Видео

Perfect video, great music, no fluff. Thank you! For the side with the fuel pump, its easy to unbolt and push aside.

😊

Please please help us please

I'm so glad I found your video I'm hoping you can help me and we have a the same tank but it's an 80,000 BTU and he has the vent on top of it going up and angling out towards the side of the tiny home and I noticed that yours goes completely vertical and we always get an e8 error code and we're taking a shower anytime we use the hot water and we only have the max temperature at 113°. Do you have any idea what we're doing wrong???

Better than a husq 120 mkii?

Great job especially for an 70yr old 👍

how do you remove pin

Thanks for making video. Its helping me alots. I am installing one ..yita home 17000 btu

It worked! Thank you so much.

That's called "shoemaker" work.

You'll regret welding the wheels on when they develop flat spots and won't roll. Then you'll have to grind the welds off and replace the wheels instead of undoing a few nuts and bolts. Welding makes them "unserviceable" You'd have been better off making a dolly that fit the generator so it could be removed and placed on solid ground, otherwise it's going to "walk" when it's operating. Think things out better.

Glad to see he's being safe with his welding sandals on!

Welding the wheels onto the generator frame may be easier, but if a wheel fails, then it's a big problem.

How high above the range is it?

900cfm for only $263.00? That's a powerful hood at a great price.

I just sold my 445 husky!😊

I found a roomba on the street with a charger, with the same error. Im gonna check the charger and order a capacitor

Laughing here, because I had the clutch assembly spin right off the saw today after I had taken it off, replaced it and tightened it down. It's easy enough to do, if the unit hasn't fused in place. Mine wouldn't come off until it had a couple of days with penetrating oil. But again - spun itself right off of the saw, and I had it tightened down.

Great video and great music! Thank you good sir!

I just hope and pray that Tractor Supply keeps selling the 00 Cotton Picker Grease. My Tractor Supply only stocks 1 quart at a time. It takes me about a month to get 4 quarts so I try to stay stocked up on it ahead of time.

i have vent in the back to the wall. can i use it for that?

Great video, always screw the screw as far in as possible before hitting it with a hammer than back it out a little to finish, I wish they all came a part this easy LOL, "DANIELSPARTSDEPOT"

How do I find the repai manual

what happens if we just pour in the new liquid on top of existing one? Is it ok to do that?

My two friends have tried everything, even comeecialy made stuff just for that! ....they got into it badly! I hope they take what i told them seriously...Baking soda really helps! I had gotten into some poison weeds before, applied baking soda paste, aand rash was gone....the same goes with bug bites, wasp, hornets etc...

if everybody had all those tools knew how to weld and had heavy metal laying around, maybe the video might help

Music is a little too loud

Another long musical introduction. Please folks I appreciate your creative need to entertain us, but

Can you use 140W or high temp grease?

what was the measurement you got for the hole you drilled through the wall? i can’t figure out measurement to make my hole, and mine is similar to yours. thank you

Changed the capacitor as suggested and it immediately blew.

Very Professional

Just replaced the battery and got the error 5, just took out the capacitor and it measured 200uf, not good, so a new capacitor installed and now on test.

Absolute effing genius, I got a bulk C battery shipment from Amazon, when I ordered D cell. Thanks to you I am gonna be able to use them!

Vielen Dank für das Video! Mein Kondensator war ebenfalls defekt. Fehlerbild: Keine Fehlermeldung am Roomba, aber ein langsames kontinuierliches Entladen des Saugers. Kondensator war nur leicht gebläht. Ersatz mit 470uF / 50V / 105C und alles lief wieder perfekt 🎉

This is awesome about to try now! Hated this thing until I saw that!

How do you switch it from Celcius to Farenheit?

Bleach works

How do you get the rope back out

Vielen vielen Dank.

THANK YOU SO MUCH ITS 3:55 am and within seconds im not itching anymore, seriously dude thank you so friggin much I’ve been DYING, baking soda for the win!

Great timing! I bought this off Amazon a few days ago and haven't gotten around to installing it yet. Thanks for the video, I'm looking forward to getting mine installed

They list this 24000 btu as having the cooling area of 1500 square feet. Do you think that is accurate? If not, what do you think the actual cooling area is?

Did this come with freon or did you have to add freon yourself?

If you value your hand, don't use gloves when using drill press

I had the exact same issue, and I followed the info here and replaced the capacitor, and the issue is fixed. Thanks for the post.

Why don’t you show the set up?

Your using it wrong. You work a mini tiller backwards.

Thanks a lot. Wish I would read this before buying a new battery. And just remark - I measured capacitor after removing it - it was aprox. 110uF. This leads to 3 possible reasons for this problem: 1. designer mistake (usually designer must put twice higher value than required to compensate aging); 2. Capacitor parameters doesn't correspond to marking; 3. Capacitor temperature environment is too high (higher most of the time than normal which is supposed to be 25C). So, when you buy replacement buy the one with temperature grade 105C, not the one for 85C. And if you find higher capacity in same form factor - better use it (of course voltage must be 35V+)

This was a pain to do but i did it. Tipped it like you did but onto a car seat which helped. Deck came off like a champ but was a pain to get back on. PTO clutch nut was a bit but a hammer on a socket wrench took care of it. Engine pulley luckily slid right down belt went on easy but the idler spring fought me but i got it. Then the deck was a pain to get back on but i eventually got it. Had to attach the back j hooks first then use the triangle piece of metal on the front to tighten it up then i needed a ratchet strap to get the belt back on the idler wheel on the deck but i got it and i now have a working mower. I cleaned out the deck all the grass and fluid filmed the deck and greased the blade bearings and everything works.