Peace In the Valley
Peace In the Valley
  • Видео 216
  • Просмотров 710 372
Update on the Valley - E171
Over the past few years, our property has undergone some major changes. It’s hard to believe how different it looks now compared to even a year ago. Let’s take a look at some images from 2023 and now in 2024. The landscape has completely transformed, and we’re excited to share it with you.
We bought this property back in early 2021, and there have been quite a few changes over the past 3 and a half years.
We’ll start with how it looks today!
If you’ve been following our channel, you know that our biggest challenge has been beavers. They’ve been quite aggressive in their attempts to dam up the entire area.
Today, most of the water is gone, and the land is back to its natural state - valley gra...
Просмотров: 821

Видео

Cookin' in the Valley
Просмотров 1052 месяца назад
It's cold/freezin' fog. Angel is up cooking on the stove outside!
Great Trip to North Carolina
Просмотров 4172 месяца назад
We had a hugely successful trip delivering water, food and supplies to North Carolina this last weekend. Thursday we started collecting food from the Antwerp Community in conjunction with Lake James Christian Camp. They had all their trailers full and we ended up filling this flatbed too! It was only possibly because of all of you who thought to give so much! Thank you! We drive through the Gre...
WE DID IT! - E170
Просмотров 3143 месяца назад
We only have 2 days to do this! We have to deliver our fifth wheel down to southern Kentucky, set it up and head back home! Can we do this in time? We leave after work on Friday and want to get to Corbin yet tonight while pulling this monstrosity. We bought this 2001 RV in February (or March) 2023 after visiting the RV Show and saw how expensive RV’s can be! When we pulled it from Toledo we got...
RV Awning build
Просмотров 1845 месяцев назад
The concrete piers are hard! let's start building the RV Shelter Awning!
Stage 2: Pouring concrete E168
Просмотров 2755 месяцев назад
What a beautiful morning! It’s time to pour the concrete in stage 2 of our RV Shelter. This will be come the awning. It takes a big of prep time, but it’s all coming together! Join us! Let me know what we could do to do this better. Take care and God Bless!
Finishing up Stage 1 RV Shelter
Просмотров 7985 месяцев назад
We are here to finish the first part of the the building that will house our fifth Wheel. We got back in Kentucky. Joel and I found Carpenter Bees have made their way into the structure of the wood, and it’s only been up for a month! What is going on? Can we overcome these and still stay on time? Let me know what we could do to do this better. Take care and God Bless!
WOW! A Copperhead comes to visit! E166
Просмотров 7325 месяцев назад
Much of the country deals with snakes. It's only a few areas that do not have venomous snakes. We found one and scared us like crazy! Great to be back in Kentucky on this nature hike!!
Cordless tool Rack solves A second problem - E164
Просмотров 3938 месяцев назад
Cordless tool Rack solves A second problem - E164
Nature Walk with Angel - E163
Просмотров 1058 месяцев назад
Nature Walk with Angel - E163
Day 4 & 5 - Getting the roof on! - E162
Просмотров 4858 месяцев назад
Day 4 & 5 - Getting the roof on! - E162
Day 2 - Truss Falls and BREAKS! Also Purlins - E161
Просмотров 3578 месяцев назад
Day 2 - Truss Falls and BREAKS! Also Purlins - E161
FINALLY - Post Setup on the RV Shelter - E 160
Просмотров 1,7 тыс.9 месяцев назад
FINALLY - Post Setup on the RV Shelter - E 160
The Truck Breaks Down on i75 - E159
Просмотров 3839 месяцев назад
The Truck Breaks Down on i75 - E159
Pouring Piers for the RV Shelter Part 3 E158
Просмотров 2879 месяцев назад
Pouring Piers for the RV Shelter Part 3 E158
Moving On Part 2 - E157
Просмотров 4959 месяцев назад
Moving On Part 2 - E157
IT'S TIME TO MOVE ON
Просмотров 33810 месяцев назад
IT'S TIME TO MOVE ON
Why Didn’t I do this Earlier? - E155
Просмотров 43610 месяцев назад
Why Didn’t I do this Earlier? - E155
RV Flooring Install? YES YOU CAN! - E154
Просмотров 89811 месяцев назад
RV Flooring Install? YES YOU CAN! - E154
Starting to tile in the Valley with the RK25 - E153
Просмотров 33411 месяцев назад
Starting to tile in the Valley with the RK25 - E153
10 dollar Truss boom Lifts House Trusses #shorts
Просмотров 578Год назад
10 dollar Truss boom Lifts House Trusses #shorts
DeWalt vs Hercules Circular Saw Exhaustive Comparison - E152
Просмотров 19 тыс.Год назад
DeWalt vs Hercules Circular Saw Exhaustive Comparison - E152
Drive and Danger! - E151
Просмотров 468Год назад
Drive and Danger! - E151
Angel: The Gatekeeper - E150
Просмотров 324Год назад
Angel: The Gatekeeper - E150
Beaver Dam update
Просмотров 144Год назад
Beaver Dam update
RV Slideout Floor Remove, repair, and replace - E148
Просмотров 21 тыс.Год назад
RV Slideout Floor Remove, repair, and replace - E148
Boy needs a tractor
Просмотров 175Год назад
Boy needs a tractor
Angel makes a friend
Просмотров 117Год назад
Angel makes a friend
Pat’s Or Not with your backhoe…That is the Question - E147
Просмотров 359Год назад
Pat’s Or Not with your backhoe…That is the Question - E147
Magical Forest - E146
Просмотров 82Год назад
Magical Forest - E146

Комментарии

  • @21DaHoagie12
    @21DaHoagie12 3 дня назад

    I’ve been using more and more of Hercules tools since buying their very impressive impact gun for work this year. I purchased the circular saw and sawzall to build a few new work benches and with an 8ah battery they performed very well. For the price I’m hard pressed to justify buying other brands. Though I still do love my older Dewalt and Milwaukee tools in the garage at home. 👍

    • @PeaceIntheValley
      @PeaceIntheValley 3 дня назад

      I've been on that same path. I recenlty purchased the Hercules cordless miter saw - It is incredible along with the stand ruclips.net/user/shortsp-sII7ZmI2Y?feature=share

  • @brycesteiner5423
    @brycesteiner5423 6 дней назад

    There should be battery adapters like this for ever device or they should all interchange.

  • @joshuahaviland8025
    @joshuahaviland8025 12 дней назад

    Im gonna try using it in a plastic gun stock to stiffen it up on the foreend and buttock

  • @user-mq9qh4sn6h
    @user-mq9qh4sn6h 12 дней назад

    Please post name and part number, thank you

    • @PeaceIntheValley
      @PeaceIntheValley 6 дней назад

      It's in the video description: Here is the 50 amp waterproof switch we got from Amazon: www.amazon.com/dp/B088ZH8LHN?psc=1&ref=ppx_yo2ov_dt_b_product_details

  • @steveg7000
    @steveg7000 14 дней назад

    There really is no contention here. The Hercules is a budget, bang-for-buck product while Dewalt offers a premium professional tool. A circ saw is a pretty straightforward device so there aren't subtle features to consider. Use the Dewalt as a beater take it to places where you don't trust conditions or people. Loan it to friends when they come mooching on your tools.

  • @p.e.8149
    @p.e.8149 14 дней назад

    The stump cut would be fairer if one wasn't 3 times the voltage/power. 60v vs 20v????

  • @jimivey6462
    @jimivey6462 15 дней назад

    I went into Home Depot one time and purchased something from a discount display. At the cash register, it came up full price. I got a manager, and the manager said since the display had not been taken down, the store would honor the reduced price. It always pays to check with the manager.

  • @jrac863
    @jrac863 15 дней назад

    we have the same saw and the hercules blade right out of the box is junk.Put a real blade on there and you will see the difference especially when u are cutting that stump.Your comparing apples to oranges 60v vs 20v.

  • @ZainAlec
    @ZainAlec 17 дней назад

    I see someone else has a talent with handling fire.

  • @Christ-has-Risen.
    @Christ-has-Risen. 17 дней назад

    Bro 60Volt vs 20volt hahaha not fair

  • @timyarbro4783
    @timyarbro4783 26 дней назад

    The new version of the Flexvolt saw does have a rafter hook and a lot more power without a doubt. Great video and thanks for the details.

    • @timyarbro4783
      @timyarbro4783 26 дней назад

      I have the left and right side version of the Flexvolt saws and the power is unstoppable. I also have the 20 volt version of the DeWalt and it cuts great also but as far a production and speed Flexvolt can't be beat. I really would have liked to see a video of the 20 volt DeWalt vs the Hercules for a more fair comparison. Again you pretty much covered everything except that you wouldn't have to buy any batteries if you would have just bought the DeWalt 20 volt.

    • @PeaceIntheValley
      @PeaceIntheValley 26 дней назад

      @@timyarbro4783 I would like to see that video too! I would be they would be similar in power. I've had a problem with the FlexVolt batteries dying. My fourth one is ready to bite the dust. It's the electronics and not the internal batteries themselves that seem to be failing.

  • @mikenollan5747
    @mikenollan5747 Месяц назад

    When rinsing mine off? I've never seen worms come shooting out of the grass so fast! 😅

  • @jeffyoung1361
    @jeffyoung1361 Месяц назад

    I've learned to get out the corded worm drive the next time I do something silly. As silly as watching this video for as long as I did. But thumbs up for the effort, guy.

  • @howdeedoodee6603
    @howdeedoodee6603 Месяц назад

    Sorry. I see nothin in progress

  • @deanbarr5740
    @deanbarr5740 Месяц назад

    Beautiful, looks like you got em EVICTED Bryce. Them varmits caused you plenty grief. Good job my friend.

  • @williamwelling4872
    @williamwelling4872 Месяц назад

    Great place for a garden

  • @timburlingame2343
    @timburlingame2343 Месяц назад

    Comparing a 60v saw to a 20v saws power is like Comparing a 360v 3 phase table saw to a 120v single phase table saw of course its going to have more. power other than that great review.

    • @viniciusluciano1424
      @viniciusluciano1424 Месяц назад

      Exactly, this 60v saw is the most powerful we have on the market, and you put a 12 ah battery, and it doesn't overheat other brands like milwaukee, bosch if you do the same they overheat 😅Makita 36v I've used it a lot and also it didn't overheat but eka is weaker than dewalt, but it's cheaper 😅

  • @stacyhackney6100
    @stacyhackney6100 Месяц назад

    Thx u

  • @terrymartin741
    @terrymartin741 Месяц назад

    If it won't start when warm it could be the cutter clutch needs adjustment. A common problem.

  • @berndeikers8924
    @berndeikers8924 Месяц назад

    hi brice, thx for this video. very intensive. but what i miss was about dust removal, is there any futures for this on the saws?

  • @kellywolfe507
    @kellywolfe507 Месяц назад

    Awesome review. Being female I probably have a slightly different take on the difference between the two. On the farm I do all kinds of woodwork including felling and milling trees, framing, carpentry, and more. For me the weight of the DeWalt would be a big minus even though its more powerful. The power doesn't help me if I'm worn out from the heavier weight and have to quit for the day. By far the accuracy for me is a huge plus. The markings as well. If I can't make out what I'm setting it at its useless. I'll be waiting until Black Friday deals probably but thank you for doing this.

  • @user-mm4je1sb9b
    @user-mm4je1sb9b Месяц назад

    Nice and easy

  • @TheCritterWindow
    @TheCritterWindow Месяц назад

    After I twisted my paint stirer into a pretzel I husk them first less mess. I cut that off and welded a heavy wire brush to the end. Nice clean nuts. The greener the easier to crack and get a fairly clean nut.

  • @MW-jj1rn
    @MW-jj1rn Месяц назад

    Nice work, I have a 2020 330RL and the crappy plastic mesh has torn where the wheels roll along the floor surface. It’s a design flaw. Thank you for sharing this! I’m going to try and replicate your idea. I’d use the wheels to support the weight. What a PIA!

  • @anonperson4597
    @anonperson4597 Месяц назад

    The ladies were probably digging trillium. What time of year was it? In some states it’s illegal. Just a wildflower but endangered. I’ve seen people digging in our national forest. It’s an arrestable offense with a steep fine in Alabama.

  • @deadaxman
    @deadaxman 2 месяца назад

    Well done man, probably cleaner than the factory gets em!

  • @j.d.f20
    @j.d.f20 2 месяца назад

    Pile them in driveway- drive over them. Put in 5gal buckets and use a power washer 2-3 times to rinse & clean them. I have one tree that will fill a 55 gallon drum with walnuts each year. BTW- WEAR GLOVES! Floating walnuts are duds. Dry for 2 months in a cool, well ventilated place. Soak for 3 days before cracking.

  • @jnickolson15
    @jnickolson15 2 месяца назад

    The guy that designed the dewalt now designes the hercules from harbor freight they are basically the same

  • @BillErnst-kp5qq
    @BillErnst-kp5qq 2 месяца назад

    Be more fair on the test get a 20 amp DeWalt and then retest them you can't come up with a fair test when one is a 20 amp and the other is a 60 amp

  • @loveofchrist5808
    @loveofchrist5808 2 месяца назад

    Who is ever watching this video please do not take this guy’s advice and override all the safety features that a lawn Moore is produced whip they are there for a purpose so don’t be the one going into the emergency room trying to sue the company just because you rigged something for safety please people be smart on what you’re doing because remember you have one body and one life just imagine if it was your son or daughter or wife might get hurt on this equipment that you rigged. Jesus Christ of Nazareth please help people understand if they can’t fix it take it to a professional that knows what they’re doing not to an Individual that’s just changing the system around that’s what you call is a shade tree mechanic somethings always shady about their work.✝️✝️✝️🙏🏻🇺🇸

  • @martincano9264
    @martincano9264 2 месяца назад

    You are awesome man! This got me up and going again

  • @lexi-conby
    @lexi-conby 2 месяца назад

    I can sympathize. If the sign is still up, stores should honor the sale and she should have at least say let me talk to the manager

  • @Noslime
    @Noslime 2 месяца назад

    The only Dewalt tool that I have ever had any luck with was the 7.4 V screwdriver. I have had hammer drills and saws and they’ve all been crap. I don’t know what I’m doing wrong.

  • @Sobergirl_
    @Sobergirl_ 2 месяца назад

    10:21 I just hiked to this place through the lookout point trail at Cumberland Falls yesterday. It was real cool. It’s sucks that people graffiti it.

  • @angelsteiner6756
    @angelsteiner6756 2 месяца назад

    Such a touching story of community helping community

  • @deanbarr5740
    @deanbarr5740 2 месяца назад

    That is so awesome Bryce. God is so Good. Thank you Sir.

  • @sharidenis3890
    @sharidenis3890 2 месяца назад

    How has it held up?

    • @PeaceIntheValley
      @PeaceIntheValley 2 месяца назад

      It has held up just fine. There is cracks on the edges where the new mix was real thin.

  • @w7jhb
    @w7jhb 2 месяца назад

    Excellent project. I'm just learning how to weld (self-taught from YT videos) and I think this is going to be my first "real" welding project after I finish with my practice pieces. I have the TYM T25 tractor which, I believe, is the same as your RK. How do you know what angle to put between the hole for the pin that holds the conduit into the pipe and the "sticks" (bits of the sign stand) that you welded onto the conduit? You obviously don't want them sticking straight up (vertical) or straight out (horizontal). I would think 45 degrees would be too much as well. Yours look like they are perfectly aligned with the bow of the coroplast. It seems like maybe the best plan is to not drill the hole in the conduit until after you install the "sticks" and put the coroplast on it. Let it find it's own position, then mark and drill the conduit.

  • @Fearose
    @Fearose 2 месяца назад

    better to do this before building it, and dont do this with partical board

  • @Tusk2001
    @Tusk2001 2 месяца назад

    I have the hercules. I use it on the job for portabilityband work at odd angles.. when i am cutting thicker or haerd woods i use corded

  • @jennifermillette9674
    @jennifermillette9674 2 месяца назад

    What type of L is that?

    • @PeaceIntheValley
      @PeaceIntheValley 2 месяца назад

      The aluminum? I think it's 2"x1/8" thick. The RV is 300 miles away right now but I believe that is correct.

  • @Matias-v3w
    @Matias-v3w 3 месяца назад

    My shits made from steel

  • @guitarguy3221
    @guitarguy3221 3 месяца назад

    That was incredible the likes of Endgame thank you lol. Had a nasty truck bed dent for 6 months

  • @rustbeltgypsy3713
    @rustbeltgypsy3713 3 месяца назад

    You need to check your breathing issues...why do you stop breathing and then start gasping like your mouth breathing carbon monoxide?

  • @vigilantobserver8389
    @vigilantobserver8389 3 месяца назад

    This also makes the wood water resistant.

  • @Jkkmoeder
    @Jkkmoeder 3 месяца назад

    I wood ☝️👀

  • @jaywade1118
    @jaywade1118 3 месяца назад

    What does it do to the painted surface on that metal roof?

  • @rickvalcarcel8888
    @rickvalcarcel8888 3 месяца назад

    Read the label,watch videos....he spent a ton of time when you could just use an overlay

  • @rickvalcarcel8888
    @rickvalcarcel8888 3 месяца назад

    He has so many cracks it woukd cost him a who bunch of money,a.d NEVER USE TOUR HANDS TO TROWEL IT

  • @rickvalcarcel8888
    @rickvalcarcel8888 3 месяца назад

    Do not do a job like this without research!!!!...the rockite is expensive.....look around alternative crack repairs for large jobs...im using rockite tomorrow on a job...its been chased,blown,powerwased.....