Видео

The @USCCA has these handy color-codes to help you understand your state of situational awareness. In Focus Level White, you are completely unaware of your surroundings. Don’t spend your time outside the house in this state. Know what’s happening around you. In Focus Level Yellow, you are a casual observer, aware of your surroundings. I advise all of you to maintain this a minimum when outside your home. In Focus Level Orange, you have identified potential threats, and are in a heightened level of awareness. At this point, you should be considering potential ways to avoid, de-escalation, and/or engage and neutralize the threat. In Focus Level Red, you have verified the threat and are now putting your plans (all the stuff you thought about in Level Orange) into action. At all times maintain situational awareness, and disengage as soon as the threat is no longer present and imminent. Check your surroundings for additional threats. There may be more than one. Visit A2 Defense Training to learn how to defend yourself at home or outside. #USCCA #SituationalAwareness #SelfDefenseTraining #HomeDefense #PersonalSafety #FirearmTraining #GunSafety #ConcealedCarry #CCW #FirearmsInstructor #StayAlert #BePrepared #SafetyFirst #ThreatAwareness #DefensiveMindset #TacticalTraining #SituationalPreparedness #SurvivalSkills #A2DefenseTraining #DefendYourself #ProtectYourHome #StaySafeWithA2Defense #SelfDefenseTips #SecondAmendment #Pro2A #ArmedPreparedness #ResponsibleGunOwner #LawfulCarry #DefenseEducation

so you just swapped slides and put the same fcu in the grip module

Thanks. I just the macro. I figured it was like you showed but it was nice to get confirmation. Sig didn’t put it in the manual.

is it legal to remove the disconnect in ca?

On a Striker fired gun I like to discharge the weapon while empty and this stops you from doing that. Don't like.

@ the negative comments lol.. if you regret buying different modules, it is your fault. i think having a few different "models" on standby is pretty neat. i purchased the Xmacro grip and Spectre slide and love them. will be assembling them this weekend. but also like that i can drop the trigger back into the micro and have that for a backup carry if i so desire.

Love your videos Can you post a video about cleaning Glock 17?

In theory this is a VERY easy process to remove the mag disconnect. However in my case it was a CLASSIC case of a 10 minute operation turning into a 60 minute ordeal....My theory is that my FCU is slightly different in my California xmacro than your California p365. At 6:37 in the video, I believe this is a takedown safety lever, not the trigger bar (according to diagrams I have seen). Any way when you rotate what I believe is the safety lever pin, I had to pull mine out much further than you did which caused my Safety Lever to fall out (which of course I did not realize until I completed the entire process and then saw this random spare part on my work bench). I believe I let out an audible "well shit". I then had to pull out the safety lever pin and try to thread that pin through the hole of the safety lever. This took quite a long time. Once I was finally able to do this, I felt a huge sigh of relief. However I then noticed that I could not turn the takedown lever. The takedown safety lever was jammed because my safety lever pin was upside down. So of course I had to gently pull out the safety lever pin, rotate it, and push it back in....well guess what happened, the safety lever fell out again. I then spent what felt like an eternity trying to get the safety lever back into the FCU and thread the safety lever pin through the lever. Well I finally got it back in. I thought I was in the home stretch. The take down lever was installed properly, take down safety lever was installed properly, safety lever pin was installed properly. All there was to do was reinstall the FCU safety. Well at 13:25 when he says "thank God I didnt lose that"....Well wouldn't you know it, guess what happened to me? When I was pushing the pin in and rotating the safety to get the pin seeded in the notch, I lost focus and moved my punch tool. The pin then SHOT across my office. My office has carpet. I LITERALLY had to find the needle in the haystack. At this point I was frustrated, covered in sweat, and pretty pissed off at myself. But I know based on my past if I didnt give up and searched my entire office that I would find it. I looked around my office for about 20 minutes. I used a magnet and hovered it over the carpet in hopes the strong magnetic forces would pick up the pin. But nothing happened. I then had a memory that my dog was laying down in the direction in which the pin had shot out. So in the words of Mr. Ollivander from Harry Potter, I said "I Wonder..." My dog had then moved from the floor to the couch in my office. I ran my magnet over my dogs fur and guess what? A small black pin shot out of her coat and onto my magnet. Well the story is happy from here. I installed the safety, moved my FCU to a mischief machine commander series grip module and took my gun to the range. If you're reading this and are great at taking things apart and rebuilding them like I am, DO NOT RUSH THE PROCESS (it's always easier to rebuild something if you have all the parts). Take your time, take deep breaths, and don't make as many mistakes as I did.

If I want to remove the manual safety as well as remove the mag disconnect . Could I just follow the steps in the video and just not attach the safety back in? I know it’s probably common sense but just want to make sure. Thanks for the video!

Thank you sir, very helpful for a newbie like me

Great video! Wish we could see you and demonstrations better. The circle is very very tiny.

Does removal allow the install of aftermarket triggers?

Thank you !

what size punch is needed?

Total cost....now that the xmacro comped is out for $849.00

You would’ve been better to just get another SIG at this point, or if you weren’t happy with the feel of the P365 micro then sell it towards the MACRO model. I have the Micro and like the option to have both Macro and Micro P365.

Just purchased and can't wait for 10 days... Thank you for the video!!!

He put the spring in wrong. The painted end of the spring goes on first.

7:50 will this work on x macro? I was trying to tilt the thing up but it doesnt let me, even tried using needle nose plyers but it would let me go even a quarter the way you got it, any tips?

It seems to me it would be much easier to move to a free state and purchase the P365 XMACRO of your choice.

I passed my FSC today, thanks to your video. Thank you for taking the time to create this video.

Great help. Thanks bro

Dude, how can you spout all this misinformation? At 14:25 in your video you say it is now California compliant! WRONG! You have no chamber indicator or magazine disconnect installed!!!!! You may talk about how to make those right, but you don't show it and more importantly if someone builds this and uses their gun in a shooting or if they carry using a CCW, and shoot it or God forbid kill a POS, they will be put in jail and probably loose every cent they earned in their life (due to civil law suits) because you told them they now have a CA compliant gun. They Don't! take this video down or change the video please. There is plenty of people who are trying to carry and do so legally. This type of stuff just make it so much harder for law abiding citizens to understand how to carry legally in the communist state of California.

U could have just gotten the ramjet afterburner comp set up from Radian

Did the Spectre Comp slide come with the barrel?

Hi A2 Firearms well I took the test today I watched and studied your content and passed the test it took me about 8 minutes total to take the test thank you so much for helping all of us with your phenomenal video 😀👍

Was nervous about the test and found this video watched the full thing and was confident taking my test 1hr later and passed with 0 misses on my test, TY A2 Firearms!

Hi A2 Firearms just wondering are all the test questions you went through on the actual test ? if so I guess I could just memorize them and take the test please let me know thanks in advance ☺️ 👍

You don't run a brush down the barrel? I always clean the inside of my barrel when I clean my guns.

Great info! I did exactly like you showed and...almost nailed it! My slide release lever somehow came off during the surgery. After a moment of panic, I found that the little spring that was then visible needed to be on top of the lever to retain it. With a little bit of maneuvering, I got it back onto the lever and we're good to go.

Just save money and buy a p365x. Have a very good conceal and a bigger version for whatever

Terrible video! A two minute Job took a 16 minute boring video!!!!

Thought I would “upgrade” my standard P365 to a P365x. Bought a WC XL grip on sale and found a True Precision optics-ready slide at a good price. Slide didn’t come with sights or pats, so added $100 parts kit, $140 barrel, $40 guide rod/spring, and $110 sights. With just those parts, I was already $250 over the price of a new P365 X, which would have come with a FCU, mags, and a case. One of the dumbest things I’ve ever done in terms of pistol upgrades.

Must have missed the barrel swap, are you running the same one from the p365 on the macro? Great video 🤙🏻

A 10rd Xmacro instead of 17rds? You might as well stick with an XL if you can't take advantage of the extra rounds due to CA compliance, but what a waste

3 minutes in and looks like you're still trying to convince yourself a round didn't magically hop back into that chamber.

This is clutch,

There’s a X Macro Comp Ca compliant on the Sig website…. Noticed it last night.

What’s the estimated rounds fired before u replaced spring.

Dude. Move. Your state sucks.

Thanks. Excellent demo.

you dont have to buy the p365xl slide. just buy the XMACRO lower, and cut about half an inch at the end and you will have an XMACRO with the short slide of the p365/p365x as seen in this video ruclips.net/video/yh43BWFGZlc/видео.html

thank you not sure why other videos are 8 to 10 minutes long for this

I’m sorry but you basically bought a new gun

watched this before switching my p365ca curve to flat trigger. it went well, and it's a nice upgrade

Awesome video! Using this to take my test tomorrow

You can use the XMacro mags in any of the smaller frames

Is part list available?

Hey Man, I have a 229-Pro. Do you know of anyone that makes an extended take down lever for this pistol? I really need something to rest my thumb on. Other than that, I love the gun. Thanks!!

Great adding to this p365 video series! Please describe the Magwell installation too. Thanks!