Видео

@@marymainville4214 you’re right, one should be green and the other is amber.

Hey Charles, I'm glad this helped. Thanks for tuning in. Stay safe!

Hey JuanManuel, I bought the extended lugs. The other ones only give you about 3 turns so I wouldn't risk it.

Hey liftjockey, IMO, the mount plate would be redundant in this case as the bumper guard already has mounting brackets already built-in. Thanks for tuning into my channel, much appreciated!

@@aspiringpro good point, I haven’t been on muddy trails this summer yet so now I’m curious how it will end up in that scenario… cleaning it won’t be fun

@@modXELA It's almost like they had designed it some some sort of lens to fit inside there. I'm so confused. lol

You're very welcome BumBee22. Walang anuman.

@@modXELA This spot would be a good "KILL FUSE SWITCH" location.

@@BumBee22 lol, you got it my friend. I was thinking the same thing. That will be my next video!

@@modXELA With the 10-amp fuse, it will require at least an 18AWG wire. I looked what is available: a wire harness with an in-line fuse comes with a 16AWG wire and so are the other parts to use with this build.

@@BumBee22 thanks for the info, good head start!

Make sure to buy hub centric spacers. Anyway, I checked forums and couldn't find any discussions on using extended studs with 1" spacers unfortunately. There's a chance that the spacers will already come with extended lugs so check the vendor first. On this note, I also sent a query to Bora and KSP for their input. Will share once I hear back.

@@modXELA wow thanks the for informing man. Definitely get back to me !

@@tomalgier9930 KSP Motor replied and advised that extension lugs are not required and provided a link to their product if you're interested (www.kspmotor.com/products/toyota-wheel-spacers-009bk )

@@modXELA that spacer comes with 20 open ended nuts & hardware. Is that all that’s needed for a full install ?

@@chharlorakim7346 I’m glad the video helped! Thanks for tuning into my channel.

@@djkatazyou’re welcome. thanks for tuning in.

It's pretty strong stuff but I can't say for sure if it will get rid of it totally. Maybe you can apply it a couple of times and see if that works but generally, it does a good job.

Hi aspiringpro! That's correct. The lightbar as advertised says 24" but in reality, it's shorter than that. Best way to put it is that it's like buying 2"x4"x8' lumber, it's actually 1.5″x3.5″x8'. I hope this helps.

Hey there... unfortunately, this is not specified on either the product website or on the actual product packaging. My best guess based on the lumens (3600), it will be between 12-15 watts per LED strip. This comes in 3 strips but I decided to only install 2 strips. I hope this helps my friend and thanks for supporting my channel.

LOL... you should see the front! Anyway, one of my followers just wanted to see how it looks as he's thinking of installing one that's why the video was just quickly put together.

@@Leoo-zv1gq as long as the housing is there, it will work. When you purchase, check with their technical support for confirmation and fitment.

@@DyegoPC1995 yes it does. I can take a video of it at night and will send you the video link to give you an idea.

@@modXELA That would be awesome!!! Thanks! 🙏🏻

@@DyegoPC1995 Here's the demo video... ruclips.net/video/ulILPVRzVe0/видео.html

Hi travblurr8043, I'm sure you did plenty of searching but I don't think it exists. I wanted to avoid all the cutting as well but I couldn't find one that looks similar to the BA or DV8 etc. However, if you Google "Toyota bumper guard" you'll see some that don't require cutting but they don't look anywhere close to this look. Good luck with your search and thanks for tuning into my channel!

@@Waikanefilms_ thanks for tuning in and supporting my channel!

@@teabee44 still works like it’s brand new! One of my most useful mods.

@@modXELA glad to hear. I'll be buying a set now, thanks.

@@teabee44 one thing that I ended up doing is I installed the switch in the back of the bed close to the driver side tail light. Works well for me. Anyway good luck with your install and thanks for tuning in and supporting my channel!

@@modXELA you're welcome, I was thinking about deleting the switch and locate the relay under the rear seat so my power from the bat will be as short as possible. My bed is lined with line-x so I'm guessing I'll have to mount it with hangers as I doubt the tape will stick long term, and we've been in the triple digits and I'm sure the adhesive isn't going to do too well by the end of summer.

Hey@@MaxBaker-r8m, I’m glad the video helped, thanks for tuning into my channel. I appreciate the support! Stay safe!

@@jaimieaddy1790 real interesting. I’m glad this helped, thanks for tuning in jaimieaddy!

Thanks Tennisnooob! thanks for checking out my channel 🙂

no issues with it since the initial install. Been offroading and camping many times and it hasn't moved even a bit. As long as you have lock washers and nuts tightened correctly, I don't see any reasons why it wouldn't hold.

@@blazeadams2499 did you install something new?

@@modXELA no never

@@modXELAi wanna make sure i said it right i changed the fuse it works , but the fuse blows in no time again

@@blazeadams2499 sounds like it’s grounded. I would have your dealer or mechanic look into it.

@@randy656 please read the video description. Instructions on how to buy it is there.

@@viper-fp9zw yep, I ended up with a 1.5” levelling kit and did the CMC.

Hit me up before you buy so I can give you my honest opinion. I also have a discount code for it so LMK! Cheers my friend and enjoy the summer!

I certainly will I'll look forward to your review of itnin the coming weeks or months enjoy your summer also and be safe.​@@modXELA

@@henrymalave1296 sorry bro, crappy recording equipment.

You are very welcome Angelo. Thanks for tuning into my channel. Stay safe!

Did you install anything prior to this?

@@modXELA Turned out they discovered the work box we took off shorted out something in the electric. Dealer fix and $300.00

@@ronaldpostoian1817 ouch!

You're very welcome bro! thanks for tuning into my channel!

Yeah, those brackets that came from Nilight are meant for external mounting. It won't work well with the Hiline wings application.

Hey ShogoKurihara, at the time of this installation, I still had the factory 265/70R16 tires and with the 1.5" spacer, it was rubbing a little bit so I just took out the front mud guards. I am now running 285/75r17 with 1.25" spacers.

Hey Mike... total weight of the whole assembly is 160 lbs. Winch with synthetic rope is 46 lbs, LED light bar is about 3-4 lbs, so 110lbs for the bumper guard with the D-shackles. I recently installed the TC-19339w Wings and that's an additional 32lbs.

@@modXELA thank you for the information.

@@Mike-cu6gk you’re welcome. If you are considering to install it, I would highly recommend that you install everything including the LED light bar the winch and the highline wing right off the bat. It’s a pain to do it piecemeal.

@@modXELA absolutely correct you did it was the best way everything in one shot.

Hi tamimahasan, sure, I would appreciate all the help I can get to grow my channel. Email would be preferred. Email me at modsxela@gmail.com please. Thanks brother.

@@modXELA check please

Change 15A fuse labeled as STP under the hood (assuming that it’s busted)

Replace the fuse 15a

Under the hood, marked STP

Hey Antonio, I'm glad you found my channel so thank you for tuning in. I'm glad it worked out for you. Cheers my friend!

Thanks SLH 👍! I appreciate your time!

LOL... yep, the "stealership" would've definitely gouged you plus the cost of towing but you don't owe me anything. I would appreciate it if you subscribed to my channel though! =) I'm glad you found my video and that it helped. Stay safe my friend!

Awesome! Thanks for tuning my friend… stay safe!

Sorry Cary, there is no model # specified. If you check out the product link, that’s all I have: amzn.to/3VniOwF

@@modXELA Thanks for the reply. I enjoyed your video and am getting ready to order this setup.

@@carybaker997 let me get you the link for the light harness..

@@carybaker997 below links are two wiring harness kits, and the difference between them is the switch, choose the one you like: www.amazon.ca/Nilight-Wiring-Harness-Switch-Warranty/dp/B071ZPX32N www.amazon.ca/Nilight-Wiring-Harness-Lights-Waterproof/dp/B073TYH14Q

@@modXELA Everything is ordered and on it's way. Thanks for helping me with this decision.

This is great information Himmet. Some have commented here that this happened to them when installing taillights. I guess those have LED resistors. Makes sense. Thanks for sharing, this is very useful info to me and my followers… cheers and thanks for tuning in!