- Видео 15
- Просмотров 185 590
Polymer
Добавлен 8 мар 2006
Truck prices in the US are INSANE! How about $15000 for a Chinese one?
Truck prices in the US are INSANE! How about $15000 for a Chinese one?
Просмотров: 1 143
Видео
Beijing, China - driving (2022)
Просмотров 2542 года назад
Negotiating through one of the few remaining Hutongs in Tongzhou, Beijing, China in February 2022. Music by: Unicorn Heads - Early Avril
Thrustmaster T-LCM - INVERTED and MODDED! HOW TO video.
Просмотров 29 тыс.2 года назад
Some tips and tricks on inverting the Thrustmaster T-LCM sim racing pedal set. This could be 'inverted' by simply remapping the clutch and gas pedals in-game, but I do a hardware swap of key components in this video to permanently change it to an inverted pedal set. This is not necessary, and you could simply remap the clutch and gas pedals in-game, after swapping out the springs. (For a more d...
Fanatec CSL DD order canceled
Просмотров 4,9 тыс.3 года назад
Was going to wait for the FANATEC CSL DD wheelbase, but they delayed the initial September 20th, 2021 ship date to October 28th, 2021.....3 days before it was supposed to ship! 🤬 Jumped ship to SIMAGIC.
Fanatec CSL Elite Power Supply - PROBLEM - must check!
Просмотров 3,5 тыс.3 года назад
Please inspect your FANATEC CSL Elite and/or ClubSport v2.5 power supply. Just noticed that mine is frayed at the strain relief! 🤔🤬 Way too dangerous to use as it is. No idea how this happened either. Item is ENDOR6200-2400750P
Fanatec CSL DD - Boost Kit 180 hacks - Power Supply GUIDE - get 8 Nm for $10+
Просмотров 61 тыс.3 года назад
UPDATE #7 / January 7, 2022 It appears a PSU from EDAC or Edacpower model # EA11811K2446 doesn't work with the CSL DD for some [yet] unknown reason. Best to avoid buying this one. UPDATE #6 / October 27, 2021 All these DIY power supply solutions seem to work, and many have now successfully 'upgraded' their CSL DD from 5 N·m to 8 N·m by using a cheap aftermarket PSU or their existing Fanatec PSU...
$25 DIY 👨🏻🔧 **8Nm** Fanatec CSL DD 200W Power Supply Pack (Boost Kit 180 alternative!) 💪
Просмотров 25 тыс.3 года назад
A quick & easy $25 DIY build for a 24V/200W power supply, that should work with the Fanatec CSL DD wheelbase and give you the coveted 8 N·m. The power supply unit used here can be found on Amazon: www.amazon.com/gp/product/B07GFD3FQ4 Alternative link to another seller: www.amazon.com/Aiposen-Transformer-Security-Computer-Project/dp/B01B1PREK6 (if a 200W PSU isn't available, you can also try 240...
DIY Monitor Arm EXTENSION for sim racing Triple Monitors!
Просмотров 8 тыс.3 года назад
Monitor Arm too short??? Here's a DIY project for a monitor arm extension for the two outside single monitor arms. I couldn't find a triple 32" monitor arm to give the required angles, nor any decently priced single monitor arm that extended enough. Initially I thought I could use the ones I bought which had 26.5" reach, but it didn't work. Way too short. So I made a 4.5" extension using 6" lon...
Assetto Corsa: fun Saturday afternoon group drive in LA Canyons
Просмотров 1443 года назад
Assetto Corsa: fun Saturday afternoon group drive on LA Canyons map recorded as screen-capture of triple monitors, hence the ultra wide aspect ratio.
BeamNG Offroad Caravanning Scenario (with ReShade)
Просмотров 753 года назад
Just a quick video using BeamNG
3rd Ring Road, Beijing
Просмотров 9 тыс.5 лет назад
A quick video of busy daytime traffic from a view from a bridge over the 3rd Ring Road in Beijing, China on a nice, sunny day in May 2019.
United Airlines 737-800 landing at Newark, NJ (EWR) airport
Просмотров 1005 лет назад
A short clip of the United plane landing at EWR on a sunny day.
Danmoto Carbon MK2 on Kawasaki Ninja 300 ABS Winter Test Edition. HIGH QUALITY STEREO!
Просмотров 4 тыс.7 лет назад
Danmoto slip-on Exhaust CARBON MK2: sound test on 2017 Ninja 300 ABS Winter Test Edition. CRANK UP THE VOLUME, or listen with headphones! This was recorded using professional equipment and in ORTF Stereo (Office de Radiodiffusion Télévision Française). I prefer ORTF to X-Y, but that's just a personal preference.
Mouth Wide Open (Creed): Howard Stern's Baba Booey Music Vid
Просмотров 41 тыс.18 лет назад
Music Video: SAL the Stockbroker sings "Mouth Wide Open" a take off of Creed's "With Arms Wide Open"
ive got a dd1 without a psu supplied with it when i bought it of someone would the 36 volt 10a 360w work for time being i know its 120 watts short of the power brick fanatec sell but couldnt find a cheap 500w 36v psu next day delivery also the pin out is 2 positive and 3 negative with a pe sense pin with the pe sense pin do i shove that into ground or the v+
I have 24V 260W power supply hope it has amp limiter inside couse its almost 1/3 more powerful than boost kit
Are these kinds of power supplies better or worse than the brick types? I'm no electrical engineer but it's switching noise something to be worried about? I'm about to buy a Chinese one with variable output for my Moza wheelbase. Thanks for any insight!
Pending on what base you use you can swap the pedals o n the base
I know this was 2 years ago, but do you know what the angle is? Like did you hang them at 45 degrees or what ?
No, no: definitely NOT 45 degrees. I just settled for an angle I felt most 'right'. You should be able to see [sort of] what that angle is from the video. I never measured it.
@@Polymer Any chance you could measure the top gap versus the bottom gap for me? From your video it looks like it's just about 80mm on top and about 25mm on bottom.
Hei, I'm 2 years late since release of the video but maybe if you see this comment I would just like to ask if Meanwell RSP-200-24 would also work okay I heard that LRS work good but I couldn't find anything about the RSP. Thaks for this very helpful video.
I quickly looked at the specs and it seems okay, yes. What's interesting, is that it's about double the price than the LRS model. Also, it adds an active PFC Function, but I have no idea how that would interact with the CSL DD. It may work, but I can't give you a definite answer; I'd personally go for the cheaper LRS one.
what pins should be 24v and what should be ground in the 4 pin CPU connector? Looks like you connected top right, and low left to 24v, but other sources says that both top should be 24 v
You can watch the longer, full video here: ruclips.net/video/wVgVxpWgBOM/видео.html. Pin layout is mentioned at around the 2;53 mark. Pin #1 and Pin #4 are 24V positive, Pin #2 and Pin #3 are 24V negative if you want the BOOST 8 Nm. If only pin #4 is positive, you are running it in 5Nm (no BOOST) mode.
@@Polymer Thank you so much!
dude just buy some 8020 profiles and mount the monitor on them..
No, thank you! :)
@@Polymer would have been cheaper than buying 3 monitor arms
@@IvanGreguricOrtolan I built a complete Alu profile rig in China (using pre-cut 120x40, 80x40 and 40x40 profile according to my design) for ~U$140.00, incl Monitor stands. The build in this video was deliberately NOT using alu profile, but wood instead. That was kind of the whole purpose of it.
@@Polymer ah no I meant just for the monitors, the rest is fine in wood
@@IvanGreguricOrtolan Yeah, fair enough. just wanted to keep this one alu-profile free, and not have the monitors be supported on the floor. I wanted to prove (to myself) that the wood design was strong enough to hold the monitors as well. But your point is definitely valid! 👍
I checked mine and it is slightly better than that and still working with csw 2.5. do you reckon I can wrap it with electrical tape and use it as boost kit as I'm upgrading to csl DD?
Wow... The soldering skills of your wife are impressive.
What do you think about cammus c5 and setting with stonger power supply like 180W (19v) normalny is 140W ( 19v, 7,3A) and now I saw that they even hange for 120w is this will work better ,is this might damage the wheel?
Love it geat :)
Is that Sal singing?
Yes: "Music Video: SAL the Stockbroker sings "Mouth Wide Open" a take off of Creed's "With Arms Wide Open"
Missed that@@Polymer
@@disgustika No problem. 👍 This whole thing goes back a few years! A funny thing: I had asked Sal for a pic of himself so I could match the singer to his likeness; he sent me a tiny, poorly lit, low resolution pic; then once completed, he complained: "Is that supposed to look like me?" :)
Hahhaahha typical Sal@@Polymer
I inverted mine last night, problem is im using my clutch as the gas, gas as clutch, the clutch spring I didn’t know was much more, idk stronger? The resistance I didn’t think was that much, but I also wonder, the more resistance on your brake the better it is usually you don’t ever want to lock up the tires, so with more weight essentially to what I use now as the gas would that leave me being more accurate on my inputs?
Any idea how to calibrate them after theyre inverted using the T300 wheel base, spring swapped and mounted already? They work right in game, albeit not calibrated. When I open the calibration tool it still shows the now accelerator pedal as the clutch and vice versa.. this mod may be my only choice if I want to calibrate them
For people that stumble upon this video for the CSL. Heres the booster model/part number itself: endor 6200- 2400750-15C01
Where can i get a new power supply? I am looking all over the internet but no results. Please let me know!
Where are you in the world? If US, check amazon.com
I live in Holland! I allready checked but at the review somebody said that the thing he bought not good enough was for his csl elite.. thanks for the quick response!!
I was also scared with the commend and the power box maybe i wreck my base with it? I tried to have connect multipale time's with Fanatec email, calling but no response. Only when you order for some 1500 euro's on stuff they can send it in 5 days but when something is broken no one is at home...
@@XS11154Hi, ik heb het zelfde probleem… waar heb jij een nieuwe gekocht? Ik ben nou al 2 kabels verder…
Contact met Fanatec proberen te leggen. Lang verhaal kort. Het duurde 3.5 maand voordat ik het juiste bericht kreeg met een voorstel en een offerte om zn blok te kopen.. of ik nog even na 3.5 maand tijd 80 euro wou neertikken voor een "nieuw" blok. Er is slecht contact te krijgen, en het nieuwe blok heeft de zelfde goedkopen bagger bedrading als mn eerste. Ik ben niet te spreken over hun klantenservice. Ik hoop dat je wat kan fiksen. Succes !
Works a 300w Power supply from logitech g pro dd i have 1 Power supply and ordered a fanatec csl dd with 5nm
My PSU can't go over 23.5v, the wheel run normally for me. Do you think i get less nm cause of the low voltage ? thx
My PSU can't go over 23.5v, the wheel run normally for me. Do you think i get less nm cause of the low voltage ? thx
no, that shouldnt change the nm. What pins on the 4pin connecter should be 24 v and which should be ground?
@@sjelstrup Honestly i don't remember but you can find draws on internet easly. Thx for ur answer mate.
You didn't have to switch the circuit boards inside the pedal set there's an inversion button on the steering wheel which converts your pedals is switches your gas pedal and your clutch pedal for when you inverted upside down you went through way too much just to do something you will automatically does with a switch
Not on all wheels, no. But I mention this in the description; what I do in this video is not necessary, as it can be done in software. I went through this because I wanted to check it out, and remove the weights, and fiddle with it.
The 4th option with the 300 watts power supply. Is this a permanent option or you don't recommend it for long term usage?
Absolutely usable for long term, yes. I was initially thinking option #3 might be temporary only, but since then I believe some have used even that permanently.
In the csl dd what is the negative and positive? 4 pin = 2+ and 2 -?
To get 8 Nm, it's pin 1 and 4 = V+, and pin 2 and 3 = V-. Same CSL DD but only 5 Nm is pin 4 = V+, and pin 1, 2 and 3 = V-.
@@Polymer thanks works fine at the moment. My wheel arrived without original power suply and i didnt know how to conect that haha
Popular video. These are all sold out on Amazon.
What angle did you manage to get for the pedals base?
I can only get the psu with 10A. Will that work
What could be the reason that I only see it say 6Nm on fanatec app after doin this method?it even changed to "boost kit" but when the slider is at 100% it only says 6..I thought it was supposed to be 8Nm! Am I losing power using an extension cord?
Not enough info to answer properly, sorry. "doin this method" is too vague. The CDL DD is either 5 N·m or 8 N·m depending on how the connection is wired, and the output capacity of the PSU.
@@Polymer nevermind apparently there's a toggle switch for linear and peak idk how it got switched to linear but thats why it said only 6Nm not 8Nm
@@dctalon82 Oh, cool. So you're getting the full 8 N·m now? Nice!
@@Polymer yes thankfully....it def wasn't feeling right for awhile maybe after fanatec app updated maybe it switched it too linear..that sux I want ALL THE POWER NOT SOME LOL
@@dctalon82 Awesome!
Great video! Would you not need to use a ferrite?
What the??
Hi this may be a stupid question but would a 150w psu work ? I guess I won't be able to push the 8Nm but would it still be able to reach something like 7Nm or will it just have no difference ? ^^ Thank you for the video though and super super clean work on your end, big props !
It might get hot! :) Not sure why you'd not just go with a 180W or higher PSU; unless you already have one laying around, maybe? But you are pushing your luck, it may very well be that if it's a REALLY good 150W/24V PSU that you could 'get away with it'. And thanks for the kind words...
@@Polymer Thanks for the reply!! Indeed I have one laying around which is why I am wondering^^ It's a meanwell PSU so I think it's not bad, dunno about REALLY good. Anyways I guess I won't risk it and go for something higher then, thanks again!
@@Polymer @Polymer Hi again, sorry to bother again haha. I managed to hook up the CSL to a 240w psu i found for cheap, and it all works good now TYSM again ! Now my new question is, when you ask for 100% FFB in the Fanatec hub, does it draw 180W, or will it try to draw the 240 my PSU can push? And, correct me if I'm wrong but, if it would to try and pull the 240W, i would have to put around 67% FFB for it to draw those 180W ? Sorry if this was answered already, didn't wonder very deep into the comments
@@RocKzDG it will draw what ever it need to get to 8Nm...likely even less than 180W...it will never draw more than what it needs to 'generate' 8Nm...
@@Polymer got it, tysm again 🙏🙏🙏
10/06/2023 works!!!!!!!!! Thank you very much for the information. use the second option, but with a 200w source. 👏👏👏👏👏👏👏
AWESOME!!! 👍👍👍 (Considering I made this video BEFORE the product was even released, and without ever owning one or even seeing one, I am very pleased it worked out so well!!!)
😱,😂👏👏👏👏👏
Anyone tried UMEC Digipos UP2002-01 24V 8.5A 200W?
Is it anny possible to buy replacment for this power supply? I had the same siutation after guarantee and I have to buy new one
You should be able to, yes. here's one on eBay...no idea if any good. Buy at your own risk: www.ebay.com/itm/325190098393
Is there any safe way to case it?
Sure thing: the longer version of this video has enclosed cases as examples: ruclips.net/video/wVgVxpWgBOM/видео.html
With this power supply, will I have more than 8Nm? I have put a 240watt one and I think I notice the strength that with the 180watt one..
No, this does not increase power - it's still 8Nm. You can put a 24V/5000W power supply on it, and it's still only 8Nm.
👍💜️💜️💕💖💖
Ren Min Square
Ren Min Lu Beijing China
Great video, you sound like Brian Badonde 😀 if you know who that is....booo bello!
Thanks...I think! lol Had to look Brian Badonde up. :)
You took apart the pedal completely unnecessarily. In every game, in the settings, you can specify which pedal should be the gas and which should be the brake and the clutch.......
Yes, exactly: it's mentioned in the description.
Front row seat... are you the train Conductor? Is this another one of your hidden talents?
Hahaha. That was during COVID. I was the only one on the train, and almost the only one in the airport.
Great video! Nice setup you have!
Cheers, Ebojager! :)
@@Polymer Hi! I was making a channel for my VTC and saw your channel on HAGAR/Popcorn's page :) Can't wait to watch your China videos too.
@@ebojager Cheers! Yeah, I have a ton of other videos....but haven't got around to edit them all together. I have a build video of the wooden sim rig, for instance.
Will you sell me the original weak spring you removed from the accelerator pedal?
Dang, I'd send it to you for free, BUT I don't have it anymore. All that stuff has been thrown away! :(
Great diy!
❤
i just inverted mine this afternoin, but i didn't touch any wire, just inverted clutchband accel springs, inverted the pedal set, and re-configured in game accel and clutch pedals
Yep, that's in the description, and the easier way to do it. :)
I had the same issue with my monitor arms. I solved it by placing the outer arms futher away from the center arm and that worked a treat for me. In your case that would have ment a longer piece of wood to mount your arms on. For clarity I am using 3x 27" screens.
Yeah. I was surprised that no "extra long" monitor arms exist for the larger monitors in a 3-monitor setup. We have to get inventive! :)
@@Polymer agreed. they only need to be a few inches longer and problem solved.