮

Impressive. I wonder if a Levoit air filter - 300S, is similar.

My tv is getting no power I think. That little green light was not turning on at all. You said to replace the power board? What website can I buy that part from?

This worked, thank you so much!!!

what is the cost of it

Just a comment of how i found out what i did wrong and how i solved the problem of a pink Screen: (without opening theTV) The TV Samsung GU65TU7079U Was the one that had a pink screen. I watched the this yt video and i realized something. The lights could also change color, when the TV does not get enough energy. I plugged 2 power strips together and than the charger of the TV. Which means i’ve cut the „energy“ in half and the TV didn’t get the energy he needs. Because the screen was 65“ it needs some, and that was not enough. When i’ve shut down the TV and plugged it in in an other socket the TV was fine again. I hope that was helpful for someone. Good success.

Where can I buy those capacitors from

Thank you so much for the video. We fixed our TV ourselves by following what you did. So happy! It works now!

Thanks for this guide! It fixed my TV 😊

Would a new ribbon solve the problem?

Where can i get the charging port for this model? Link?

The red led isn’t displaying and when checked if led lights turned on they dont turn on when I plug in the tv what would say is the problem?

Wow! I got hope watching this. Thanks

Newsons Electronics...Do you have difficulty answering the questions?.... what is your problem with clarifying the questions?

Show us the hard way 😂

would this work with my hp laptop 15-db0xxx?

I habe das sx-px224 mit dem gleichen Problem nur das es keine Sicherung gibt. Die 4,8 Volt liegen auf dem IC1 an. Kein Display und kein Ton aus dem Gerät

I'm so glad I found this video, my TV is working again, after some faffing about to get the right pins. Mine lasted 3 years and 1 month before the fault occurred.

looks funny

Happy to see our spider kit plays so cool.

Holy crap, it worked! Thanks for saving me $600

Does the silver filter go between the whites

i did the same thing no photo but tv turns on now?

That's a cool lego build 😉

Oh my god, i can't believe this worked. Wish I found this sooner! TV kept flickering on an off, so I actually bought all the replacement parts, and after testing each one, it still happened, so I looked, found this video and boom, working TV again. I have a samsung qn70q6dtaf, so there were two of those sets of strips so I had to test both sets, luckily it wasn't one of the inner ones as they seem daisy chained from inner to outer on each side. Would you be able to tell me the exact cause as to why this is happening, and if I wanted to replace the part causeing it, would it just be the single PCB for the LED?

Did it pair with a motor?

I have the same i-Pilot in video. When inserting batteries it turns on and may function briefly controlling the motor then report “RF error” and shuts down. I restart it again same issue then it locks up in the start up screen and won’t shut off with out removing batteries. I dissembled it and I cannot see any corrosion. If you still repair these I could send it to you for a look-see, maybe repair, maybe for parts.

I have the same i-Pilot in video. When inserting batteries it turns on and may function briefly controlling the motor then report “RF error” and shuts down. I restart it again same issue then it locks up in the start up screen and won’t shut off with out removing batteries. I dissembled it and I cannot see any corrosion. If you still repair these I could send it to you for a look-see, maybe repair, maybe for parts.

Is it possible to change it to type c?

Nice one. Not often I don't take something apart to repair it. But was not to interested in solving this issue until your video. Thanks man

I bought a new led strip, but I have a problem with the power supply. On the instrument it shows 255 volts on the Led output. The diodes get very hot in just a few seconds. I don't believe that they would last until I lower the voltage in the menu.It is the same TV model Have you had such a problem?

dude, you only had one job, and to show how to open the device!

You hand blocks what you are doing.

You said, 'This is a repair of a SONY TV'...? Thot it was PHILLIPS. 😂

What is that long, little white wire on the right hand side of the phone (right side in the video) at the 52 second mark in the video? That little white wire is disconnected from where it should be when I opened up my phone. Do you know if that has anything to do with charging the phone? My phone will no longer charge. Wonder if that little white wire being disconnected is the culprit.

My brother in christ this is not easy

Excellent info! Thanks much. Mine is All Region modified....for $350. Definitely want to fix it.

Hallelujah 🙌

ITS an ACER not an Asus!!! 🙄

I’ve got the exact same model in the 50” version that just started when powered on, screen looks fine then the bottom menu comes on, then the screen turns black then it powers off by itself. If you turn the tv back on it will just repeat that cycle of menu, black screen, power off.

He calls this easy....Really?

Mine done this but it won’t let me restart my Xbox or reset my Xbox bc there was a problem with the update how do i fix it

Same thing happens to my tv and my gfs tv same thing and there both the same Samsung tvs Oleg

hi, im trying to fix one, not the same model but has the same problem, it even makes the same noise when it turns off, did you figure it out?

Hello sir , could you please suggest I have Bose come mate 15 and in soundbar there is 4 speakers but in my case 1 is stopped working it is repairable?

When I try and go in to safe mode it just turns off every time I press the power button, no matter if I'm pressing it the same time as the other buttons whatever, just goes off

I have been looking everywhere for a repair like this with a diagram! I have a question if you don’t mind! I took a look at the right side and the wire that should be connected to pin 1 is detached. Should I be able to simply solder the wire back on the pin to regain function of my power button? (Assuming no other issues) thank you!!