Видео

@@DanielRatkov-w6s - Leveled on Bilsteins 5100 front shocks. - Wheels are method 305 titanium. 17x8.5 0 offset. - Tires are BFG KO2 315/70R17 LT.

So I didn’t separate the actual face plate from the back so I didn’t see any bulbs exposed other than the little LED lights that illuminate the needle. So my assumption would be that little LEDs are spaced out to illuminate everything else on the cluster. In that case I’d say you either need to buy another cluster or see if someone could remove and re-solder another mini LED for you.

@@Camsh0ts Thanks for the info, I appreciate it.

@@JoseMartinez-bm5zu just leveled on Bilstein 5100s up front

If anything I feel like going on the outside would cause more of a gap due to the thickness of the 3M tape. When doing it on the inside, the tape is still slightly higher than the raised edges resulting in a more flush fit in my opinion. How I’ve done it on both s2000s I’ve owned and haven’t had any issues.

Unfortunately I don’t believe anyone makes them anymore :/ but the closest I’ve been able to find are these, but they don’t come with the side marker lights. You could definitely mod them to add them pretty easily if you wanted to though! www.ebay.com/itm/274697233451?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=ki0uMjYoT0S&sssrc=4429486&ssuid=Pu2DzEEjSdC&var=&widget_ver=artemis&media=COPY

@@Camsh0ts thanks for the info

I meant to include that in the video, but I did remove it right afterwards lol

After my engine wouldn't start due to a very weak battery my speedometer needle is 15 mph off.

Just a heads up, you’ll need to a do some slight trimming to fit this setup, but here are the specs! - Leveled on Bilsteins 5100 front shocks. - Wheels are method 305 titanium. 17x8.5 0 offset. - Tires are BFG KO2 315/70R17 LT.

@@Camsh0ts awesome, thanks for the info. I'm looking forward to more videos of stuff you've done to your truck!

Appreciate it! Everything is holding up well minus the little strip on top of the shifter. I eventually plan to take that off and I bought another carbon fiber piece that covers the black sides of the shifter that I haven’t installed yet. It’s a carpuride unit, here you go, try using code SCHAZ for 15% off. carpuride.com/collections/cp701/products/carpuride-w103-portable-smart-multimedia-dual-bluetooth-dashboard-console

Sorry, replacement what? Needle? I glued the original back together to reuse it if that’s what you are talking about.

So there are like 3 holes at the bottom of the lip and 3 holes in the bottom of the undertray, but only one lines up somewhat decently. I haven’t popped them in yet, but I will. By doing this, it will push up the middle of the lip more to a more correct position.

@@Camsh0ts thx for your reply 👌

@@Camsh0ts does the lip come with the clips? If not do you have the part number or size for them? I don't want to order the wrong size clips if it doesn't come with it because I was planning on trying to pop those in too so it wasn't only the screws on the side holding it in. Also nice name

@@cameron2289 the lip comes with all the mounting hardware you will need. Comes with 4 screws (2 for each side of the lip) and 3 plastic push tab clips. Just be aware that the holes on the bottom of the lip don’t line up with the holes on the underside of bumper. You will probably only be able to get one or two in

@@Camsh0ts Thank you!

So I used someone who another s2000 friend used to paint her whole car. He does work on the side when not doing it full time at his job. I gave him the paint code and I actually had him respray the front bumper and hood at the same time to try and get them all to match. Silverstone Metallic is actually a really hard color to paint match due to silver just being a hard color to match in the first place, along with the metallic in it, and also because over the 9 years the s2000 was manufactured, the same silverstone metallic paint code had very very slight variations from year to year. I think I paid maybe $500 or $600 for all of the respray, but it was a bit of a hook up. Should be less than that for just the lip at other shops.

@@Camsh0tsappreciate the feedback. I picked up a new old-stock AP2 lip from the UK in berlina black but need it sprayed Silverstone. My current bumper is pretty chipped, so I’ll likely look to find a new OEM bumper to get sprayed at the same time vs repairing the existing. Figured I’d give the gas door to the paint shop to do the best match they can with 17 year old paint. Good to know a general ballpark on cost!

Hey Dat!

Had one on my first s2000 and now this one, both have been great. Lots of people run them and I prefer it over actual OEM because way less expensive , looks close enough, and less likely to break from accidentally hitting a curb, parking divider or road debris.

Thanks Jamal! Hopefully this one is better than the first

It’s a carpuride unit, here you go, try using code SCHAZ for 15% off. carpuride.com/collections/cp701/products/carpuride-w103-portable-smart-multimedia-dual-bluetooth-dashboard-console

There aren’t a whole lot of comments to look through, but there were two others asking the same thing. I replied back with a link to the exact unit I bought as well as the promo code I used. Let me know if you can’t find it and I can send the link later!

It’s a carpuride unit, here you go, try using code SCHAZ for 15% off. carpuride.com/collections/cp701/products/carpuride-w103-portable-smart-multimedia-dual-bluetooth-dashboard-console

It’s a carpuride unit, here you go, try using code SCHAZ for 15% off. carpuride.com/collections/cp701/products/carpuride-w103-portable-smart-multimedia-dual-bluetooth-dashboard-console

I can only imagine! Not AS brutal, but Texas summers can get pretty bad too

I definitely have it on the list of videos to do soon. Truck was currently down, and have a video to release on the fix for that. Then have seat cover install video after that, then exterior mod overview.

@@Camsh0ts love to hear it!

Unfortunately I don’t believe anyone makes them anymore :/ but the closest I’ve been able to find are these, but they don’t come with the side marker lights. You could definitely mod them to add them pretty easily if you wanted to though! www.ebay.com/itm/274697233451?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=ki0uMjYoT0S&sssrc=4429486&ssuid=Pu2DzEEjSdC&var=&widget_ver=artemis&media=COPY

I like the wood grain trim, but I feel like the carbon fiber better matches the exterior of the truck now. Plus I wanted something new to spice it up a little.

Busy planning a wedding and work, but I’ll definitely get around to created and publishing more!

Not sure why I never thought about that… thanks for the tip, I’ll keep that in mind for next time I’m dealing with 3M double sided tape!

@@Camsh0ts aheads up It works but sometimes u get a few that are still a struggle when u use tweezers I did several overlays in my fx4 Ever thought about a steering wheel cover? I got one and i like it

@@michaelturano7522 so I was originally looking for a steering wheel cover, but recently I’ve been considering switching the whole wheel out for nice aftermarket one or a raptor one.

@@Camsh0ts Nice Id like to see u do a video on that

@@michaelturano7522 it’s a little lower on the future mod list, but there will be a video when the time comes!

Of course! It wasn’t too bad of a fix so you’ll be fine. Let me know if you have any questions.

Sorry to bring you bad news, but I don’t think they make them anymore… I just searched for a good while trying to find them, but the same ones with the marker lights have either been sold out for a while or no longer listed. I found these on eBay which are the closest thing to them (no rivet holes), but it doesn’t have the marker lights. You could always try giving these a shot and buying the marker lights and modifying the flares to fit them. www.ebay.com/itm/264605815136?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=iZ-sFoBRSnO&sssrc=2349624&ssuid=Pu2DzEEjSdC&var=&widget_ver=artemis&media=COPY

It’s a carpuride unit, here you go, try using code SCHAZ for 15% off. carpuride.com/collections/cp701/products/carpuride-w103-portable-smart-multimedia-dual-bluetooth-dashboard-console

@@Camsh0ts thanks man what about the dash mount? Is that the built right dash mount?

@@michaelprezioso4288 it’s a bulletpoint mounting solution mount. Here is the link! www.bulletpointmountingsolutions.com/collections/2009-2014-ford-f-150/products/rubigrid-2009-2014-ford-f-150-dash-mount-phone-device-holder-12th-generation?variant=40566188343411

Appreciate it! Feel free to subscribe for future content 😉

Are you talking about the radio face plate? Or the CarPlay unit on top of the dash?

@@Camsh0ts radio face plate

@@thereneff I bought it off of eBay, and I bought the sellers last one. I believe this style came off of a raptor and is “silver print”. I looked on eBay and found another one, and believe it’s the last one so I’d hurry and purchase it now if you can. www.ebay.com/itm/256056116396?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=M5Q9-iSbQs6&sssrc=2349624&ssuid=Pu2DzEEjSdC&var=&widget_ver=artemis&media=COPY

and the one you have upstairs that brings gps plz

@@thereneff here you go, try using code SCHAZ for 15% off. carpuride.com/collections/cp701/products/carpuride-w103-portable-smart-multimedia-dual-bluetooth-dashboard-console