Видео

Sweet I'm glad it worked for you too!

@@MakeItSohey bro question what was the paint code to that grey you did on the bezel?

@@miguelvelez4494 oof I'm not sure. I don't think I have the can anymore sorry. But after I shot this video I ended up painting it the same black as the dash. I didn't like the Silver after all.

Not entirely sure. I usually play with the controls for games as-is. Lookup how to open the retroarch menu, I know you can set it up in there.

The marquee lights up. I do want to put some grilles over the speakers.

Hey there! Thanks for watching. I have two videos that should answer your question. ruclips.net/video/UyHwYoXOwhA/видео.html ruclips.net/video/4uH8sB6mvEU/видео.html

I'm not sure about that. This is a Y1 cable B series transmission.

amzn.to/3TLMbHk I use one similar to this

@@MakeItSo Thanks!

The converter is by a company called Retrotink. I'm pretty sure this system is reteoarch based but you can check the Rgb-pi wiki for more info.

@@MakeItSo Thanks for the info!

Thanks! Appreciate it!

Yep! Stock AC still fits exactly where it should.

@@MakeItSo right on brother

Yeah, it definitely triggers some memories.

I don't think I'll have time to make a video specific to that but there's probably several if you search on youtube for that subject.

I purchased a full suspension kit from Energy Suspension. In my case the rear disc conversion didn't change any of my bushing needs. I have lots of bushings I didn't use in the end, but some of those are for if you're replacing bushing on the factory shocks and things like that. I have coilovers so I didn't use them. But I think it's still worth it to get the kit if you want to do everything.

I followed this guide. Exceptional amount of information here. retromash.com/2016/05/01/building-a-home-arcade-machine-part-7-cabinet-plans/

Thanks for watching!

They were an impulse buy when I first got the car two years ago so I figured I'd use them. I didn't do a good job of showing it off but the stock fenders have a bunch of dings, dents, and deep scratches. I figured this would save me some time, since I already had them sitting around.

@@MakeItSo I see, thank you! Fantastic content as always

Thanks for watching!

Nice! Thanks for watching as always!

I guess it depends on the condition of the metal. I hit them with some PB Blaster then with the impact gun and they popped right off. When I did the same on my CRX I stripped one and ended up welding a metal bar to the head of one to be able to get it out. They are super frustrating.

I haven't come across that one yet in my collection but I'll keep an eye out for it.

For building the VTEC waiting harness? I go over it in it's own video. Most of the info I used for this swap came from here. honda-tech.com/forums/honda-crx-ef-civic-1988-1991-3/b16a-crx-swap-guide-1193782/

Thank you. Glad you enjoyed it!

Thanks for watching. I hope it was helpful.

I believe these are the ones I have but double check the fitment for your specific application. Seems like the price has gone up since I purchased mine. hasportperformance.com/products/egstk-mount-kit/

@@MakeItSo thank you!

@@robotstampede No prob!

Thanks for the advice! Today I learned what a shrinking disc is.

Yes 100%. I also have black door cards from a 1995 Civic Si, and I'll probably pull the light blue headliner and paint it black as well. Thanks for watching!

@@MakeItSo awesome! I have a 94 si and I want to black out the rest of the interior that is painted grey like the front pillars/rear and the headliner 🤓.

Cool thanks for the info. I'll try some solder first!

Thanks for watching. Yeah, I hope to get back into it as soon as possible.

I know, I couldn't believe it.

Tell me about it!

I can hear each one of them perfectly in my head.

Good luck!

Nice, Garage kept? I think the sun is the worst enemy of these older Honda's.

@@MakeItSo yes

Haha I don't know about less stressful. Good luck with your swap! Send me some pics when it's ready.

One of the best!

Thanks for watching!

It's the Adam Sandler effect. I would argue that Wedding Singer is his best film. For me it's just a matter of when it came out and how I first watched it. For me VHS tends to be 80's and very early 90's stuff. Sandler is on the cusp of DVD.

Maybe! I've basically turned my home office into a video rental store at this point.

Haha, just biding my time till I get to work on my cars again.

He rides neck and neck with the dirt bikes. We beat him uphill, but he smokes us downhill.

That's a great memory, thanks for sharing.

www.ebay.com/itm/266744173091?itmmeta=01J04THEPWG9QZGDW6NHEZPZGE&hash=item3e1b311223:g:AsMAAOSwjyZmB1ip Check this out. This guy started making them out of Lazer cut aluminum, they come with 3M adhesive backing too. If I was to do it again I would use these.

I think I needed about 3 cans for 4 wheels. But I had 4 cans so I used them.

I don't have any VHS tapes with those intros but I'll be on the lookout. Thanks for watching!

I've been using this stuff for trailing arms and subframe stuff. Just let it cure for a few days if you can wait and it'll be good to go. www.amazon.com/dp/B000PIK1YC?ref=nb_sb_ss_w_as-reorder_k0_1_16&amp=&crid=3G94TNGG6ILP3&sprefix=rustoleum%2Benamel&th=1

Glad I could help, best of luck!

I think the crankshaft sensors on these motors are actually a signal that comes from the distributor. I never took apart the bottom end on this motor so I don't have experience with the crankshaft bolt.

@@MakeItSo when you took off the pulley, which way does that nut turn to come off?

@@Iseekoutthetruth Lefty loosey, just like all the others.

@@MakeItSo ok thanks.

Yes it is. Thanks for watching!

Check out my other video for Part 2. I only pull the logos from VHS tapes I actually own but FHE is definitely in there. Part 3 coming soon.

Great suggestion!

I can't really tell a difference between 240p and 480i since I haven't compared them directly. The biggest difference here is the RGB output from the Pi to the Component input of the TV which makes the image much sharper and clearer and the native scanlines of the TV much more pronounced than if you were using Composite input.