Видео

How should we set up the v antenna

Very instructional. Everything important is review and simple words are employed. Teacher - student is a full match 1:1:1 SWR !

Hello VU3FML de VU3KFK. It also need a vocoder to be specified. I am so far trying but unsuccessful.

I tried meteor m2 4 also metop b but didn't saw anything other than thick blue line.

Brilliantly explanation and hands on demonstration. Best I’ve seen.

Very nice presentation and use full to new amateur radio members. De. VU2VNO.

Wow... very good step by step explanation. Was very interesting. Though not from a technical background I was able to understand and get the usages of each gadgets

Well done OB...I bought a cable from Ebay with CH340 type driver, no luck being able to connect to HRD with that, might build what you did..73's

Thanks for the demonstration!

You can eliminate all that by using an AOIC board a Rpi and a cheap Baofeng 20.00 dollar radio.

Really great from start to finish. Hope to hear you on air. HL1ZIX

Excellent instructional video I have been trying to build a shoort dipole in mmana had did not knbow how to add loading coils and calculate. this is the best video I have seen on using mmana-gl thank you sir. brilliant! 73.

It´s possible with IC706...????

Great technique! I like the way the antenna thinks you're part of it when you touch it! 😂 73 de 2E0HJN

Could you please clarify the following. 1] for the coil diameter -3/4 inch [ 19mm] diameter mentioned but the input in the calculator indicates 3.1cm? Also, the actual coil shown is closely wound, but calculator indicates imm gap between turns? Diameter of actual wire used is 2.5mm but calculator indicates 3mm?

Nice presentation. Very clear. Thanks!

Birds are celebrating there Victory after attempting attack

I have not been able to get Droidstar to work. I'm not sure if it is a problem with my local install, or a problem with my phone model, or a problem with Droidstar edit: or a problem with the user end of the user interface. I will have to dive back in and give it another try. As far as I know, I had everything set up. I waited many days for my login to populate. But, I never could connect. Wish me luck; I'll use this video by the letter as best I can lol

Thank you

Hi I downloaded and installed. When I try to connect IC-718 it locks up the program. I'm using com2 at 9600 baud any ideas.

Exactly the video/demonstration I was looking for. Well done! Thank you, 73 Lenny K2LAM

Very good, thanks

HOLY CAPASITOR... MOST USLESS USE OF A METER EVER SEEN... NICE WHITE NOICE .. WAY LOUDER THEN YOU YES I AM A HAM AND YOU CAN'T BE.. BECAUS YOU WOULD DO THE MATH .. THIS IS AS BRIGHT AS A BROKEN BULP IN A COLEMINE. .. .. you are the reson H.A.M's are called McDonald happy meal USER license operator.. And channal blocked .. you would never ever post anything a might want to see .. the level of nothing Nessie blinds me.

Good to see a fellow ham explain and demonstrate what he is doing. Good show!

VU3FML de VE7KKQ I have the same unit, I will try this out soon, I never knew about this feature, thank you for your video.

very good thank you !! just to make it clear; i thought if measure attenuation you only use the shield of the coax but you use shield and inner conductor..?! 2nd: if i use safer-software do i have to calibrate the vna device also or only load the calibration file from my pc which i have made with the calibration assistant? again thank you for reply!

Nice

Aniruddha, sent an email requesting radio club membership details, no response ?

Por que nao coloca a confecção do CABO ? Nossa esses videos nao tem função nenhuma !

I am making this with your mods

Thanks very much for making this video. I learnt a lot!

the beta version worked with win11pro. but now the keppler doesnt get updated. getting an error:(http/1.1 301 moved permanently) weather.txt. any help please. thanks

after going half way thru, i get the error that "PLL not locked" in the sdr section (using a rtlsdr v4). after that the wxtoimg does not install any file at all on my win11 pro. very disappointing esp after going thru so many steps. dont you have a simpler solution using sdrangel or some other software! thanks

Very good..de VU3ICT

Great video simply crystal clear, the coax patch you used are all the same size? What size? Does size matter or can it be 1/2/3 feet? Thanks

Very nice ! 73 , MM7HIR

best explanation of this content i have seen, thank you!

Fantastic video 👍

Good job brother

Hello Aniruddha , Thanks for this very informative video, when i divide the wire to 3 sections and try to make the middle wire as source , i dont get that menu option at all. how to do this ? Can you pls share this step?@aniruddha

You did a video about hooking the ICOM IC- 718 to the computer for FT-8 mode. Thank you. On that video I wish you had shown the face of the IC718 when you were talking about pushing the buttons on that radio. I have a special reason because the read out on my radio has deteriorated and some of the display items, I can no longer read so if you have the face of the radio on the instruction screen, it is a big help for me and I'm sure others. I have ordered the special patch cable connecting to the USB socket on the computer TO the back of the radio (mini phone socket. Jack is called Remote and here is the far right side socket looking at the back) from a vendor on EBay. probably know USB in ham radio means "upper sideband" And computer talking"USB" refers to the universal plug-in socket with the socket on the computer. I think we need to repeat that description as often as possible. Thanks very much for your instructional video.

Great job and measurements , going to do one 👏👏 my quis. How was the distance between you and other station you contact with ? 73’s

Seen with VU3TOH

Same setup here 😊😊😊

Greetings from Canada ,great video as always. 73 Rudy ,VA3RGS

Glad to see that you are a good homebrewer! Happy to work you today on 14.200 MHz. Wonder whether you are there on LEO satellites as well? I do come up on ARISS when there is a good pass. 73 de Jon, VU2JO

Great work 👏🏽 fantastic to show the design. Not seen anyone show us how to design a jpole on it. Well do sir 73

Great walk through of the design and fabrication etc. Very helpful. I will follow your video to build one for my location. Thank you. 🍻🤠🇦🇺

Wow Great🎉de vu3bxs

Extremely wonderful. Design, simulate, build and test!