Видео

Its a focus got brain faster then mouth some times

@@kevinsmobileautomotiverepair You might want to edit the video, and put in a subtitle/note/disclaimer at that moment in the video that says "correction: I meant to say Ford Focus"... and/or mention in the description that you meant Ford Focus at the beginning, not Ford Fusion.

@copperkeyracing6167 the description says focus the tital says focus my words say fusion. Most people don't pay any attention to what I say and they just complain I did not show them step by step what to do. Can't appease everyone lol ya know?

And the issue with nor putting a rim in the dirt or concrete is what ? Do you honestly think that it damages the paint or side of the door?

Correct no need to pull the switches that's what the manual wants is to pull the switches out to remove

Tell that to a blind person.... but glad you listened to my explanation

Oh this is one of the messed up designs I have no words for the louthing I have for this job lol.

No sorry i dont

Listen to what I say and you will learn.

@@kevinsmobileautomotiverepair says the youtube mechanic.

@@rexcameron995 its alright you can think what you would like. My 28 years as a master tech says differently . I would though suggest that you do more research beside just RUclips for fixing your cars. Read a book or listen to auto book it might help you out some.

I glad it was not any more rusty then it was. I have a spreader for the back part now did not then. Makes the proscess a little less tedious.

its possible did you do any diagnostics to confirm that the issue is the range sensor?

I have not personally come across the stretch to fit belts on a Mazda yet

It gave up the ghost.

You dont have access to the places i get my parts from its for licensed shops only. You can look up an ACdelco part it is OEM

@@kevinsmobileautomotiverepair Okay thank you did the check engine light turn off by itself after the repair?

no a scanner will be needed to clear any codes

Your welcome

They are fun to get to in the front

Listen closely you will hear instructions I mainly bitch about how a pita it is.

It wrapped itself around the tensioner pulley

From the looks of it an oil leak was dripping on the belt some it absorbed it and made the diameter of the belt change and wrap around the tensioner pulley .

Clip part in the center lift it up and the clip will come off

Oh its gets rough here in ATL 94 here now to but 90% humidity

Welcome

Yes same setup

Yes same setup

haha well in the mean time your breathing it.

@@kevinsmobileautomotiverepair hasn't killed me im 40 yrs🤣

@@SICresinwrks more power to ya then

Seen a few that were 10 plus years old stopped up no air flow.

Turn your volume up some or get head Phones you can hear instructions. When someone calls something dumb when you cant understand verbal instructions typically lack the intellectual maturity to finish the 5th grade.

Welcome knowledge is power

@@kevinsmobileautomotiverepair I hate European cars. Lol

@spicythai2000 like anything else they just over enginear there's

@kevinsmobileautomotiverepair I'm a mechanic myself. I do alot of videos to help other people out. Mostly something I've found or did to help other people.

@spicythai2000 have a channel ill sub to you

No it attaches to the Heater hose at the other end .

They are all pretty much the same just the badge on the outside is a trim leval insides engine chassis are the same

So glad you stopped by and took a look. If you need some translation from English to sign language I sure i can help with that .

@@kevinsmobileautomotiverepairi think he means we actually want to see you do it

Nope because i was working cant hold the camera

Take it out the same way if it were not broken

No problem 👍

If you're sitting still and the ac is on, the fans usually turn on if the pressure is high enough.

@@kevinsmobileautomotiverepairhaving this issue with a 18 rogue sport I just picked up this week. Was sitting still with the a/c on and the fan doesn’t cut on, a/c started blowing luke warm after sitting parked for 15-20 mins. Fuses are good not sure what’s next

@@Jae1293yes thats the issue, replace the fan. I have the same issue

Thay are not so bad there are alot worse off then this one for sure.

if you watch the video and turn up the volume you can hear instructions just fine.

Did this help?

What advise are you looking for ?

It's a good one huh ?

its likely to divert fluid to a different area

Im guessing you did not watch the video? I literally point right to it.

@@kevinsmobileautomotiverepair Yeah I fast forward and skipped it. My mistake. Thanks for the info.

@@alsacs3635 No worry

My pleasure!

Most welcome!

It's a give and take. I post long form videos where I show everything and not holding the cam I get complaints. I make a short video where I explain everything and show some stuff I get complaints. I cant appease everyone sorry.

P240 is a turbo charger boost performance code so not likely a pcv would effect that. Pcv would sound like a major vacuum leak from that area and also high idle .

You don't have a timing belt it's a timing chain. Did you use mopar parts or aftermarket?

@@kevinsmobileautomotiverepair i Use Autozone parts

@vacaneto that's likely your issue chrysler computer systems usually don't go well with aftermarket sensors that need a vary specific resistance and reading voltages use mopar ones

@@kevinsmobileautomotiverepair thanks a lot, appreciated

Zoom zoom

As a professional for 28 years how do you think alot of stuff was taught what and how to do was given to us? It was books , it was reading and deciphering the information from service manuals. Even as an apprentice I was told to go read the service manual then start to work on it if I have questions see him. Im a visual learner myself but can also listen t what someone says and apply it. If you need to take notes during the video.

I like to give engineers a hard time =)

@@kevinsmobileautomotiverepair oh trust me! I definitely understand. I run my own diesel mechanic business and I stay away from automobiles and trucks for a reason lol Farm tractors and heavy equipment is my favorite and anything hydraulic. Anything ford past 2020 I wouldn't touch with a six foot pole. The poor man doesn't have a winch pulley to remove the cab for a majority of the repairs that will go wrong 😬 I like to befriend all of the mechanics at a dealership so I can get free resources of what to stay away from lol