Видео

Oh shit, I think I just bought this.

It would be difficult to balance my a7pro as it's a step through design, is there a stand for this type of bike ? and it's heavy at 77lbs.

Good video. Would like to point out you actually mounted the top bracket backwards. The way you have it in the video you're effectively putting more strain on the bracket because you moved the pivot point away from the vertical pipe and closer to the load (bike). Just my five cents. Thanks for the video.

Dessie Street

Metz Pike

Decent looking bicycle - workshop stand as it securely clamps the frame, as opposed to the seatpost, that some cycle shops use. 💪😮👍

Darrion Brook

How much weight dose it hold

Hey what do you call the little black stand under the rear tire?

Martin Kevin Johnson Anna Williams Donald

simple mecanic , reliable and easy maintenance :)

Wilson Nancy Williams Sarah Wilson Ruth

Martin Ruth Davis Sandra Johnson Michael

Still good?

Predovic Gardens

Martin Karen White Joseph Hall Maria

Dt swiss isn't recommended to put too much grease on Ratchet system this may provide to engagement problem or destroy Ratchets

thank you for the video man, was not sure if a mallet was the answer

After i tap the rebound bolt and try to undo it, it just spins and doesn't undo so no way of taking the lowers off 🤷‍♂️

Smith Eric Taylor George Young Richard

This is more of a how to take apart and put together vid. Didn't see that you added grease at all. Most importantly I was looking for how much you used.

Well, okay, I guess. I have a similarly designed one and honestly wanted to return it but I kept it past the return date. A very unwieldy contraption; noticed you didn’t show lifting the bike and clamping your bike down in the stand. Gotta have everything lined up otherwise the stand keeps moving away from you. It also seems like you have to hold the bike with one hand/arm and use your other hand to finagle around with the quick release turning and twisting it to get the right opening and tension to close tight enough to hold the bike where you want it. The heavier your bike the more of a pain in the butt it is. I would not recommend any stand setup like this one. Looks cool but the functionality will result in a lot of frustration!

Great bike stand for those wanting to work on their carbon fiber pedal bike.

I would be very careful about over greasing the ratchets. Use a very light grease and very little. Too much can cause the ratchets to stick in their toothed bore and skip. More of a potential issue with the higher tooth count ratchets. I damaged my 36 tooth probably from too much slick honey. My shop replaced them but said that they have seen a few damaged ratchets from that.

I miss my sb6😢

I bought one about 5 years ago. The plastic tube clamps break. I drilled a hole in the main tube and use a bolt to keep it up. The 2 legs are not as stable as the 3 leg kinds. Its fallen a few times. The bolt for the main clamp pulls thru the plastic. Its ok for a year or two but thats about it.

Nice video, but you didn't show which parts you actually applied the grease on. Was it on the two ratchet rings?

During initial assembly make sure to use the two same sized allen wrenches to remove the REAR bolt on the clamp support bracket, the CLOSED hole on the clamp goes here. The OPEN notch goes over the skewer. No need to rotate the vertical post.

I can't get the back lever and a little thumb activated unlocked mechanism to move whatsoever. You need to use this in order to swivel the clamphead and I can't get the thing to un lock.

Purchasing a similar bike stand...from Bikehand. As for the handlebar stabilizer. The one end goes on the the clamp arm (not the seat post) the other end goes to the bar. To latch it around the handle bar it's easier to wrap the tab around the bar and pull the tab end as it stretches to one of the holes. Repeat the process to attach on the clamp arm. It is very useful to have the handle bar stabilizer...especially when bleeding the brakes.

I got it a few days ago. Works great.

why didn't you take the hub apart without taking the cassette off?

Cool

What name brand is that bike? And where can I find it ?

Needed this video today!

Good review bud thank you ❤

Der montageständer ist bei mir nach 1 Jahr kaputt, würde ich nicht mehr kaufen.

Totally agree with the usefulness (uselessness) of the front lock down. I just use a bungee. Otherwise, it's a decent stand for the money, and I do like the tool tray.

any updates? still works well?

Hey, which hub is that? And with how many teeth? I think you're horny loudly. Mine is a Newmen ratchet but somehow yours sounds much better. Thank you very much great video. Greetings, Steffen

Have you used this to wash your bike? Any parts rusting out?

I have that same stand and I just use a floor stand to lock the front tire. But that is a sweet bike!

How’s the bike maintenance stand holding up?

I'm afraid of lubrication my dicut 240 36t ratchet hubs. Without any grease they are radicouls quiet. Shame to you dt swiss

Hey, what's the exact model of that Yeti ?

After 5 months of usage how is it holding?

Wow bro you're clamping a carbon frame... Use the seatpost!

How much end float should you expect in the free hub ?

First time owner of some DT Swiss hub wheels, will definitely do this as the noise is driving me nuts. And I say this coming from a set of Hope Pro 4 hubs which are notoriously loud, I think the issue is that the DT Swiss hub is much more metallic sounding than anything else I've ridden - and that includes FSA and Fulcrum which also have different pawl designs. On the plus side it's currently making me pedal more, anything to avoid the buzzing noise!

You dont need to remove the cassette to get to the ratchet