Видео

@@3DWithUs it's definitely compact

@@AceOfSpadezCC great idea

@@3DPUK-TECH-CHANNEL Was necesary. The first time I started printing, I went in to check it and the glass was teetering on the edge of falling. I went from the top front, to the back and to the front of the under side on all tabs, incase I want to put it in at an angle for controlled venting it keeps the glass from vibrating and wanting to shatter.

@rv7builder397 tr.ee/D6vTc5FOUo Try this but there are some new files for this now as this is an old file now

@@3DPUK-TECH-CHANNEL Many thanks! I just downloaded the '20241214T152012Z-001' version; is that the latest?

Well, I'm stuck on the 1st file move; I don't see a '.def.json' file at all, after extracting all the nested zip files. Did the process change for the new files?

@rv7builder397 I'll be honest it's quite an old printer now so some files may have drop off the system.

@oscarnaranjo844 so it's a hard one to call both printers have excellent features for the price,.. so far the k1se is performing really well. With the updated extruder and unicorn nozzle

Thats good to hear, i have the newer version of k1max so came with the upgraded extruder, but my k1 has improved massively.

it evaporates like the rain does when the sun comes out

@@3DWithUs it's a great laser and affordable too

@alancruickshank9286 that's good to know I may monitor it's performance 👌 and if it's an issue I'll disconnect the old, thanks for this heads up. It lacked instructions to

@alancruickshank9286 I've added a disclaimer on the thumbnail and title, thanks for the heads up

@@3DPUK-TECH-CHANNEL No problem

@deaconfamily2441 hi many thanks for watching, I didn't no i believe it come from Europe and no import charges

@@Boycacc I would slow this down for printing no more than 60mm/s

@TheRealSamPrentice very true 👍 hahahahah

@TripodsGarage thanks for your comment, it's nice laser but I agree shame it wasn't a galvo, but for the price it's a pretty decent little laser. Specially for crafting fayres

@grzegorzdulski8768 yeah the benchy print was awful I used damp filament on that lol. Not ideal, I rerun the benchy of camera and it was pretty awesome, I used the Hyper pla, tbe rainbow one I used wasn't great for high speed prints 😄

@@3DPUK-TECH-CHANNEL Could you show this benchy and do another test with lower speed for better quality? I'm still afraid the quality won't be as good as K1C or Bambulab A1.

@grzegorzdulski8768 I'll do that this weekend

@kara898 thanks for watching so noise is slightly higher, than the enclosed version given the lack of sides, lid and door. But still negligible

@@jrndichmann8835 I don't think so

@jerzyfabianski3611 I'm currently reviewing the genmitsu kiosk 10w laser so after this i can give my views. Having used the sculpfun further it's actually alot better now

Ok. Thanks

@alexalcantara3960 no changes needed.

@RIAG-g6z for some reason youtube shrunk the video apologies

@punkreeperful www.printables.com/model/945379-creality-k1-k1c-honeycomb-side-panels-vents. This is a print yourself sides however won't be Enclosed

I used longer screws and wedged in cardboard lol.

@TheNewBloodDan that's a rudimentary way haha. Not sure on the cardboard lol

​@3DPUK-TECH-CHANNEL put these into blender and fill in the honeycomb, problem solved

@@O-RoD awesome stuff

@@3DWithUs awesome filament

@@TheRealSamPrentice oh matreon

@dmytrokretov2500 can I confirm in the next few days when I get back to the studio I've just come our surgery

@@3DPUK-TECH-CHANNEL of course, I will wait for an answer.

​@dmytrokretov2500 so just checked with a 3kg spool and this didn't work unfortunately 😕.

@@3DPUK-TECH-CHANNEL Thank you. There is a big problem with available dryers for 3 kg spools

@dmytrokretov2500 so check out mu EIBOS Polyphemus review that will surprise you

Are you sure ??? Compatibility with K1C/K1/K1 MAX:Designed for compatibility with Creativity's K1C, K1, and K1 MAX 3D printers for seamless integration.

prolly need to trim the bowden tube down a little.

@impact0r so in terms or noise while in use it was well below a nominal level and against a printer cannot be heard at all.

@@3DPUK-TECH-CHANNEL Thanks. What do you mean by "nominal level"? Can you sleep next to it? Can you hear it in a quiet room? If so, can you hear it in the next room with open door?

@impact0r sorry for being a little vague currently in hospital ward following major surgery. Erm so I guess like a low droning sound. Much like a small fan on low setting its hard to say. Maybe no more than whispers decibels. Sorry if the video didn't cover this properly

@@3DPUK-TECH-CHANNEL Great info, thanks!

I believe it's in the settings view

Hey 👋 so mine came with 2 screws and then i connected to the perspex panel. That's odd urs didn't supply 😮. Thanks for watching,

@@3DPUK-TECH-CHANNEL Do you know what size they were? Did they just Self Tap into the 2 holes on the cover?

@3DRundown I'll goto the studio tomorrow and take a pic and send over, I'll send to your Facebook messenger 😉

@@gulcanrose3750 to be honest ready to drink temp

@Gadgetonomy thanks for your input 👍. So the initial flush is to clean the internal flow pipe (information from supplier) to ensure residue from previous usage. The grinder i agree with as taking a further look since video it's actually not the grinder (so thanks for the update) the catch tray underneath is to be emptied often due to liquid ingress hence the red float indicator. The bean dial at the back is actually for bean flavour strength to allow intensity (supplier information) and lastly I call them coffee pods as if you check the inner catch tray they give the impression of a coffee pod. (My terminaolgy) and agree on the espresso wording. Thanks again for your added info. And thanks for watching in detial

I will measure mine and get back, but i highly suggest just swapping nozzle types to the unicorn nozzle. It is much easier to deal with and they arent that much. I got mine for 10 bucks for hardened steel nozzle which i believe is the standard one. They are a direct swap. Swapped mine in, then i went and upgraded the heat sink, the hotend and now to this extruder. My printer runs flawless with all materials. Tpu is still a bit finicky depending on brand. Mine is the old K1 fyi. No other upgrades.

20mm bowden tube length.

@@highlandsoutdoors2041 k1 max for larger print volumes k1c in its own right has benefits but not size .

@@3DPUK-TECH-CHANNEL Thanks for the reply i asked a ton of channels with no reply . Would you put your own money down on a k1max .. or would you go with the Bambu X1C AMS combo ,, I no there will be a color system soon for the k1 so I'm not all that concerned with the color ,, i like the bigger build volume the most but is it really worth the money ,, i am stuck between the k1max with a ferret pro 3d cam combo or the X1c with the AMS combo ,, i see you have a bambu printer too

@highlandsoutdoors2041 I would definitely pay myself yes and the Halloween deals are up and savings are good . Thanks for watching

@@3DPUK-TECH-CHANNEL Yea i seen that ,, So i guess my question is , if you were in my shoes what would u go with ,, C or B

@highlandsoutdoors2041 I have both and both have advantages cost would draw me towarcs creality

Always advisable yes

So far so go0d and improved the flow and quality

@@skywiseaviationuk great lasers

I WAS RIGHT, it was a wire problem!!! My wires would pinch as the bed was moving, cutting power to the bed, which was causing the error. If you are having the same problem either with the nozzle or the bed I insist on taking the clips off that hold the wire from interfering with print, or prevent your wires from bending/kinking. Hope this helps others.