- Видео 21
- Просмотров 36 268
Testing With Mike
Канада
Добавлен 3 янв 2023
I have been fixing things all my life and can usually troubleshoot my way through any issue.
One Day I was asked by a wise man - "Why aren't you filming all these fixes??"
So here I am! Watch me fumble, watch me succeed. You never know what I might fix next!
Thanks for Watching!
One Day I was asked by a wise man - "Why aren't you filming all these fixes??"
So here I am! Watch me fumble, watch me succeed. You never know what I might fix next!
Thanks for Watching!
Nintendo 2DS Repair - Not turning on - Click sound then dead
A customer brought this in to me and mentioned their Nintendo 2DS was working fine then all of a sudden they heard a pop and it turned off.
Watch as I struggle my way through this repair and discover problems along the way
Watch as I struggle my way through this repair and discover problems along the way
Просмотров: 163
Видео
Golf Cart Not Moving - EZGo Dead! - Solenoid Replacement
Просмотров 205Месяц назад
I was called in to help fix this EZGO Golf Cart. The owner attempted to hook up a Voltage Sensor and the cart did not work after it was connected. Follow along as I troubleshoot this problem to find the source of the issue.
SEGA Genesis Black Screen Fix - No Power
Просмотров 2672 месяца назад
A customer brought me this SEGA Genesis Model 2 which was not Powering up and won't run any games. Watch as I work my Magic to restore this classic Console
FIXING AN INVERTER EASILY! - Krieger KR1500
Просмотров 6718 месяцев назад
Here I show you how to fix this 1500W Inverter easily! A simple fix restored this AC to DC inverter to working condition again. This unit had no power output and the display screen was black and did not turn on. -Model Krieger KR1500 USE CAUTION WHEN OPENING! SOME COMPONENTS HOLD A CHARGE EVEN AFTER DISCONNECTING!
How To Fix any Laptop Charger or DC Power Pack! Laptop Charger Repair
Просмотров 6758 месяцев назад
Yes! Even you can fix your laptop charger or DC Power supply with these easy steps. These may also be called DC Power pack, laptop power supply or laptop power pack. Be careful when repairing your Laptop Charger, if the wires get shorted out, you may damage your power pack.
Thorens TD 125 MK2 Repair - Record Player Motor Not Turning
Просмотров 2,1 тыс.10 месяцев назад
Here we have a Thorens TD 125 MK 2 that has an issue spinning. In this video I go over the likely cause of this fault and the steps necessary to repair this turntable. This is a 1970's record player with original components.
Hot Air Station No Heat - How to fix a hot air station
Просмотров 17910 месяцев назад
Hot air station not so hot anymore? Here we look at the Feita 858D with no heat output. The coil in this wasn't working anymore and therefore producing no heat. It was blowing air through the nozzle but was not hot. This method also works with other devices that have a heating element such as Hair Dryers with no heat. Hope you Enjoy! Consider Supporting me on Patreon at www.patreon.com/TestingW...
FIXED! Samsung TV Black Screen - No Power
Просмотров 155Год назад
Here we have a broken Samsung TV Model UN40F5500 Watch as I guide you through the steps necessary to troubleshoot and fix your TV The Multi Meter I used in this Video! www.amazon.ca/dp/B09GF2FZVY?ref=myi_title_dp use code:SY5WP8SD for a discount! Consider Supporting me at patreon.com/TestingWithMike
Fixing a Broken Traffic Light FOR CHEAP - Part 2
Просмотров 226Год назад
Salvaging this broken traffic light on a Budget. I am using LED pot lights that I picked up at a second hand store for $2.00 each, a stop light controller from Amazon and Light Gels from Amazon Stop Light Controller ENDMAN RGB Pro www.amazon.ca/dp/B09VLJ5779?psc=1&ref=ppx_yo2ov_dt_b_product_details Light Gels www.amazon.ca/dp/B00W93FQNM?psc=1&ref=ppx_yo2ov_dt_b_product_details
Samsung Galaxy Tab 4 - Broken Charging Port - USB Repair
Просмотров 1,2 тыс.Год назад
Samsung Galaxy Tab 4 not charging, broken USB. Learn to fix your own tablet for CHEAP! DIY Electronics repair with simple tools. Save money with this one simple trick The charging port on this Tablet is broken and not allowing it to charge. We saved this Tab 4 from being thrown out and entering the landfill and now its usable and photos can be saved! Check out the Kaiweets meter shown in this v...
Beats Pill 2.0 Not Turning On - Can I fix it?
Просмотров 2,2 тыс.Год назад
Beats Pill 2.0 Not Turning On - Can I fix it?
Fixing a Sony Sound Bar - No power - No Lights
Просмотров 18 тыс.Год назад
Fixing a Sony Sound Bar - No power - No Lights
Broken Connector - H&S XRT Pro Diesel Downloader Repair
Просмотров 790Год назад
Broken Connector - H&S XRT Pro Diesel Downloader Repair
Fixing a Broken Hamilton Beach Panini Press
Просмотров 3,1 тыс.Год назад
Fixing a Broken Hamilton Beach Panini Press
Jabra Stealth - Broken USB Charging Connector Repair
Просмотров 1,9 тыс.Год назад
Jabra Stealth - Broken USB Charging Connector Repair
I've been having trouble getting solder hot enough. My tablet doesn't have the replace entire part. It needs to be removed and replaced. I used to do board level electronics repair many years ago but it seems like the newer electronics are harder to do board level work. Any ideas? I'm considering seeing if a wireless charging port will work. Tablets can be expensive and it doesn't pay to take it in for repairs. I think I was quoted $80.
Get yourself some really good flux and a iron that has constant temperature. I only use genuine Amtec flux with my Weller WES-51 soldering station.
It’s probably a capacitor usually what goes bad on sony
lol you just yeeted that capacitor.
Traveled to the 9th dimension
Nice!
Thanks!
Well done! 👍
Thank you! Cheers!
I have one of these! They are a great sounding turntable!
They absolutely are. My uncle hooked it up afterwards and the only way I can describe the sound was "butter"
Can u put a new battery in my Jane’s stealth
Battery replacements are definitely an option. What is the model number?
did you take it off any sweet ramps?
Right after the video. Got some sweet air
Is there nothing you can’t fix? 😃
Look at my first few videos 😆
Cart no go. Cart Go.
Go cart go. See cart Go
Service manual is available if you Google "Sony HT-CT260H Service Manual" on manualslib
Got it thanks :)
You should check drain side of the mosfet to ground. There is probably a short somewhere further on. Can feel around for heat, use a thermal camera, etc. I might pick up one of these later that seems to have the same issue.
Great advice, thank you! I will definitely be revisiting this
I've been focus on repairing mine for a couple of days. Armed with the service manual I've ruled out a bunch of stuff. A lot of the light blue capactiors were fully open circuit. Board is a pain to work with. Use an ESR meter to check caps in circuit. If you don't get a good reading for ESR and capacitance then cut one leg off almost flush with the board and measure again out of circuit. If it measures good bridge the leg with solder. If bad heat up joint on intact leg and pull out cap. Liquid flux and solder wick from both sides to clear Replaced those. And checked all power rails are good. HDMI board communicates with PC but amp doesn't turn on, vacuum fluorescent display, controls, bluetooth, etc do not work. They are all controlled by the Nuvoton m0516 chip. It doesn't get warm either so I feel like it could be dead. Looks like most of the time U2 and U17 blow up for people as well as the capacitors. Search RUclips for Mcgyver Ct260 and you'll find an Italian guy who has 4 videos detailing his repairs on these. The service manual is easily found on google. It contains also the power rail hierarchy near the end which should help. U10 is the main brain of the device.
Yes! U2 And U12 were cracked for me as well. Thank you for this!
You're the sexiest electronic guy I've ever seen :)
Huh I remember them being bigger. Maybe it was because I was smaller.
There's a joke in there somewhere
Is that my sega? Wtf
Oh shit its the feds
thanks for help, gives me some ideas
Happy to help!
Many more memories to have.
Yessir! Thanks for watching
It’s alive!! ITS ALIVE!!!
Muhahahahaha
That's a Mega Drive sir 😛
Whatever Mr 🇬🇧
@@TestingWithMike 😘
What type of bit did you use to get the electric cable wires under the black housing (4) screws ? Please.
Oh it's hard to recall, either a Philips or a torx bit maybe. Whats the issue you're having?
@@TestingWithMike no worries I got it loose. Thanks for sharing your knowledge 🙏
I had the same issue! this video helped me solve the issue with my 125 MK2! Awesome! thanks a bunch!
Great to hear! I hope I earned your subscription
some sort of air ventilation system
I have something works already :)
You need one of those magnifying head lamps!!!
I want to look like the guy from Honey I shrunk the kids
I’ve the same. Can you fix this for me 😢 I’m not skilled enough to do this myself !
I havent yet found the proper fix for this. At this point it would likely be cheaper for you to buy a new one than pay for shipping and my time to repair
Good job! I'm happy it is running again. Subscribed :)
Thanks for watching 😀
Do u still repair those, I have one same issue?
Sure do
Waste of Goddamn Time
So is this post 😉
@@TestingWithMike you didnt Fix it! Atleast you Could've been clear in the title friend;IM just saying.
Sometimes the "yellow mustard" non-polar capacitors go bad as well; They don't typically short circuit but they can leak DC voltage a little or even go open circuit.
Great to know! Thank you
Ithink.its the wire where you pug to.the.socket
Can you be more specific
I bought a new 3-in-1 sandwich / waffel / grill master from LIDL..used it 5 times... it did warm up slow, but I thought it was normal for the model.. now it will not heat..plates are cold..but the lights are still on, when power is on.... but the watt-meter I passed it through, says 0 watt.. thoughts ??
Likely a blown fuse or thermal fuse. Going to the warming plates. Crack it open and use a volt meter and follow some of the testing methods I use in this video, and im sure you'll find the issue
@@TestingWithMike Yeah, it must be something like a blown fuse, or a wire that is disconnected... thx for answer..
i have Sony HT-S400,nothing showing on display but working is good
Maybe a similar issue to what happened with this one
I have the same sound bar and the same problem when i look at i finned out that i have burned IC. HOW CAN I GET NEW ONE PLEASE?
What IC is burned? Check aliexpress, I've found a ton of good chips on there
@@TestingWithMike I don't know how to order one
Search the chip on aliexpress, find what you need and order it up. Easy easy lemon squeezy
@@TestingWithMike I couldn't find the chip the number only show the uper one the lowers are burned
There should be markings on the board. What's the number corresponding to the chip?
Thanks its running, i m so happy ruclips.net/video/vCUWlNCp28o/видео.htmlsi=kAMjCidTO-20Ag9V
Thats great to hear! Glad I could help
Thanks for your help❤❤ he turns
You're welcome 😊
U2 and U17 I have the same issue worth a shot
Let me know if you get it fixed
@@TestingWithMike yes fitted and all working again.. U2- 3482A. U17- G5725ADJ Can get the service manual easily from the internet with schematics contained. But I would think those two the same. I can’t take credit for it an Italian RUclips video pointed me to the right area
Trying to troubleshoot a broken soundbar too and am stuck at the same point you are. In another comment you mentioned an IC that has cracked. Which one was it? Who knows, maybe one of us will find a fix since it is very common for those soundbars to break like this. Although it might be a different cause for each of us… but maybe not. Did you try the reset procedure? Take it off power for 1h then plug it in while holding the power button down and keep holding it for 60 seconds. Then try to turn it in. Unplug it, and re-plug it and try to turn it on.
Hey @constantinflux The chip i replaced was Q6 Labeled N7S2 or N752.. hard to tell. the crack was on the left side of the chip. I did attempt the reset procedure and it did not help. I still have hope for this but I've spent so much time on it. Currently its collecting all the dust in the workshop to hopefully be revived one day
@@TestingWithMike There is a Video o YT by an Italian person that iirc replaced the mosfet (?) that is responsible for starting the logic and also swapped some caps around it. I’ll post the link if I find it. Might help you as well!
@@TestingWithMike Found the video I mentioned: ruclips.net/video/n7o4YNPCatc/видео.htmlsi=xBcWTbgd6k9ss6AM you can turn on subtitles and switch to English subtitles. There are two more vids on his channel from a year ago where he is fixing another soundbar. Might be useful. I’ll check the mosfet in mine on Sunday. Maybe it’s faulty in mine too, who knows. Thanks for your video!
@@TestingWithMike Oh and also an important tip in the video is to drain the 400V cap before going in there… at least as far as I understood.. to avoid nasty surprises.
@@constantinflux I appreciate the video link, I will have a watch
Good idea! glad you are making use of the 3d printer in awesome ways
Truly amazing that i can create a usable object from a roll of plastic
Pretty cool! Can you share an Stl file?
www.thingiverse.com/thing:6331367
@@TestingWithMike thank you
amazing!
Thanks!
Might it be you had installed the new mosfett in the wrong direction?
By the way, I'm having the same problem of the soundbar not lighting. It happened after a cleaner had used the extension where the sounbar was for a vacuum machine. The other devices that shared the anti-surge extension are okay though.
Every chip has a marking on it to show pin 1. In this case, it's the top right indicated by a circle. This issue is very common and I have attempted to repair this while filming part 2. I found a cracked chip and even after replacing it, it still does not power on. Unfortunately, even with the schematics I cannot isolate the issue. I've had to shelf this for now until I have more time to poke away at it.
Did you ever get back to the soundbar mine has the same issue and was looking to repair it?
I did some digging and filmed a bit of it, tried swapping parts but no success.. this one really stumped me
Good job 👏 👍 👌🏼
Thanks!
Good job bro now I can fix mine 👍🏼
Glad I could help
Nice.
So nice.
Easy peasy. The fuses did their job. 😊
Sure did! Can't wait to use this
But what would blow all 4 fuses at once? It get hooked up to the wrong thing? Overvolted or amped?
My guess was reverse polarity when hooking up the batteries
Wanna replace a digitizer/screen for my kiddo? :P
Shoot me a dm
Everything looked good until the electrical tape. A small bit of heat shrink over the repaired wires would have tidied your work plus looked like it was professionally done or not noticeable at all, which is how we all like our repairs to look. I’m Only trying to give constructive criticism 👍🏼
I would have loved to, however I ran out of big shrink. I dont recommend tape but its all I had :)
Really good stuff man. I'm literally just getting into this stuff so this was super easy to follow. For future vids, could you explain stuff to us noobs like why the laptop charger is negative on the inside and positive on the outside?
Hey thanks! Glad you enjoyed it :) Not all are negative on the inside, but in this case the diagram on the charging block indicated it. Look on any brick, and you'll see a symbol with + and - with lines pointing to a half circle and a dot. That indicates the polarity