Видео

What model of snowblower is being removed in the video?

Love your channel I always find easy answers to questions that I would feel stupid asking. Appreciate you!

That big ass dog could care less about moving 😂🤣🤣🤣

Please don’t assume anything. I got on here to find the flipin dip stick only to find out it’s behind the guard. Btw, does your hydrostat whine so loud you have to wear hearing protection?? I never would have bought this if I’d ever known. My John Deere ( lost in a fire ) , had zero hydrostat noise

Thos video has helped me so much you have no idea. Thank you again.

Looking for a cab tractor just like yours. Why did you choose the 51” blower and not the 63-64” bigger ones? Great videos 👍🏼🇺🇸

Jerry rigging is no good need to fix it right there’s other adjustments on there sketches need to be adjusted to an 1/8 inch

Can’t even change from reverse to forward. Like it’s simply stuck. What does this first time old man do now?

Good job thanks, I have the same problem!

Were can I get that exhaust shield?

I just installed a snowblower onto my LX2610 for the first time and appreciated your guidance. I had the subframe on a furniture dolly, which worked great for me. I just used a 2X4 to give me some leverage and was able to get it up on the pins very quickly! Cheers!

Thanks, once more, for a great instructional video. It was my first time connecting the snow thrower, so this video was a life-saver.

I have one and i love it

I have the exact opposite issue, where the tension in the wire is too tight and broke the plastic portion holding the wire. I replaced the plastic cover and i can not pull the wire far back enough to attach the cable!? How do i release the tension in the wire?

You take care of your equipment. Good job. Your taste of music is awesome.

Hi, Thanks for posting. The floormat is a great tip. The LX2610 floormat is very similar to remove. If you have a 3rd function valve setup they cut the foam pad on the right side to run the wiring from the control lever to under the dash like the wiring which you have run under the mat on the left side. Great job and attention to detail. Dan 😊

For the "K-Connect" snow blower mount, remove both while still connected. You only need to remove the two mount pins and hydraulic lines to place on "T" shaped dolly. Two non turning wheels under the blower and one rotating wheel under mount for steering.

God DA***** you are pretty

Thanks, Red Fox. This video was very helpful for my first time removing my snow thrower. 👍

Great review , and great hair! ;-) x

About two weeks into ownership of my LX3310, thanks for the floor mat removal tip!

Why did you choose turf tires and not R14’s?

I see a foot print in the snow it shows 1 inch no where near a foot. Bad depth perception.

I just bought one and it turns on but doesn't ignite and shuts itself off after 5 secs..has anyone had any issues with that?

Did you burn out on doing youtube vids?

Would do better if you insulate your walls.

WOW WEE! I bought the same version before this weekend - 80,000 btu - but a different name brand - craftsman from lowes - it kept my garage at a toasty 50-60° all weekend in this frigid blast 9° outside - thats a 50 ° differential - i used diesel as kerosene here is 2$ more a gallon! My only SMALL complaint - the faint smell of diesel gets to my clothes and permeeates them. Maybe kerosene will smell better. Ill post a short of mine running on my channel

Good morning

I bent a blade mounting shaft hitting a stump - so I have some advice on how to replace blade shafts - also i just subscribed to your channel

Thats just exactly like my Murray

HOT! 🔥The presenter and the heater!

HOT🔥

Thank you for this video

I’ve been using Turtle Wax Ceramic on my L3940 cab. Much easier to apply than wax and it lasts about 12 months.

I bought a new kubota LX 3310 Cab tractor I will take delivery hopefully sometime next week. Thank you for your video on the floor mats and the cab and filters. Very educational. I have a lot to learn. I also got the LX 2963 blower and the LX 2940 - 4 point quick hitch sub frame and the K connect mid pto driveline and the LA 535 quick attach bucket. I am not sure what type of tires I will get. Either the Industrial or the R 14. I will be watching for more of your video's.

Put a bar through the pin holes. This will provide better leverage for tilting and moving the loader.

Thanks for the video. I just bought the LX2610 and it gets delivered on 11/30/22. Can't wait to get it, and now I know how to take off the loader and bucket.

hi wonder if you can send me a picture of the cable routing and the location of the support pieces go. i have a pr270 the plastic control panel broke. i didnt take pictures as i took it apart. now i dont know how to put it back together.

I keep my tractor inside when not in use …not fond of the crappy paint kubota uses considering how expensive these tractors are ! I’ve been considering some sort of wax to help protect the paint from fading but in all reality it is a tractor that gets worked. I do wash it 3 or 4 times a year depending on how dirty it gets! I always maintain all my equipment but not always anal about keeping working equipment spotless .

I’m looking for one just to heat up the garage when I’m working on the car or using the garage gym. Was there a big difference in fumes on kerosene vs diesel? Also, JP8 or “jet fuel” is on there so they can sell to government elements, like US Military, who will be authorized for “off the shelf purchase” and be running everything on JP8. It’s a kerosene based fuel. Same with JP5.

First thank you for this -- it's very helpful. I just finished my 50 hour maintenance. May I suggest a couple of tricks I tried that worked. 1. Tent aluminum foil over the wiring harness under the oil filter. It's tight, but it kept the oil off the harness and collected some in the foil. 2. I put a shop vac over the transmission fill hole, but offset a little. You don't want to suck out any tranmission fluid but you want some suction. When I removed the transmission filter I lost a little fluid, but it didn't gush. It sounded like slurping - someone sucking up the bottom of a drink with a straw. It pulled enough air up that the fluid couldn't stream out.

Wow I didn't know the floor mat came out.. thanks for this video..

How do you like the 51" lx2970 vs the 64" commercial blower? track width on your lx3310 is 53.7" just wider than blower. any issues?

Gettin ready to do this on our 3310..watching this to make sure I understood the manual! Thanks for make this video for us in the 3310 crowd 🤝

Look at a LockNLube Grease Gun Coupler, it's well worth the 30 or so bucks. Makes getting the coupler off super easy. Awesome video btw!

My poulan snow blower with 208cc LCT motor just leaks gas all the time. Runs perfect. But I can not keep gas in it unless I shut the fuel off. Is that the same problem you had?

To get that pressure to release, you can wrap a rag around the end, and jam it into the concrete quickly, assuming you can reach the concrete. With the rag over it, it won't damage anything, it's extremely quick, but be cautious of the fluid that will spray (the 2nd use of the rag). Be careful about pushing on those connectors as you described - fluid out = air in, which isn't good. Also - when I park my loader, I run all the hydraulic actuators all the way in. It'll take up less space AND protects your actuators from dust, dirt, debris, or potential damage while stored. Thanks for the video, happy tractoring!

Do you know the oil filter part number by any chance?

Great job doing all that maintenance, glad you had supervision to keep you on your toes :) :)

That cab is way fancier than my excavator cab. One good reason could be your tractor being meant to be used in wintertime. Most likely the water coming from melting snow. Not much to worry about. But removing the water as you did is really good. Thanks!