Видео

With my first set of Tannus, I likewise saw the same phenomenon, the liner flattening out, however that was due to the fact that I never deflated the tires after rides, and the constant air pressure over time changed the cross section at the center of the liner, which in my case measured out to a value of 3mm, compared to the advertised cross section at the center of 15mm. I'm on my second set of Tannus and when reading the fine print in the installation and instructions they recommend deflating the tires after each ride, and then inflating to your desired pressure before each ride (I find that a bit extreme myself). So I spoke with a long time bike mechanic (friend), and his recommendation was to deflate the tires and then re-inflate the tires once a week, which in his opinion allows enough time for the inserts to rebound to its original form! I typically deflate my tires on a Friday night, don't ride on Saturday, then re-inflate on Sunday or Monday which is certainly doable at least in my case!!

Thank you, your video was informative unlike the last six that I watched, some fella used or bought a $500 stud gun and ended up using it to put studs into previously studded tires, this will be my first time doing it so I will not be removing studs out of my tires first, I ride an EV skateboard Karma and I want to use it in the winter and I don't want to repurchase anything so once again your video was more informative than some of these other dip s****

I’ve had Tannus in for a few months now in my rear 4” tyre and haven’t had any flats. I have suspended the bike and let the air out to allow some spring back but have not pulled it out to check - it’s too difficult getting that stuff back in. So far I am happy with the outcome.

I’ve got an actual car horn on my bike, I would definitely think that bikes should be required to have horns like that so that way they can communicate with actual cars, you know?

Hi I want to know what size of spoke you use ( my wheel is 26” x 4” )thanks

hi. i have a few questions for you. 1) what is the width of the frame between the dropouts on your bike? 2) what is the width of the bottom bracket? 3) how do you tension the chain? 4) give me a link to the shop where you bought this in holland?

Working on mine since yesterday. I'm using metal stud screws and will glue another tire or maybe a piece of rubber. I will be tryying on another pair of tires another idea, using m4x0.7x6mm set screw. I plan on screwing them upside down so I have ordered knurled point and half-dog point set screws. I think that will work well and I wont have to go through the tire

, You'll be Deaf Before you Know It. .

. Pedestrians have more right to walk in the Cycle Lane than you have to ride in it. The Law requires that you should slow down and be prepared to stop, when approaching a pedestrian .

Great Video man. I'm planning to do it next week but I got a question about the tire pressure, should I use it on low pressure or high?

Considering they are just some sort of rubber they cost a lot. I had imagined they wouldn't go flat like that or they would lose like %20 max which is acceptable. But yeah, they are worthless cause don't forget that they add crazy weight to your tires.

I see this all the time here in Toronto, biking is THE WAY... and now the provincial government wants to remove a bunch of bike lanes here in TO... wtf. 🙄

Good morning. Dude you made your dream in life:) Good luck in business 🎉 . 171124

Hi, how did them Sturmey Archer's hold up in them Bbshd Fatbikes hold up if i may ask? greetings from Switzerland Mr. Smartcommuter--

thank you for the video, most comprehensive regarding stud on bike for winter, I like you referenced what the couriers are using and why. I am in Montreal/Canada, here the bike tracks are cleaned by the city, but you never know an icy patch lurking around 8-)

Which one can I scare people's dogs away from me from because they don't pull in their leash and let the thing get 2 inches from me or stop it in front of my bike

awesome video the 28 tooth is not aviable, so i had bought a 26 and 22 and put them instead of the 18 less top speed but more reactivity ^^

I have one one my mountain bike and frequently enjoy shifting under load. I may be missing a gear in the middle. I'm not sure. By the way: I laced it 2 cross not 3 because you get too much angle at the rim when 3 cross.

If I do food deliveries on an E-Scooter, and I guess i'd be leaving my scooter for 5 min tops, which would you recommend to get that will be enough?

THEY ARE A SCAM. BS COMPANY WITH BS CUSTOMER SERVICE DO NOT BUY

Homeless people may they learn from your example

Holy shit guys

Blah blah blah blah... damn

Did shut up and hook it.. damn you guys talk too much

6 figures off that trailer? The hustle is real!

What kind of businesses can you run with a cargo bike? I could see a lawn care business with an electric self propelled push mower.

Its so practical in an urban work environment, truly genius.

That combination heavy haul work vehicle would be like a luxury top of the line 18 wheeler in developing countries.

*I had a cargo bike based business. Something got stolen off the bike almost every day.*

Cant wait to see it in action dude

I appreciate your choice to use bike instead of cars. Canada is so so car infested and car dominated it's getting very unsafe and insane for anyone outside a car. drivers act as an agent of ciaos in streets and city design and laws encourage them to use their car to endanger other people. it's just crazy

Great explanation.

Seems like I came to the right place. I have a steel frame bike like yours, it's heavy but I want to get it up to speeds of 30-40mph. What power BBSHD do I need for something like that?

HI I'm in the Griffin town area as well, I may need a wheelbuilder/ advice for a hub Drive tandem bike. Thanks.

You've got 1000 subs now. Was 999 before I found the channel Going to get tough this winter Don't know if I can find a factory studded tire for my 29" beach cruiser

i have a 20x4.0 rim but can a 20x3.0 innertube fit and work for a 20x4.0 ? Lets say if i don"t have a 20x4.0 innertube can a 20x3.0 be a substitute ? My next question is what if i have 20x4.0 inserts can a 20x3.0 innertube fit inside a 20x4.0 inserts ? if so what will be the psi to fill the tire up ?

How does the sturmey archer hold up

I don't see those inserts as a viable option for torquey e-bikes. More or less for analog mountain bikes and cruisers with a larger tire diameter. I do think it is a pricey little product.

My old one blew up on me while filling it with air 😂 I just ordered this one so let’s hope that doesn’t happen again.

It's not a 33% drop from direct drive to low gear, rather 25%. The ratios of all S-A 3-speeds are 0.75, 1, and 1.33, so you can do the math. However, the percentage _increase_ from low to high does calculate to 33% increase in both steps, ie, 33% from 1st to 2nd, and another 33% from 2nd to 3rd. Also, if you change the chainline by adding spacers to the axle, you would have to re-dish the wheel because it wouldn't be centered in the frame any more. However, if you do it by putting spacers under/over the sprocket (or flipping a dished sprocket, as you showed), it won't change the centering of the wheel, just move the chainline. 😀

Interesting findings, thank you. I got an ebike with 20"×3" tires, & after I got a flat on a very crunchy & spikey offroad trail, I started looking at options. I went with the puncture resistant liner, and layered the old tube in the new one, and also added latex liquid sealant, & I feel that is pretty good. I saw these & seems awesome but way too expensive, especially now that I see these results. I may still do the affordable verison and get pipe insulation from a hardware store, I wonder if it will flatten like the Tannus. At any rate, I added a small air pump to the tool bag, & would probably add spare tubes & sealant to the bag if I were to take it to work, but that's a stretch from here so probably not unless last resort. I use it mostly for fun in the parks, fishing etc.

My life is complete. If only we could pump air from biking?

You're doing it wrong. R T F M.

Get the bike horn by "Juiced". It's way better and also has a bike alarm.

Not the top best anymore 😂

Do you think thumb shifter will work as a replacement for the revo shifter?

I have the 5 speed version, I recommend never power wash near or on the hub. Sturmey Archer Ball races have dust caps only.

What size brake adapter did you need for the front?

I just picked on up a couple of weeks ago. And I’m absolutely enjoying it.

I wanna see a hub motor with integrated 3 speed drivetrain