Видео

not very clear what you have doing ... we see the jump place 1 but where placing the second ? someone can explain please ?

Hello, I need to change the battery of my MP-CL1 project, what battery model should I look for?

Good evening Sorry for sending this message without prior knowledge. I have owned a Sony projector Model : MP - CL1A for several years. But unfortunately, 5 years ago, when the device was turned on. The device requested a software update. I did, but when I restarted the device, only the word Sony appears. The main menu is not accessed. Is there a solution to this problem, knowing that when the device is turned on, the white and red lights light intermittently? Very sorry for the leng .

If the device is successful charging the led is green??

There is also a way to reset the battery controller without opening up the device. Thanks to this video: ruclips.net/video/OMZK3U7qtJQ/видео.html

AM ALSO TRIED BUT ITS NOT WORKING

just short the G2 pad together with tweezers while trying to turn it on.. this video is rubbish.

Opening the impenetrable! Well done on getting in there. Not so sure about shorting the battery though. If this has you still with white and red lights flashing, de-solder the battery, charge at 400mA till 3.5v and re- solder connections. Plug in the USB and it should continue to charge the battery up to full. It should turn on with a long press on the power button. Good luck.

Not any

Hello....one more help for me please????i stiped the lense protection ,the little piece of transparent plastic between the proector led and us....Can i polish it???or buy it???thanks you

Thanks a lot for your vidéo!!!!!good job !!!

如果無法連線 手機 可以解決?

I disassembled the motherboard, disconnected the blue battery with a soldering iron and shorted it the feet on the motherboard and works for me

Hi

i have a toshiba satellite C670-1DR, can't get the bios password removed... any ideas?

what is the mpcl1a battery model name?

where can i buy the battery from?

Me salvaste amigo. La mia estaba pegada con las luces y no hacía nada. Probe y se solucionó, gracias 🇨🇱👏👏👏👏👏

It worked man, thanks a lot. Just be careful about power button as you can accidentally break it!

thank you

Like fake video totally unprofessional time waist

Thanks. This got me out of a jam today.

Why there is no battery on this model?

Did you short the pin 1 and 2?

Nice rig man

Nice is it a pre built and how much did it cost?

please help me how to clear bios password toshiba Dynabook R73/D

I had the two lights on problem and solved it by waiting for the battery to empty (lights went out) then charge it back up, works fine. This could be a better solution if you're lazy but patient.

Thanks

Why do you keep rubbing your hands along the projector? Are you a magician?

It's very difficult to open the cover! Can you explain more?

Same this device of mine, when now when i Turn it on, white & red lights start to blink, any solutionz plz?

What About Toshiba Satellite C55Dt-C5245 with mobo DA0BLTMB8F0 REV F, where is JPW or contacts for reset?

Hey...mine ran out of battery during factory reset and now won't boot up...gets to the SONY logo then red and white lights flash... anyone know a fix??? I took it to a service center but they said they can't help cos of some weird reasons...

this is the worst video i see in long time fuck lern to speak english

Just about the worst instructional video I have ever seen.

gracias me ayudo mucho el video

A few things to clarify on disassembly: - NO PRYING IS NEEDED TO DETACH THE FRONT COVER! There is a flexible plastic tab accessible from the left side of the "grille" which simply needs to be pushed inward to unhook, while pulling the front cover away from the projector. The front cover "hinges" from the lens side. Metal tool not recommended since it will just scratch/mar the plastic. - REAR COVER MUST BE REMOVED BEFORE SLIDING INTERNALS OUT OF THE CASE! Otherwise you will snap the power button's plastic hinge, or otherwise damage buttons, as was done in this video! Removing the full-length shim at the lens side partially frees the projector internals to slide towards the lens side. Use a blunt tool to push on the lanyard loop (beside the USB port) until the internals slide inward maximally. This unlocks the rear cover and allows it to hinge out and detach, much like the front cover. Keeping the internals pushed towards the lens side, you safely slide them out.

Are you short circuiting bios Chip pin 1 and 2 to ground??

죽어가는 프로젝터가 살아났다 감사해요^^

buddy doesn't go to understand what you're gibbering there,one that you say too softly two that you show it all chaotically

What about portege Z30-C

To unlock the battery protector, you just have to press down the power button while you conect and disconect the power cable. Then let it charge for a while and use it as normal.

this video sucks, pls learn how to hold the camera

It’s not working and your explanation not clear

Hi i tried this method and didn't work i'm wondering if i have missed some steps do you leave the computer on or do you turn it off then take the ram out? also with the tweezers are you touching earth then touch the pin on the chip?

HELLO HOW ABOUT TECRA A 50 i7 ?

Hallo.can you help me toshiba r830 notebook bios clean??

Power and battery lights on. Did this tutorial in about 5 minutes. Worked like a charm. Thanks man!

I tried it not working pls help me toshiba satellite c55-b854 i3 password