Видео

Just make sure the O-ring is not pinched and blow out the vent tube and should be ok hope this helps

Thanks a lot Bud it’s really appreciated!!!

No problem glad it helped you out and appreciate the positive feedback have a great holiday and be safe on the trails!!!

@ Merry Christmas to you and your family and all the best in 2025.

Not sure of the size but it’s not the smallest it like the second size from the smaller size hope this helps

Once a year if you are hard on your stuff every 2 years if you are a little bit hard and if you just trail and only used one or two times a month just check it to make sure you level are good and look in your manual and check what mileage you need to change it ! Hope this helps and thanks for watching!

@Can-AmX3Dude I don't have a manual. I am not hard on it as I drive it in eco mode, but we go long distance. A few weeks ago 500 miles in 3 days. It was getting 22 mpg!

@canolando3499 if you got it used I would charge it just to do preventive maintenance

No I have never seen it leaking and don’t think it would be crack not old enough

Sorry no I don’t!

Sorry if I forgot to put the specs appreciate you watching !

Thanks Bud appreciate the positive energy! Be safe out riding, hope to here from you again!

I got the icebreaker heater so I’m all good 👍 thanks for watching it greatly appreciated!

@Can-AmX3Dude nice 👍, Love x3 videos so keep um coming 😁👍

Thanks Dude, didn’t think anyone was paying attention, it’s greatly appreciated that someone cares if I upload new content, will have more coming soon and be safe out riding!

I have not had any issues with my code-shooter to answer your question, thanks for your question

Thanks Bud that is very greatly appreciated and thanks again for watching my video, be safe out there riding!

Yes it is, has not move a bit and the tape is not coming off and I see the top of it from my deck so I keep checking it all the time !

@Can-AmX3Dude thanks for the reply! Is it true that the invisible trailer function does not work when the camera is mounted on the roof? Thanks!

@Imago1Dei the invisible trailer function works great it’s makes the trailer look like you are hauling a flat bed trailer

I’m having good results testing new belts now that is not yet on the market , but have only had the best results in the last 4 years with G Boost World Best Belt and have destroyed 3 Can-Am belts , haven’t blown a G Boost one yet!

Yes it’s a app on your and it a OBD tool as well and thanks for your positive feedback!

Good morning i was trying to locate the app which i found maptuner but it doesnt have the can am maverick on it, would you be kind enough to share the name of the one you are using please and thank you

@PierreJean-z1g it is the Code Shooter for EVO and you need to buy the code shooter from evo and the plugin for the unit you are using and you plug it in then you turn power on without starting and then you turn on the app it will find the code shooter and then you can get diagnostics or tuning or check boost and other things, hope this helps, but the tool I used for my turbo problem was a boost leakage from my intercooler and I used the KWI boost tester kit got a video on that tool, if you got more questions feel free to ask!

@@Can-AmX3Dude thank you so much for all the info and will deffinatly whatch the video on it Thanks again and much appreciated👌

@@PierreJean-z1g no problem, glad you enjoyed it and thanks again for watching my videos!!!

Just got my answer on one of your other videos.

Go with the gmc/Chevy dealership had cover, I show the name in my order video and have no complaints or leaks! And thanks for watching its greatly appreciated

No problem glad to hear that my video can help you make a decision that make a difference for you!

Perfect have had no problem at all , thanks for watching Bud!

Ya Bud bring the Cup back to Canada, and ya love this X3 build XMR/XCR/XDS and with the tracks and plow it’s really a all in one SXS and love it in the winter, hunting, plowing with heated cab, I don’t regret nothing!!

Thanks for leaving a comment, can’t put a rad relocation because I got full cab in closed for winter tracks, so that is not an option for me, and for the Leafs question, I’m a leafs fan for life from the start of my life since when I was playing hockey as a 4 years old kid in Tim Horton arena in Cochrane his we Tim is from, Go Leafs Go!!!

Cool Dude hope you have fun!!

@@roco1890 ya I don’t put my mic on my neck no more pics up everything too much.

Ya don’t used my wireless mic no more clip to my shirt.

Thanks appreciate the positive feedback have a great weekend!

If you are talking about the ones that clipped on the 2 sides of the windshield on to the rôle cage there is none you only get it with the windshield and even if you try to get your dealer to do a special order, they won’t give it to you , I hope you didn’t break one ore loose one, your out of luck, the only thing you can do is get a machine shop to make you one custom, sorry, but I did all the steps that I just told you for another viewer

@@aaronstokes2883 greatly appreciate your positive feedback regarding my video and thanks again for taking the time to do so, have a wonderful weekend and be a Safe out there riding!

Ya sorry to hear that, don’t have any issues with that, but hopefully you can find and fix the problem soon, please let me know what you find and what you did to fix.

@@richardaristeo8394 it must not be seated properly or you didn’t put the gasket or the clamp is not tight enough

Go to the 7 minutes and 32 seconds and you will see that the step are higher then the frame of the pickup and what they look like under

Glad to hear that my video helped you out and in joy , it a really great midsize pickup truck!

Thanks for sharing your feedback it greatly appreciated

Appreciate your positive feedback, thanks again!

Yeah but I find looking at someone else’s making mistakes helps me not to do the same mistakes and showing step by step how to do it and knowing what to do or at less not what to do is a good thing and love the way you commented it made me laugh 😆 thanks for watching and make sure your X3 is in Park !

@@Can-AmX3Dude I do appreciate people like you making the effort that will save me a few hassles. Well done mate.

@tonyp2865 No Problem appreciate the positive feedback Dude

@@Can-AmX3Dude I'm was just about to send you a massage. I just fitted mine, which took half an hour thanks to your tutorial. 👏

@tonyp2865 happy to help

Just make sure that cage is clean before you install the windshield and the make sure you are using the right side for the sliding clips and just place them with the locking mechanism towards the inside and slide them downwards until they lock in to place you can look closely on them they have markings were they should be, hope this helps

Not on cage ... the window mounts...I had to recruit my daughter and a friend to knock them back onto windshield..used alittle of windex and a lot of work but got it done...windsheild is now on can am ...thanks

@srasmussen3217 they can be a bit hard sometimes

You need to replace the flap for the turbo I assume it the flap at the hot side !

@@JM-dy9mx the Mud Bog clutch Kit from GBoost has springs for secondary without the insert that you choose a hole 🕳️ # 1 to 4, I was wondering that too but it works great 👍 and no belt slipping so i never question it more and there is other company for drag racing X3 that are set up the same way but I’m glad you ask thanks again for watching and appreciate the comment!

@@bhouse4322 Ya Man !!! Thanks for the Comment!!!

You are welcome and greatly appreciate the compliment thanks and be safe out on the trails

Thanks appreciate the positive feedback have a good one Dude

The only 2 things I suggest are the 1st thing I show you in my video one you can get at any auto store and the other from your Can-Am dealer make sure you put on latex gloves 🧤 because you will have dark stains on your hands 🙌 for a week 😆 hope this helps

@@clachale2000 Gratcie me amigo

Yes it the same on all 4 corners my friend!

It is the same on all 4 corners!

@@Can-AmX3Dude I have a lot of people say not to grease them. It can cause more harm than good. So I guess I don’t know what to do. I’m trying to do preventative maintenance to make stuff last. Advice? I have a 22 Maverick sport max 1000r 4-seater.

@@GallagherRC I had to replace the 2 rear bearing in less the 1 year I think it was even less then 10 months and the I greased the 2 new rears and the 2 front so that was in 2020 I got a 2019 X3 like you know and haven’t changed a wheel bearing since it’s 2024, 4 years later, and that is no bs, just use high quality grease for one and you should be ahead of the game, if your X3 is 6 to 10 months old and your greasing them now and they do fail, was not because you grease them, you greased them too late, don’t know why someone would say that greasing them would cause more damage, everything that rotates metal on metal needs lubrication if it’s not oil it’s grease!!! Hope this clears your decision, please let me know what you decide, I’m curious 🧐 have a great day and be safe on the trails

@@Can-AmX3Dude a lot of people have said on forums when I asked about greasing them, that you have to be careful because if you put too much grease, you’ll blow the seals they can fail prematurely, that they do not need much grease and they are filled to spec at factory, etc. I have 1200 miles on my machine. I just changed all the fluids. I just wanted to do everything I could prevent a maintenance wise. I have lithium grease was going to use on them. I’m waiting on the tool to arrive in the mail. I can’t see why putting a few pumps in each one would bother anything?

I say the name right at the start of the video, and show the part number as well, hope this helps

Thanks

No not yet and haven’t got any more slack since, so I hope it will lasts a long time ! And that’s for watching

@@StarknightMT_official Yes I’m interested do you want to do a collaboration?

@@Can-AmX3Dude Yes, please let us know your con tact info

@@StarknightMT_official please contact me by email at canamx3dude@gmail.com

@@LuisPerez-vy6bz no it hasn’t done anything yet, sorry to hear about that, hope it’s not something common!

@@Can-AmX3Dude thanks and I’ve come across several post with that issue. Just thought I ask.

@@LuisPerez-vy6bz thanks for the info!

Got the shim kit from the Dealer it’s a BRP part

No but it was supposed to, so I asked my dealer and the change to black free of charge, the only thing is the spare supposed to math and they want me to pay cost price to get it black, that I’m not happy about!!!