Видео

Bodykit*

@@elixer_t6t638 Hey, The front bumper is a GTR style front bumper off eBay. I believe the side skirts are top secret ones. The rear spats are GTR replicas The over fenders I think we’re 20mm or 30mm wide these were of eBay also. Front wings I think we’re 15mm wide ones again off eBay. Hope this helps 👍🏻

@@Hypantaleo Hey, it was from eBay I believe. Just had a quick look on there it looks a lot like the EPRacing one. So it might have been from them. But it’s basically a R33 GTR style front bumper. That’s what I searched in eBay and it came up with the EPRacing one. I also think Knight Racer also do a Version. Hope this helps 😁

@@ashlb8223thank you so much. funny you say that i’m literally on epracing’s website rn. and i have the knight racer one in my cart… however are these places legit? i see the epracing one for sale for $300 on their website and on their ebay it’s almost $2,000… and the knight racer just has no reviews whatsoever. idk if they’re legit! thanks!!!

@@ndorfn6579 It’s such a rubbish job mate. I need to do another video. I’ve got my gauge working. But I had to source a second hand sender unit. Swapped it out and it worked straight away. But between that black ring that you have to knock loose. Then trying to get the sender off all whilst being in an awkward position leaning into the boot of your car it’s got to be one of the worst jobs.🤣

​@@ashlb8223yeah man it's a cow of a job 😫 so annoyed I have to do it again. At least you got it sorted with a replacement, typical tho. I ended up making a tool to get the cap off with a cple of brackets I had lying around (kinda like this ____|___| ) actually worked 😅. I'll keep an eye out for you vid. Take it ezy and good luck. From 🇦🇺

@@ndorfn6579 I might try to make a tool as well as I’m sure it won’t be the last time I’ll need to go and fix somthing 🤣 Thanks man you take it easy as well 👍🏻

@@TA_Motors 😁

@@TA_Motors Thanks man 😁 I do love the sound.

I know mate 😔 hopefully will find the time to swap out the turbo.

Thanks man, very much appreciated. Nissan Pulsar is GtiR is a very nice car as well. Rare as well you don’t seem them often.

They are a great car 😁 I always wanted to own a skyline. Hopefully I can get it fixed again and back on the road 👍🏻

@@ashlb8223 yeah

@@ashlb8223 but I prefer. One in midnight purple

@@KaneTurney The midnight purple is a great colour 👌🏻

@@ashlb8223 thx

Thanks 😊 really appreciate it.

From Memory I had to have the Passenger sill repaired with replacement sill panel and the rear part where the holes for the original skirts had to be fabricated so I had no holes. Also had to do a riv nut in the front wing and use one of thr riv nuts for the Overfenders to get a secure fit. The spats where a difficult fit tried to use the existing holes. But then the fit wasn’t great in other places. Still no super happy with the fit but it was the best I could do. Good question I’m pretty sure it was a 25 DET from new. But I’m currently having a nightmare with my speedo not working. Brought a new speed sensor it reads if you spin the sensor but once it’s in the box nothing. Sorry for the long reply back.

love all the info! Thanks for sharing.@@ashlb8223

@@EyeCanShootFL No problem at all, I’m always happy to help if I can.

Thanks, very much appreciated 👍🏻

Thanks mate, much appreciated 😁

Cheers mate, all the way from Japan 😁

Hey, I not going to lie it was a real struggle to get mine free. Also trying not to get the urge to just yank on it as hard as possible. The sender comes off the bracket to the left. I trying grabbing towards the bottom then the top trying to work it off the bracket. I do have a Instagram ashlb33, feel free to drop me a message and I’ll try to send over images of the sender. Might be able to get zoomed in image of the clip so you can sort of visualise how it will come undone. I have a couple of mates with Skylines who have had battles with getting the sender unit off. I do have to take mine off again sometime this year as I’ve sourced the fault to the unit. My wiring to the gauge works. I’m dreading it!

@@ashlb8223 thanks for getting back to me. I read another comment saying use a screwdriver to prize the clip on the unit so I may try that. I've tried wriggling it, twisting it, pulling from the top, middle and bottom. It's frustrating to say the least. Lol

@@josephspeed3006 That might be worth a try like you say if you can open that clip abit it might come free. Like you say, I left it over night and came back to it the next day as it was driving me mad and killing my legs leaning into the boot. Keeping my fingers crossed for you 🤞🏻 like I say I’ve taken some close up pictures not the best. But if you want them can ping the over Instagram. 👍🏻

Thanks mate, the amount of cutting down on the video due to fiddly bits lol got there in the end 😁

Thanks for the message 🙏🏻 I have brought a resistor. Just need to find the time to get it done. Thanks again for the message 😊

@@ashlb8223 fair call do u have an Instagram page ?

@@ashlb8223 when you install the resistor could you please make a small video showing where you installed it? Thanks mate

@@Nigruto7 Hey mate, will make sure to make a little video when I do it 👍🏻

Does it look like Japan?! 😂😂 it’s the uk mate

Yes it’s in Tokyo.

Hey it’s the Uk.

Wish it was in Tokyo.

Thanks 😊

That’s a good question. I’m not sure I do plan on getting to the bottom of fixing it. But if the float is the thing that’s broken it may be an option 👍🏻

Congrats have fun with it you got any plans or modification you want to do ?

@@ashlb8223 I need to diagnose a misfire first off. But yea I’d like to swap an rb25 in it and wrap it ford performance blue lol. Long ways away from that however.

@@Ballsack44 Sounds good, I know a couple of people with then RB25 you can get moisture/water collect by the Coilpacks and spark plugs which caused misfiring they gave it a clean and blast with a airline which helped them. Maybe somthing to check and it’s free to do 👍🏻

@@ashlb8223 my car has an rb20e I’ll check it out tho and see what I fibd

regardless r33s are the shit, not as expensive as r34s lmao

It’s not a daily my dude. I’m guessing your not about that low life 👍🏻

You are also right Uk roads and how low it is is a disaster waiting to happen 🤣

Keeping my fingers crossed for you 🤞🏻will have to let us know if it works for you. 🙏🏻👍🏻

R32’s are cool but have a soft spot for 33s

Hey mate, I brought them as a job lot off eBay side skirts, rear bumper and spats. I was told the are GTR style rear spats.

@@ashlb8223 cheers man, appreciate it

@@justsomeguy9713 No worries man 👍🏻

Thanks man, I hope all goes well with getting yours on the road 👍🏻

No problem at all, hope it helps sort the fuel level. Some of the guys that have commented have also put some good information also. 😁👍🏻

Cheers mate, cheap a cheerful paint job, it’s holding up as well 😂 Just subbed mate, like you say it’s good to see another r33 channel 👍🏻

Ahh sorry mate, he has actually sold them. To fund the restoration. Need to do an update video on his 33 it’s come along way.

Hey mate, I’ve really enjoyed mine and since putting them on the car feels great I can’t complain. Also working for Driftworks I know a lot of the guys run HSD’s on there personal cars. I’ve gone down the Monopro route myself or you have to DT version which is more the road going version. The guys and gals on the sales team are great and will be able to help with anything if you needed anything. Hope that helps mate, drop us a message on Instagram if you need anything else Ashlb33 👍🏻

Thanks man, really means a lot 🙏🏻

Yea sure mate, they were a eBay special can get them clear or smoked. I think they are actually down as motor bike indicators. But works just as well 👍🏻

Hey mate, I will have a look should have it somewhere. My insta is ashlb33 if you have Instagram drop us a message if I find it will ping you a photo. 👍🏻

Thanks for the comment mate, I haven’t had chance to look into it further since the video I did. I will defiantly have a look into this. Also thankyou for the info, hopefully this video and all the comments will help everyone out 👍🏻 If you have insta mine is ashlb33 if you have any pictures of the repair that would be great 🙏🏻

@trevorotjen8, Trevor, for the past 24 hours I've been trying to figure out how to re-build both float brushes, and I'm still trying to figure out the best material to use for gasoline/petrol application, hoping I can make them better & stronger/sturdier than what comes from factory. For that reason I would like to know if by any chance you have a drawing, pic, sketch or video that you could share with us, and also I would like to know what do you mean when you refer to 3,000 brass plate. THANK YOU!!!

@@jesusmrodriguez1123

No pics or video. Find 3,000 brass or copper and copy the layout of the original float. The brushes are quite forgiving if you make the conection too tight. I actually cut my brushes on an angle, starting from 8mm at the float to 5mm at the end of the brush.

No pics or video. Find 3,000 brass or copper and copy the layout of the original float. The brushes are quite forgiving if you make the conection too tight. I actually cut my brushes on an angle, starting from 8mm at the float to 5mm at the end of the brush.

It’s not for everybody, could do Raw version 👍🏻

Thanks man 🤙🏼

Definitely mate 👍🏻

Thanks the kind words bro, you don’t know how much that means 🙏🏻 Huge thankyou for the sub 🤙🏼

100% can’t beat it 😁

Thanks man, much appreciated. Took a lot of work to get done 🤙🏼

Cheers guys 👍🏻

Thank you much appreciated 🙏🏻😁