Видео

Milwaukee blades work the best with this saw I’ve noticed 😊 Good video

What is meant by a good electrical cord? I have a 13 amps/125v cord. Is that sufficient?

Thanks for the video on replacing the fins or the sash is what it's called. Looks like a simple task to replace mine😊

Watched this today and fixed my 2nd bathroom’s toilet which wasn’t filling the bowl all the way up. Thank you for sharing this!

My yardmax has been flawless for 3yrs, But my neighbor stole it. It was used for frequent light duty.

I have one I love it starts on second pull every time I’d buy another one for sure 👍👍💯

Damn u talk so much just change the belt like the title says FFS

I will never buy a Kingston brand again! They don’t answer the phone at all no matter the department. I bought the replacement cartridge and they don’t mention an adapter needed and changed the set up 2 yrs old and corroded . I’m 61 disabled and can’t breathe well. Had to use old parts after soaking and scraping 3 days later done and in pain. Horrible company

It worked! Thanks!

Thanks so very much, I didn’t even had to replace it just flush up the buildup dark water until it was running clear with the cup on top ,and it was done. Five stars. The tank works fine, again thanks.

Update! After one week, there has been no evidence of mice activity in or around the van, the traps have not been touched. I have ordered a new filter and will reinspect the filter/fan housing for activity during replacement.

The mower was and is working fine, but it has begun to smell like gas. I took it to the shop, no fuel leak, and they switched out the air filter, but it still smells. Have you had this problem?

Kept me from standing in the pouring rain forever...just for 10 minutes while cursing til I thought to look on RUclips 😂 Thank you!

Is the connection of the refill tube on the other end semi-permanent, perhaps glued? Do you have to replace the whole valve if it comes loose?

What if it’s popping off at the other end? That’s what’s happening to ours 🫤

Wondering if you might have an idea for getting the profile if you don’t have extra molding. I just had Marvin elevate windows installed and I don’t have a level molding for installing top down bottom up cellular shades. I would love to try and make the mold like you did to level it.

Thanks Sir....I have the exact same unit and knew it needed to be cleaned. Your Video was just what I was looking to find. Thanks!

Excellent review. I’m using a borrowed Warrior saw to breakdown a fallen tree branch. Much more comfortable than a chainsaw and just feels safer. As a woman with small hands, it’s perfect for my needs with future landscaping chores. I have had the shaking when the saw heats up after using it continuously for several minutes, but I just sit it down for a minute or so, then it operates without the shaking, but I also check that the blade isn’t loose.

Why’d they ask for a picture of the wheel if it’s not covered under warranty and they don’t manufacture them?

Thanks for doing this video ..I just bought one today and it was $ 44 .00, Looks like it took care of that log you had there with no problem.. I've never used a chainsaw before only a hacksaw so as a girl I'm a little nervous, however what I need to cut up is not as thick as what you cut ..so I feel better plus your thorough reviews! I'm ready!😂

I have the same Warrior saw and have only used it a few times. However, yesterday the saw itself began shaking (shimmying) so badly that the entire body of the saw did the same plus my hands and arms, shoulders, and skull shook along with it. I felt like my brain was being shaken within my skull. Afterword, I saw that the mechanism that holds the blade and the blade itself was not tight. So do I just need to tighten the blade holder somehow? Appreciate your thoughts.

This has been an issue for over a year. I am so happy that this video was posted. Finally something that works. Thank you so much.

Screw the green commies

My Pittsburgh reciprocating saw had a faulty trigger due to low-quality plastic parts. It got stuck and stays on. Dangerous!!! I had to take it apart and sand down the edges to fix it. Some of these tools are more like disposable items, good for only one project. For certain tools, I prefer to invest in a higher-quality option that will last longer with better performance.

I have one of this and it's held up real nicely the trigger does stick sometimes so you have to be careful 😅

Thank you sir

I used some Nashua Stretch n Seal tape as a wrap to seal and reinforce this joint. It is easy to use and available at Home Depot, Lowe's and such. Perfect, easy fix using just a 4" or 5" piece. Should last the life of the flush valve or fill tube itself, whichever comes first. Highly recommended!

perfect video only took 15 minutes to replace the old one was gooked up maybe could have just cleaned it but I replaced it no issues

Lot of talking no showing. You are jackass

I have a 2015 V-Star 950, and I bought this exact same windshield based on your recommendation. I am extremely grateful for your video, you saved me tons of time putting it on. Your biggest time saver for me was showing where the brackets went, especially on the forks. My installation went about the same as yours, including using longer screws on the fork brackets. One interesting problem I had was that the machining on one of the fork brackets was such that the barrel didn't line up with the hole. I had to use a Dremel to widen the area of the flat spot (hope that makes sense); the other was perfect. I also used Loctite (blue) on every screw, barrel and set-screw, so it hopefully doesn't come loose. Overall pretty happy with it! My sissy bar/luggage rack is next (same as yours, of course!). Thanks again!

Yes, agree with others, your video is excellent to replace seal. Use a flat head to press one clip, then next clip to release black cover. They seem to go back like a see saw. Turning the seal cap wasn't hard. Thanks for being easy to follow, gives me confidence!👍

Worked great. I used a pocket knife

Nice review video. Are you up for a collaboration talking about the maintenance of the lawn mower by the way? I mean you get the knowledge of lawn mower maintenance and we Hipa gets the affordable and good quality aftermarket parts. Maybe we can work together to help more DIY repairers in the community.

Thank you sir! $3.23 part, less than 10 minutes to fix start to finish.

Thanks for your help! We lost my dad a year ago and learning to repair the house has been a learning care so thanks so much!

You do not pull the top apart, you hold the bottom assembly and THEN turn the top counter-clockwise to take apart. DUH

That is the best thing to do. Hold onto and repair them as long as you can. Some newer appliances are just too costly for some to fix. That is assuming they can get the parts first of all.

best way to fix a running toilet is to close the bathroom door! Then it can’t go far !!!!!!! lol !!!!!

Bruh I just bought my first house and this really helped thank you!

Thank you so much!! I just couldn’t figure that out!!

That sucks lol mine just came completely assembled. All I had to do was screw two wing nuts to half handles together.

Worked for me! Thanks so much!

I’m 71, have been cutting grass since I was 10 and have never had such mower issues like I’ve had with Yardmax. Fate two years, my YG1550 needed new wheels and the lower handle broke. I’m a retired pipe fitter so I bent a new lower handle out of better steel tubing. This thing is getting close to being kicked out the door. Give me a good old Murray any day.

Same thing happened to my Yardmax YG1550. Where did you get the lower handle replacement part?

Like video

If i were you, I would just consider buying a new mower. I wouldn’t wanna deal with any more broken parts.

Ran into the same issue wheel broke on me

Yesterday my toilet flushed and then was extremely slow filling. I flushed any debris from inside (there was some), turned water back on and it flushed/filled fine. But then it wouldn't fill again unless I turned water off and back on. So I initially ordered a whole new fill valve from amazon along with more flappers because I noticed the current one was looking very rough. Then after further research, I saw advice to just replace the seal for the fill valve. So I made another amazon order for 2 seals (one for future use). I got the 1st order today, with the full valve kit and decided to use the seal from it instead of waiting for the 2nd order of 2 seals (because I'm tired of not flushing or having to turn the water off/on). The first few flushes filled at a good speed, but after done there was a squealing noise that hadn't happened before. Came back to youtube and saw the same advice of changing the seal to stop that issue. I pressed down on the top of the fill valve and now it seems to be quiet, at least the last few times I've flushed. When I get the 2nd order of seals, I'll open a package and put one in the new fill valve and not have to worry about remembering if the whole thing needs to be replaced. It is nice being self-sufficient, especially if you don't have a man around to be handy.

Worked perfectly! My Moen shower head was horrible, removed the ring inside and it’s now normal pressure! Thank you for the helpful video

Are you going to be starting from the deck, or using the rope guide, which keeps it in place further up the handle?