Видео

Eu tenho uma gravel bike com câmbio traseiro GRX 400 10 velocidades e cassete 11-36 dentes, que é o máximo indicado pela Shimano. Eu gostaria de instalar um cassete 11-42 dentes. Será possível? Muito obrigado.

actually you can go to a 38 without a link if it's GRX, problem with a 40 or 42 is that the B screw does not sit flush with the RD.

Thanks 💪💪🚲🚲🖐🖐

Hell yeah man, 55 years old you look much younger. Benefits of physical activity!

Thanks a lot, 3 years later, I'm with your digital help, to change my 11-28 cassette with a 11-40, so that I cann climb small mountains 😅

Very helpful! Would a GRX-RX812 also work out? Better than a RX810? Thanks man!

Thank you for the very informative video ! I would like to do the same thing on my bike which has a shimano 105 50/34 at the front , and grx 810 with a 11-34 cassette at the back. Just wondering if I have to change the chain, or if the one I have with the 11-34 would work. Do you have any idea ?

Nice video. I’m about to jump to 11-42 cassette too. Do you have to put a 1.85mm spacer before you fit the 11-40 cassette? Thanks

Subscribed, I watched the installation video you made, it's a great info, I was worrying I'll purchase too large cog for my stock derailleur. With the hanger extender, I can go up to 40T.. thanks a lot. More power !

With a 50-34 in the front you could just have changed the smaller chainring to a 32, shimano says their derailleurs only work with 16 teeth difference but its actually 18, its the same with their non shadow rear derailleurs saying their max cog is 36 but its actually 42

'got 11-40 cassette with 44/24, 9 speed

I like the video. I’m looking to put a 11-40 cassette on my 2x GRX400 drivetrain. Wanted to go 1x but like you I don’t want to blow my knees out.

Music to my ear. I've just purchased a Cannondale Slate with stock Ultegra rear derailluer. I picked up a GRX810 for $60, so will be slapping on a 11-40 cassette!!!

Any ever remember seeing a pond back in that area? Somewhere right off blackhorse gap rd

thank you for sharing..this will be a big help to me on my set up

If you go across the creek and go right on the path there is a deep swimming hole that’s about 4-5 feet deep

What tool are you using to clamp your cut mark on the fork

Want to upgrade cassette on a Trek Checkpoint ALR4 2021. Presently using Shimano Tiagra HG500, 11-34, 10 speed. Can I upgrade to 11-40, 10 speed? Also my Crank is GRX RX600, 46/30 170mm length. Should crank be upgraded to accommodate 11-40 cassette?

great video Papa D 👍

Now I can see a bright future in front of me as the 56 yo Cyclist that I am. Soon I will be chrisfrooming up the hills like a goat.

Very helpful. I'm currently riding a 11-28 cassette with a medium length rear derailleur. An 11-30 cassette would help me enormously, an 11-32/34 would be a dream. Thanks mate.

Did you have to add a 1.8mm spacer? Ive heard that mrb cassettes are shorter than road cassettes.. edit. Just read the last comment.

I just saw your video. Did you use the same bearing or crown from judy to the fox?

Bought my first Gravel Bike 2 weeks ago. Checkpoint driftless and it‘s awesome. I didn‘t own a bike for 29 years and now I can‘t go off from it.

👏👏👏, thank you.

i picked up a used '18 Roscoe 8 a few months ago, and this week got a '21 140mm Fox 34 Factory for it. Looking forward to getting it on the bike this weekend.

Just got the 2023. thanks for the video

Hi there. Did you install a spacer on the freehub when fitting the cassette?

fucking wicked ride bro

Hi dad pov🫡 can you help me? Help me!! Which gearbox model did you mount? Medium cage or long cage? Thank you so much

Hi dad pov🫡 can you help me? Help me!! Which gearbox model did you mount? Medium cage or long cage? Thank you so much

i tried to look up the chainstay length of your bike which seems to be 425, i have a 2022 giant tcr advanced 2 disc, which has the same 105 50/34 and 11/34 setup but with a 405 chainstay length, would i need to use a shorter chain than yours? this is my first road bike, used to ride a flatbar gravel bike which had a 46/30 crank and a 11-36 cassette, kinda miss the 0.83 gear ratio during climbs.

Good to know!

My 105 "decent" road bike has the 50/34 x 11-34 combo with GS mech, I've also got an older Tiagra 4600 specced bike which I'm planning to convert to "mountain" spec- It's 50/34 x 12-36 at the moment but looking into an FSA Tempo 46/30 crankset and an 11-40 cassette as the "old" M592 SGS can take 45T capacity so no issues over slack chain, though for all I'm ever in the highest gear I could just go 11-42 and adjust the high screw so the 13T is the limit.... Bike manufacturers really need to wake up and listen to what the public need, seems every road and gravel bike I see is hideously overgeared never mind carrying any bikepacking kit as an extra!! The folk that are happy with close ratios and 25/28T low gears usually live where it's flat..I'm in the Scottish Highlands and would take lower gears any day than stupid huge downhill gears!!

I've been looking at this one, and it looks like most of your cons have been fixed in the updated model.

Are you using a medium or long range derailleur

Hi Did you leave the 1.8mm spacer on the hub before you fitted the cassette?

Nice, I have the same specs on my Crux with a short cage I want to change to a 40 like you. Question why didn't you go with a long rear derailer ?

How good is 11x42 teeta cassette?

What size crankset?

At first that was working fine; but a few months later it's gone crazy. I changed the shifting cable and checked other points; but it's not fixed yet. I guess the derailleur itself must be broken! In your case, is it still working fine? I think I should change the derailleur to GRX one (RD-RX812).

How many links did you end up taking off the 116 link chain ?

Hi Papa D! I am fitting in an 11-42 cassette on my Checkpoint. I have a 52/36 crank. I was able to set-up the 52 crank and 42 cassette but having trouble with 36 crank and 42 cassette. The chain slacks off. Is there a way I can fix this? I used a Deore M4120 SGS RD with Tanpan. Thank you!

Useful video. So on the chain that you have, did you get exactly 114 links when your chain was already installed? Thanks!

What brand and # for the tool that removes the cassette ?

Hello, I bought a trek checkpoint alr 5 2023 and as I can see you changed your discs. I’d like to exchange them too. Is that posible? And, do you think this is just an aesthetic change or something else changes • My discs are Shimano SM-RT70, centerlock, 160mm. And I’d like to exchange them for SHIMANO Ultegra R8000 do you think is that possible?

Great informative flick , Im gonna try the setup myself . But with GRX 1x11 derailur bolted on a 50/34 105 rings with 11/42 in the back to see how it goes , Cheers

Hi. I tried installing 11/50 tooth cassette to my 2x setup and it is rubbing the cassette to my derauleurs. Im using shimano 105 medium cage. My previous setup is 11/37 by 2x. I saw this video of yours and its very interesting. Will this work?

a triple chain ring on the front does the same thing-easier to adjust

Thanks for this and the previous installation video. I have a 2020 SL5 checkpoint with the RD7000 GS derailleur and I changed my 11-34 spd 105 cassette for a Shimano SLX 11 spd 11-40 cassette no problem. I wasn't sure about the spacer but my original cassette had a 2 mm spacer behind it and I left it in place for the new one. The 11-40 cassette lined up perfectly with my derailleur, I only needed to adjust the b screw completely inwards to give me 5 mm spacing between the guide pulley and the 40t sprocket (while in the smallest chainring). I can shift to large-large and small-small no problem, though both combos rub the front derailleur. Now I can climb those steep inclines a little easier!