Видео

Thanks 😊 Masively appreciate the compliment. Unfortunately we don't currently sell this, it's a one off. There are lots more episodes showing the jeep finished and painted, then driving off road and firing the machine gun. There's even an episode where we show it off at a car show. Enjoy!! 😉 👍

It has five forward gears, plus reverse. Thanks for watching 🙂 👍

Thanks! There's another 4 episodes already out there for you to watch, you can see us driving the jeep, firing the machine gun, and even taking it to a motor show! Thanks for watching 😊 👍

Thanks for watching!

Hi, we took most of the measurements from this RC Jeep which is amazingly accurate. rcmodelshopdirect.com/shop/electric-models/electric-rock-crawlers/roc-hobby-1941-willys-mb-1-12th-scaler-rtr-roc11201rtr/?srsltid=AfmBOor-M7V1PcrB9i7P54_JgC9xRD2RzqJ_2wi8rXBG12rY9JjYQFNc8no&gQT=2 We also researched lots of Jeep forums to confirm that the dimensions were correct. The RC Jeep is 1/12 scale, our Jeep is 4/5 scale. So measure the RC Jeep part, multiply by 12, divide by 5, then multiply by 4 for your final size. Simples 😊👍 Thanks for watching!

@@oliverbanford thank you so much Best wishes ❤️

Sorry for disturbing you... what if I want to make full size willy jeep ..like original please tell me what I do ..🤔

Not sure what that means, but thanks for watching and commenting 👍

Thanks, and thanks for watching. Hopefully you've watched the rest of the episodes, the Jeep turned out amazing.. 😃 😊 👍

@pradeepjoshi4166 Thank You 😊👍

@@pradeepjoshi4166 Thanks 😊 👍

We did, check out the channel @OliverBanford 😊 👍

Thanks Pradeep! There are more episodes to watch though, you can see the jeep fully finished and painted, and used off road with its paintball machine gun... enjoy! 😉 👍

Thanks! 😃 👍

Hi, it has Suzuki Jimny axles (shortened) and transfer case. The engine is from a 1986 TRX250 Honda quad bike. You can see the entire build from start to finish on our channel here: @OliverBanford Thanks for watching! 😊👍

Do you mean the written comments from viewers? If so then you should be able to select translate. If you mean the commentary within the videos then we may look to convert to multiple languages and upload individual versions. Thanks for watching! 😊👍

You can watch the entire build from start to finish here: @OliverBanford

Thanks for watching 😊👍

@oliverbanford Sir please send me the dimensions sir I'm really waiting for your reply Please help me

No idea. Gearing is slightly reduced due to the Jimny ratio, but we've only ever had it up into 3rd gear so far (it has 5) and that was fast enough..! Thanks for watching 😊👍

Yep, 1980's Honda bullet proof reliability. It's amazingly powerful for a 250.

It's amazing what you can accomplish with just a dirty finger.. 👉 Thanks for watching 🙂 👍

Yes, we really need to get round to making and fitting the wiper system. We have a big trip planned across Scotland off road soon, so I'm sure we'll need windshield wipers..! Thanks for watching 🙂 👍

Yes you are! Great to hear from you mate. Glad we didn't frighten you off with the machine gun tests... 😉👍

@UHO221 Make sure you watch all of the episodes, the jeep is finished now and it turned out incredible.. 👍

@UHO221 Thanks for watching 🙂 👍

Full chassis length is 2500 from rear to the front edge of the front bumper. Mid-points of the chassis leg overlaps are at 700, and 950 measuring from the rear of the chassis, this leaves 850 between the final overlap mid point and the and the front of the chassis. The 1st chassis cross-brace, or "ladder rung" is right at the back of the chassis, then the centres for the next three rungs are at 750, 900, and 570. This leaves 280 from the final "rung" centre to the front of the chassis. Hope this helps... Thanks for watching 😉👍

Извините а можете скинуть фото с размером рамы...

You're welcome 😊👍

@@edwinmanzano1597 Couldn't be anything else, could it.. 😉 👍

Thanks for watching 👀 👍

Thanks 😊 👍. That's the glovebox 😉 Lots more to watch on this build. It's finished, complete with machine gun. We took it to a motor show! Enjoy.. 👍

​@@oliverbanford Ахах, я ошибся 😁. Я имел ввиду кронштейн на 8:27. Понравился весь процесс изготовления, думаю, в целом прототип изготавливался похожим образом.

@@bobboboff5326 Ah, that's for the spare wheel! You can see the wheel in position later in the vid.. 😉👍

@@oliverbanford понятно. Всегда удивляло как в военной технике все грамотно продумано, каждая деталь для чего-то и может использоваться универсально.

Yep, everything has its purpose.. You should go and watch the rest of the build now, it the Jeep jurned out great. Thanks for the comments 👍

The tabs are welded to the back side of the posts, and the front side of the braces. Therefore they are removable/boltable 😉👍 Thanks for watching..!

Cheers 😊👍

Yeah, it was a great day. The jeep is still covered in small footprints and paw prints.. !

Thanks Swordjo! Good times mate... 😊👍

Thanks for watching and Subscribing! Lot's more videos of this jeep on our channel 😉👍👌👌👌

..and I'm fairly sure I had the best time of all 😊 Appreciate the comments, and thanks for following. 👍

It's 4/5 scale, so 2.5M bumper to bumper, and 1.15M wide panel to panel Thanks for watching.. 😊👍

Thanks mate, appreciate your comments and support throughout the build. Great to finally get it in the field and enjoy it with the kids. Just the motor show to go then we need to find the next project.. ! Thanks for watching.. 👍

It really couldn't be anything else, could it..? 👍

Thanks for watching 👍

Cheers! Hope you watched the main video.. 👍

Couldn't agree more 👏 Thanks for watching.. 👍

Thanks for watching 👍

Thanks for the feedback. I can't argue. Finding copyright free music is a real challenge. The only relatively safe source is from RUclips themselves, but the quality is very limited unfortunately. Thanks for watching 👍

The seat hole was for the fuel filler on early jeeps I believe. Thanks for watching 🙂 👍

It belongs to my son, you'll have to ask him 😊 Thanks for watching 👍

Thanks Daf, and thanks for all of your support and guidance with the paintball marker parts, we couldn't have done this without you mate! Took the jeep and gun off road at the weekend so should be uploading some vids soon. We're also at the Edinburgh Car Show at Ingliston on the 17th of July which should be a blast.. 🍻 👏 ✌️

Thank You! And thanks for watching 🙂 👍

Glad you found it! No, we're not military. My late father lived through World War 2, and spent a couple of years in the army so the Jeep is a tribute to all three generations. Thanks for watching 🙂 👍

They're called Heim Joints. Thanks for watching 🙂 👍

Thanks! I hope you go on to watch the next episode, we got the machine gun fitted and working.. 😎👍

@@oliverbanford how much it costs to build one of these?

@@ncairguner We haven't kept a tally of the costs, but the materials alone run into thousands even before we consider the man hours. Labour of love..!