Видео

Oh WOW !!! It was over at the Pick-N-Pull in American Canyon, but a few months ago, so you might want to give them a call to see if it's still there. Good luck !!

You're absolutely right, I didn't even think about that !!! Man, I should have picked that car up !!!

You and me both !!! I really should have picked that up, but I need another project like I need another hole in my head :)

My dad pulled a intake and exhaust from one to fix ours, he had to take the intake off to get to the wires which we pulled

We also took that right blinker missing on the yellow one 😂

This was a complication from several different junkyards in the Greater Sacrameto Area over that past year ... so some of the footage is a few months old :)

Nice!!! Glad that you were able find parts that you were able to use instead of having everything go to the crusher!!

Awesome !!! Blinkers are becoming surprisingly harder and harder to find in good condition.

Oh wow … Vegas is a bit too far, otherwise I would be over there in a heartbeat to see if they want to sell it!! lol 😂

Thanks for the correction !!!

The engine, transmission, and transfer case were all gone, so it was basically a bare shell. This was over at the Pick-n-Pull in Antelope, CA

Interesting ... never thought of that. Thanks for the correction !!!

Thanks for this analysis. The spline socket is an interesting idea ... I'll have to look into that. You hit it right on the nose, I mostly work on cars and don't do much around the house, so that's the reason I don't use SAE much. When I was looking for an everyday carry kit, it was mostly for working on motorcycles and cars, so I should probably change the title to Budget EDC Automotive Kit :)

Thanks for that correction !!!

Hahahahahaha !!! Go figure 🤷‍♂ I think the biggest issue is the potential for losing the locking bar, otherwise, I really like the Build Out boxes

Yeah, I really like the Huksy Build Out system. It's not much more expensive compared to the budget brands. I have the Hyper Tough Drawers and Dolly on order, so I'll see how they compare to the Build Out. As a home DIY'er, I think it's going to come down to who makes the best accessories :) Thanks for watching!!!

The tray won't fit well inside the drawers. The drawers have tabs that stick up to hold the dividers, so the trays won't sit flush with the bottom of the drawer. So you'll need to either file the tabs down or cut grooves into the bottom of the tray. Each tray is about 2 inches tall, so you'll only get one layer of trays in the shallow drawer, which is 3.5 inches tall. Hope that helps !!

@@kintsugimotovery helpful! Thank you!

Ohh, that would be interesting ... but I wonder how much bulk that would add to case? Might make it too large to EDC?

@@kintsugimoto want it for my truck

@@jameslong1644 The Husky Build Out Mechanic Set would work well for carrying in a truck: ruclips.net/video/UMNaHtCxk-o/видео.html

Thank you for watching and commenting !!! I'm glad that you found the video to be helpful :) I'm trying to get my airhead back on the road, but have some upgrades for it, so more videos coming soon. Good luck with your light bulb replacement ... hopefully disassembling from the top gives you enough space :)

Ahh, didn't know that. Thank you for sharing ... it's definitely a well-designed truck. Agree that's ahead of it's time :) Happy Holidays !!!

@ check the truck out closer, I believe the fenders front and rear weren’t welted like the rest of truck of the day. The curve of the bedsides really astonished me when I noticed it. I would love to have one of those trucks. Happy holidays to you as well.

@@michaelupton4523 I'll definitely take a look when I see this truck again. Yeah, I would love to have one too !!! These are definitely some of the best looking trucks that I've ever seen.

They are both really good boxes, but it seems like the Husky has more accessories compared to the Pro Gear, but you're right they both have features that I wish the other one had. There should be plenty of stock at the local Home Depot - they didn't run any good discounts this year, so the inventory seems to be sitting. Happy Shopping and Merry Christmas to you too !!!

After spending an hour at home Depot, I just ordered the build out system. Rolling cart, large box, small box, clear top organizer, and the 3 drawer. I appreciate your reviews on the system! It truly helped with my determination.

@@conanrdk Awesome !!! I think you're going to really enjoy them. After looking at several different brands, the Husky Build Out seems to be the best bang-for-your-buck system. Thanks for watching !!!

That would be awesome if they did !!!

Ahh, that makes sense!! Thanks for clarifying :)

That’s a really good price for the Craftsman … and I agree, there are definitely more accessories for the Craftsman vs Hart of Hyperstack

Sorry about that … it was one of my first times recording and uploading to RUclips. I’ll see if I can go back and make a better video

Hahahahahaha !!! Happy Holidays 🎄🎁🎅

But for how long I wonder? The Hart box was out for a while and seemed like it was doing well. Then Walmart brought out the Hyperstack and dropped the price on the Hart boxes ... to me that signals that Walmart might be phasing out the Hart box and putting their investment behind the Hyperstack? So I'm a bit hesitant to get too invested in the Hart. Although I said the same thing about Husky Connect and Husky Build Out, and a year later they are both still around !! 🤷‍♂

That's for adding your experience with Husky. It definitely seems to be the best bang for your buck. I hope they continue to introduce more accessories and more boxes :)

Yup, it sure does!! I just did a video where I did exactly that. Walked into a store, purchased two items, then returned one of them a few days later: ruclips.net/video/D-6Vk0hX0yo/видео.html

On the 1/2 drive sockets, you get both the 11/16 and 3/4. You also get a 7/8 socket for the 1/2 drive. Yeah, the wrench selection in this kit is a bit lacking.

Interesting ... OK, I'll have to play around with the different combinations for next time. I haven't seen a really good BOGO deal lately, but hoping some will drop soon ... not that I need any more tools, but I can't pass up a good deal !!! lol

@@kintsugimoto I should have added that the Cordless Hammer Drill and Impact Driver regular price was $399 and when you selected that with the inflator it dropped the price on both products. The Cordless Hammer Drill and Impact Driver dropped to $275.43 and the inflator to $123.57

It feels a bit weird to film inside the store ... all the associates come by and wonder what you're doing !!! LOL I measured it when I got home. Interior Dimensions are approximately: - Top Drawer: 11 in x 15.5 in x 3.5 in - Bottom Drawer: 11 in x 15.5 in x 7 in

Hahahaha, yeah they differ in value by about $100,000 but otherwise pretty much the same!! lol

It's mostly for the sound ... you get more of a deeper burble with the Japanifold :) Some say that it increase performance as the opening for the exhaust port is wider to help the gases exit faster, but for everyday driving, you probably won't notice any difference.

@kintsugimoto Thank you so much 👍

@@MB1Billion You're very welcome ... Happy Holidays !!!

Oh that's no good. I had that happen to me, but when I turned the faucet all the open that problem went away. At first I thought it was because I was using Milwakee M18 batteries with an adapter, so I wonder what is causing that problem for you? 🤔

Oh, I always thought that’s what these styles were called. So what’s the proper term for these?

Good to hear that it loosens up after a "break-in" period. Wow, that's amazing that you're able just use this set for collision work ... seems like you would need a 3/8 or 1/2 set !!! lol

Oh man, I'm so jealous !!! Yeah, I'd feel like a baller too if I had one !!! lol Enjoy it !!!

As I've done more research, it seems like most of these different systems are being made by Keter. But there does seem to be more innovation to the design and functionality of newer boxes. And I think competition and innovation will continue, but whether that creates downward pressure on prices is yet to be deteremined :) Thanks for watching and commenting!!!

True, but by replacing that part ... the error code went away :)

It says the weight limit is 50 lbs, so that should be enough to hold a socket set. This Husky Build-Out Mechanic Set with Trays: homedepot.sjv.io/DKPkgj comes in at 32-33 lbs.

Yeah, same!! I'll keep checking and I'll post here once something gets announced.

@@kintsugimoto they’re officially out! 3 drawer: $40 dolly: $25

​ @ChrisBranleh Thanks for the heads up !!! Just put my order in !!! I was actually just checking last night and didn't see them up yet!! lol

@@kintsugimoto sweet looking forward to a video on it and hoping to see capacity within drawers. debating whether to grab these budget drawers or to shell out some extra cash for the husky build out since they have more options and both are reasonably priced

@@ChrisBranleh I think it depends on what you'll be using it for. The budget version is probably good enough for me - I'm just a home DIY'er so these will probably just stay in my garage. That being said, the Husky Build Out isn't much more expensive, but the build quality seems much better. You could order some discounted HD gift cards to sort of brut force a discount :)

It's not too bad once you figure out where everything needs to go, but it's hard to see what you are doing and some of it will need to go by feel. Good Luck !!!

Hmmm, that's interesting, I'll have to go back and try it.

WOW !!! That's a great deal ... and it's compatible with the Bauer boxes from Harbor Freight

Sure, let me see what I can do. Might need to give me a few weeks to get around to it. I just checked Home Depot's website and they don't have the 3 box set available at a store near me, and at $140 on sale, it would be the most expensive set :)

@@kintsugimoto thanks for the reply and ok awesome. Yeah that's what I paid for mine too. I'll keep and eye out on the video. Keep up the good work 💪

Yeah, that was a good deal. But I'm wondering if Craftsman is going to discontinue the Tradestack? The HyperStack from Walmart seems like they have a lot of accessories coming up for it. But I agree, the quality isn't the best, but good enough for this DIY'er :)