I have a Deebot 900. The belt size is 220mm circumference, 110mm folded. Thats the measurement they give when selling, folded. Amazon has cassette recorder belt sets that contains belts from 40mm to 135mm. That is the set you might want to consider. Width is a little over 1mm, maybe 1.5mm. 110mm = 4.3 inches. I think 4 inches will do. remember, the size they advertise is folded. Hope this helps
Thanks for the video! I had the same issue, I took the belt to several hardware stores to find something similar...ultimately found a rubber "O" ring gasket by chance at my pool supply store that's used for a Hayward chlorine dispenser. Cost me $3.00 a bit heavier duty and better quality and works as it should.
Thanks for this video. I would get the LDS error and then if I used my finger to start spinning the LDS, the LDS would start spinning on its own and it would work. Not ideal since I need to manually do that every time I ran the vacuum. Watched your video, took it apart and the band was in tact. Replaced the band with a more sturdy rubber band and it now works perfectly. I don’t get it, but I’m glad it works!
Thanks for the video. I’m looking to replace the battery in my 907 unit. Do you recall how much disassembly was needed to get to the battery connector?
The exact same thing happened to my Neato Botvac, I used crazy glue to glue back the strap together, as it is almost impossible to fine another strap. Just be sure to use liquid crazy glue, not gel. Hope you can fix it..
Are you guys using the latest firmware/app? A few folks told me not to update the firmware because it was making it pretty much unusable due to all kinds of errors.
Thank you for sharing! Mine did that a few times and I took care of it with the tapping thing, which isn't fixing it anymore. I guess I have open it up.
I had the same LDS error, and after I opened up, the rubber band was also broken. Replace the rubber band with a normal red rubber-band and fixed back everything. It works! Hope the red rubber band can last... Thanks Ivan!
thank you for the tips. it helped a lot. got the deebot cover off with your tutorial. getting a new belt! if there's a way to NOT get a belt, post it😁
Just happened to me today. Luckily I still have 5 days on my warrantee!
Where did you buy the belt? Thanks
Thanks for your video
Thanks for sharing. I have the same problem. Unfortunately, I can't find any belt replacement in my town. I'll try on Ebay.
Thanks for the video. Same error here. So it was very helpful. Now I will try to fix it
Thanks. This helped as belt had slipped off the motor
I tried using a red rubber band but it keep spinning and the produce very diff kind of noise
That's for the video. My belt was intact, but disassembling and reassembling the unit somehow resolved it 👍🏼
Thanks a lot for the video! Where did you buy the LDS belt from? can you share a link?
I have a Deebot 900. The belt size is 220mm circumference, 110mm folded. Thats the measurement they give when selling, folded. Amazon has cassette recorder belt sets that contains belts from 40mm to 135mm. That is the set you might want to consider. Width is a little over 1mm, maybe 1.5mm. 110mm = 4.3 inches. I think 4 inches will do. remember, the size they advertise is folded. Hope this helps
Thank you 🙏🏻
Thanks for the video! I had the same issue, I took the belt to several hardware stores to find something similar...ultimately found a rubber "O" ring gasket by chance at my pool supply store that's used for a Hayward chlorine dispenser. Cost me $3.00 a bit heavier duty and better quality and works as it should.
Thank you!!
My 950 is not sucking anything but a little bit of dust. I just purchased it 1 month ago.
Thank you for this video. It’s extremely helpful!
Congratulations, and thanks for sharing. My lds spin, but had a different noise, stop and get the lds malfunction error.
Thank you .. u gave me the confidence to take it apart. belt was broken and I replaced with a normal rubber band. Thanks again.
Your video saved my unit! For less than ONE dollar!
Thanks for this video. I would get the LDS error and then if I used my finger to start spinning the LDS, the LDS would start spinning on its own and it would work. Not ideal since I need to manually do that every time I ran the vacuum. Watched your video, took it apart and the band was in tact. Replaced the band with a more sturdy rubber band and it now works perfectly. I don’t get it, but I’m glad it works!
Hi Ivan, do you think this would work on a 930 as well?
Hey Jackson, can you please let me know what worked for you? i am having same issue for my 930 as well.
@@rashimehta0256 sorry mate, I'm my case it didn't work =/
Use a small rubber band, that will replace the belt, it worked for me.
480p60 what
Thanks for the video. I’m looking to replace the battery in my 907 unit. Do you recall how much disassembly was needed to get to the battery connector?
The exact same thing happened to my Neato Botvac, I used crazy glue to glue back the strap together, as it is almost impossible to fine another strap. Just be sure to use liquid crazy glue, not gel. Hope you can fix it..
Thank you so much for this video! I missed my warranty by 3 months.
Are you guys using the latest firmware/app? A few folks told me not to update the firmware because it was making it pretty much unusable due to all kinds of errors.
Thank you for sharing! Mine did that a few times and I took care of it with the tapping thing, which isn't fixing it anymore. I guess I have open it up.
I had the same LDS error, and after I opened up, the rubber band was also broken. Replace the rubber band with a normal red rubber-band and fixed back everything. It works! Hope the red rubber band can last... Thanks Ivan!
Was told by customer service rep that deebot is going to create a repair center hopefully sometime next year.
I am getting the same warning. The only fix from Deebot seems to mail it back. My warranty is expired also.