- Видео 2
- Просмотров 16 305
PopeAutomotive
Добавлен 27 фев 2022
Posting various automotive videos to help others in similar situations.
3800 Timing Chain Replacement (2007 Buick LaCrosse)
I am replacing the Camshaft and crankshaft sprockets along with the timing chain and dampener while I already have the timing cover off and because this chain has over 200k mikes on it.
I originally took the cover off because I suspected the timing to be jumped due to the car running terribly after I tested everything else and came up with no definite causes to why it would not start again.
Still has a crank no start condition and I suspect parts of the wiring harness will need repaired since everything else works.
I originally took the cover off because I suspected the timing to be jumped due to the car running terribly after I tested everything else and came up with no definite causes to why it would not start again.
Still has a crank no start condition and I suspect parts of the wiring harness will need repaired since everything else works.
Просмотров: 7 600
Видео
2007 Buick LaCrosse No low beams/dims HDM Relay
Просмотров 9 тыс.2 года назад
I am simulating a common problem on this model car 2007 Buick LaCrosse. Some of these models have a headlamp driver module relay that malfunctions and cuts the power to your low beams on your headlights. In this video I’m showing you how to jump the relay in case of an emergency.  Jumping this relay will give power to low beams but will not turn the headlights off until jumper wire is remov...
great little video, i have 2006, same car, my lights COME BACK ON after i have pulled the key and turned them off! yeah, just sittin there, on they go all on their own . . . problem with the same relay?
Thank u I’m desperate to get my Lacrosse going after a head gasket rebuild it runs great 😅 now just getting the dum lights on 🤩
Genuinely, thanks for posting this video. Simple instructions for a simple task that don't make me feel like a dumbass for not knowing? Thanks a ton 😁
Thanks you so much! My lowbeams suddenly cut out while i was driving to the night shift and now i know why
This video honestly helped me out, thumbs up dude.
Good info thanks. Since the high beams work, one other option is to take 3-5 strips of masking tape and put them across the top half of the high beam light. If you have blue tape or duct tape that should work also. The idea is the block the light amount and block the light that is going up. So its enough to see the road but not have your full high beams at other drivers. You may need to experiment around with it. Not long term solution, but enough to get you home or until you can buy a new relay.
Which one is the fuse for the cigarette lighter
Thank you, very helpful❤️