Видео

Hello. Here in Argentina I was a cinematographic operator for more than 25 years, I worked with 35 and 70mm. The last year I worked was in 2015, and in the cinema where I was we had 2 Victoria 5 projectors, in one room with a dish and in another with a tower. Then digitalization arrived and the cinema had to close. I had great memories left.

R.I.P. Arclight Hollywood and the Cinerama Dome.

I want to print logo and images on 35mm film To prepare slides in projector for logo projection Can you suggest me what are the printer and films required for this?

I want to print logo and images on 35mm film To prepare slides in projector for logo projection Can you suggest me what are the printer and films required for this?

0:41 CORRECTION: the first CinemaScope movies up to about 1956 had a ratio of 2.55:1. This was often coupled with stereo surround sound and at least 3 separate (left, centre, right) dialogue channels. The separate sound channels can still be heard today on some movies on RUclips.

I want to print logo and images on 35mm film To prepare slides in projector for logo projection Can you suggest me what are the printer and films required for this?

Bhai 1 film roll mujhe bhi chahiye kitne ka milega

How long did the mag heads last before the HF started to fail?

Thanks the information

Nelreco FP 70

finding test loops is almost impossible these days. They sometimes come up on ebay and are always very expensive. I was fortunate to know someone who had a few and was able to get them. I have enough now to do my calibrating. I run a CP500

Kon kon projector nal pyar karda hai

Hello from France! I’m just starting to seriously collect 35mm prints and I recently got an FP20 in poor condition that needs restoration. I was wondering if you might have a wiring schematic to help me convert it to work on 220V mono power or some tips on how you dit it? Thanks a lot! ;) Best, Alexis

Dolby SR 4.1 Channel Dolby SDDS dts 5.1 Channel Cinerama 6 Channel

nice

Thanks for sharing that content

Dat heb je mooi bedacht, spaart toch weer een 1800 mtr. spoel uit. ik was zelf nooit zo gek op dit type spoel, ik gebruikte altijd als het kon de metalen 1800 mtr. spoelen van Philips of de lichte draadspoelen, daar kon zelfs iets meer op dan 1800 mtr.film.

what the chance the connect parts wrong?😊

It's a wonderfull clip. Thanks 😃👍

RIP Arclight Cinemas.

Very brave to use so much film on a reel so small!

Почему фильм покрыт бумагой , а не в полиэтиленовых пакетах? Как должно быль по правилам?

Nada se compara ao verdadeiro cinema. Imagem fotográfica projetada . Vídeo não é cinema.

Инженерное решение в старых моделях кинопроекторах вызывает изумление. Всё изготовлено с точностью до микрона, поэтому старые проектора дожили до наших дней и работают ни хуже современных. У меня проктор 1973 года, он как новый.

Hey could you cover setting the feed and takeup tensions?

La cruz fe malta o rueda de ginebra.... Que invento. El cine es posible gracias a ese mecanismo genial

Where can we obtain 35 mm films, dont expect them for free, just having trouble finding any.

This was my job for more then 35 years working as a film projectionist

Do you know what size belt to replace on these? I've been told a 6mm thick silicon o ring is a better option and greatly reduces running noise but I'm unsure what size to go for

I'm so lucky your channel exists as a new FP20 owner, thank you for these videos! I'm working out at the moment how to convert the mono PE cell to stereo

Do you know where to get replacement belts? Mine is I believe the original, almost 60 years old and showing it's age

16 mm splicer give me one number

In south india dolby was not famous at 90s time mainly theatres on mono sound and stereo sound playback for songs and fight scenes some big theatre have 4 track stereo scope sound after that they directly change to dts and processor is usl inc stereo and ultra jsd 80 &100

Super

The music started to make me think of Tron. And then i saw it was Wendy Carlos that composed it, and it all made sense :) all in all nice video showing the different tests loops.

"Do you insist on Philipps? Or do you you want quality rightaway?" Popular saying in the 1950s/ 1960s. I learnt from Philipps employees. WEll, at least these projectors became really good before they were discontinued by Kinotone. Our image in the theatre is among the best I know of. Stability, evenness of light, silent running, sound pickup. Can't be any better on a well serviced Kinotone FP 30 D from the 2000s/ 2010th years.

According to the manual “CinemaScope” by 20Th Century Fox, the original width to height ratio was 2.55:1. It was later changed to a standard of 2.35:1 for all anamorphic or “Scope” presentations.

I only watched the whole video because of the music 😃

A butt splice (end to end) with film cement will not hold. No way. In the USA we always made a one sprocket hole overlap and scraped off the emulsion from the piece to be cemented onto with the other piece of film. Nitrocellulose film stock was replaced with acetate safety film by 1950 or before.

The intermittent movements in all projection systems eventually wear out. You had a have a spare.

I've tested those old Carl Zeiss anamorphs against modern counterparts. They can still hold their own, put side by side, against new Isco and Schneider lenses.

😍😍👍

Very interesting! I have a Philips fp3 projector 35mm, do you know how can I project a 1.85 film ? Is there any kind of mask for it? Thanks

Excellent video, very interesting.

35 mm❤

Where do I can buy two FP20 Kinoton projectors?

Piranha was not a 3D movie in the 80s. Perhaps you're thinking of Parasite 3-D. And of course, it was Jaws 3 and Friday the 13th Part 3. Interesting to see the projection equipment in action.

Hi! Do you have any videos that shows how to transfer/mount a 35mm film print on core onto a reel?

Oops, a mistake. Cinerama had 6 perforations. This has been adjusted in the subtitles and with an extra info card!

Loved the clip from beginning to end❤