Видео

😂👍🏼 I’m actually not a wood worker… notice the titles all say DIY 😂🤷🏼‍♂️ just doing this stuff on my pass time… but thanks for the encouraging words! 😂😂

@@afrazier2332 Yet your channel says Frazier Woodworking. So are you a shitty woodworker or a liar?

Thank you so much!

That’s awesome! A grain filler is definitely not a bad idea! It would probably save a little time on the wet sanding… for me I’ve usually just used the black dye as a base and sanded it down. The black will stay down in the lower grain and help accent the wood grain.

Thank you so much!! Yeah so I did the trim pieces in the corners to cover the pocket holes I used to connect the panels… I was planning on using dowels to fill in the holes but it ended up not working out very good so that was my next best option… not ideal but it worked out ok 😁👍🏼

Thank you very much! 😁👍🏼

Yes!!!😜

So this birch wood… and honestly I was a little unimpressed by the final outcome (as far as the sheen) but man it’s been so durable… nothing has damaged those counter tops so far… also I just recently ordered the N3 Nano Ceramic finish made by black tail studios and I think that is going to really bring the sheen up… I’ll let you know how that comes out

🤣🤣Ha Ha! That’s funny! Yeah it was only 220 and I didn’t spend much time on it so didn’t really run the risk of sanding through it 😄👍🏼

Thank you! 😁

😂👍🏼 thank you!

Thank you!!😁👍🏼

Thanks! 👍🏼

Home Depot special 😄👍🏼

@ thank you.

😜👍🏼

Thank you!! 👍🏼

😁👍🏼thanks!

😂👍🏼thanks!

Thanks so much!! The solo kits have been awesome for me! Neck pockets are always nice and tight 👍🏼 just use regular wood glue to glue it in place… I normally shield all my single coil pick ups with copper tape or shielding paint… but since these are humbucker pickups I didn’t do the extra work and they actually don’t hum or buzz at all! 👍🏼

@@afrazier2332 Thanks for the info! I definitely see one in my future.

Thank you! I appreciate it! 😁👍🏼

😁👍🏼thanks!

Gotta get the bell on!! 😜😜😂

Thank you! 😁👍🏼

😄 well… we’re about half way there on this kitchen! 😄🤦🏼‍♂️

😁😁thanks! Love you!

Thank you, I think

😄👍🏼 yeah they were cute for sure!

😂

Thanks pal 😄👍🏼

😂 I ended it about a month ago! 😜😂

😄👍🏼 thanks!

Thank you! 😁

😂😂😂

Thank you!! 😁👍🏼

😄👍🏼 well it’s only cause you can’t see all the imperfections 😜😂 but thank you!! 😁👍🏼

Thank you!! I don't know if there would be any difference if I put the pickup rings on before or after the strings... Is that something you have seen?

@@afrazier2332 Yes. On some bodied, there is enough room to shift the rings left to right as needed for proper alignment. If it plays and sounds good, it is good. Great build.

Oh ok, yeah there isn’t much room at all for adjustments after the fact and they were pretty spot on so it worked out. That’s good to know though, thanks!! 👍🏼

Thanks!! 😁👍🏼

My Etsy link is the on the final screen at the end of the video 😁👍🏼

😂👍🏼 believe it or not I was just thinking about doing a “guitar shaped cutting board”!! 😁👍🏼

We’re back in business!!! 😂👍🏼

​@@afrazier2332The Lord's Cheeps! 😂 You should make little key chains or something tiny out of your scraps and set up a shop called the Lords cheeps. 😂 #WoodChips 🤣 this is awesome! Love you bubba

Love this cutting board!!! ❤️ And I agree Brooke!!! Great idea!!!

😂😂that would be perfect!! 👌🏼

My apologies

Thank you!! Yes you could definitely modify the body with a router to make a trim bridge fit in there for sure! 👍🏼 I’d love to see your work if you end up building one!

That’s awesome man!! Thanks for checking out the video! Feel free to send over some pictures to my email if you would like (afrazier2332@gmail.com) For sure you need some air flow (why I put the vent in the cabinet) as far as a humidifier that would depend on the size, the amount of guitars, and most importantly where the cabinet would be stored… hit me up on the email and we can chat 👍🏼

Thank you so much!!😁👍🏼

Thank you so much!! Yes sir, it actually plays very good! 👌🏼 I did build this one for a customer but I build them quite a bit and they usually run about $800-$900 to build. That’s including the nice Seymour Duncan pickups. You can order it to any spec you like though 👍🏼

No cold wax! 😂

Beautiful!!

O yeah! I’ve actually done it on several guitars and I still have one I years ago and it still looks great! I always put a good clear coat on them as well to protect it 👍🏼

@afrazier2332 thanks ordered some leather stain today. It was cheap british tan. Gonna try it, never thought of the rit. I assumed it wouldn't work. Thanks for the info.

Nice! Yes, I’ve seen some guys use leather dye as well… I’m sure it will work great! 👍🏼

@afrazier2332 appreciate the vid. Compared to Stew Mac dye alot cheaper way to go...the only thing about the leather dye is that its alcohol bssed and will dry faster and probably more chace for error. I'm thinking of tan for most of the body and blsck rit for the edges as a sunburst. Anyway take care.

Sounds awesome! 👌🏼Would love to see your work!! Good luck with the burst!

😂😂😂

Thank you! 😁👍🏼

Thank you so much!! 😁👍🏼