Видео

I put 460 calipers/disks on my 470, works great, stops way better.

Thanks showing me how to do this bro. Appreciate it!

Does any company make a complete steel braided brake line kit for first gen sequoia’s ? And I’m talking even the brake hoses that go over the rear diff.

So I used 2010-2014 4Runner front brakes on my 2004 4Runner. Definitely bigger rotors! Can’t use 2015 and up calipers because the mounting bolts are bigger. Only 2010-2014 are direct bolt on calipers! ✌️

Ise proper measurements. Use mm

Is it true this only works on 17" wheels and not the 16" wheels?

I did this upgrade on my 1g tundra and my brake pedal became spongy. I was told i need the t100 brake booster and master cylinder?

Yes, too confusing on passenger/driver side. Talked too fast and too long.

How much does it cost to do the swap?

Hey bro I got a 2018 and my u joints are sealed however I noticed on my carreier bearing mount the bolts are positioned super far forward (toward engine not differential) I unbolted and reboltes same issue to the point I had to leverage the mount to get the bolts through. Thoughts? Thinking axle wrap

Dealer said: Those ujoints aren't serviceable. Me: Follow me. (Points around the rear tire where you can see the zerk fitting on the rear ujoint) Then I guess some prankster glued zerks on all the ujoints on this truck? Dealer: ...oh....wow... Me: Yeah. So let's get 'em greased up.

How did you get the cruise control to work? Did you end up jumping the wires at the park/nuetral safety switch plug? Any help would be much appreciated

How did were you able to keep the cruise control? What wires did you jump at the Park/Nuetral safety switch?

I have a second gen 4.0 should I weld my front diff as it disconnects from the rf cv axle

Yota. I have a 2004 Corolla. I was Loosing oil. Had valve cover replaced. Didn't solve issue. I do believe I have a problem with the piston ring maybe stuck, or the little drain holes could be clogged. The car runs excellent. I am not a mechanic! Can I try an engine flush. And maybe use Yamalube ring free for awhile, or liquid molley valve clean added to the gas tank? I have 218, thousand miles. I have a limited income. Can't afford to buy another car. Trying to get some more use out of it. I did subscribe! Thanks for any advice brother. Note car still runs excellent!

Seems to me the flange is installed and thightened crushing the crush sleeve and until you get resistance on the flange. Then you back off the nut. To the desired backlast. However, by reading the marks on the ring tells me the pinion needs to move away from the ring. I can't. Its already rubbing on the case. The pinion that is. So it's gotta come back off and a shim will be added. And by doing this, I'll need to center the gear contact using the adjuster nuts. Right??

What is that distance between the bearings supposed to be?

I bought my sequoia from someone that didn’t do their driveline service routinely so now I’m stuck with a bad ujoint. How hard are these things to replace, Yota Guy? I do my own oil, brakes and suspension. I have basic handtools, impact gun, 3 1/2 ton floorjack. Any other tools needed to do this job? Or should I just take it into a shop?

Need to do both diff drop and bushing with anything over 2in lift. The the drop help with your cv boot wear.

Nice looking kit, but how is it wired? does the instructions show the electrical details?. I'm not an electrical engineer.

Just bought a tundra 2020 and I really don’t like the a/c blower, is kind os soft, everything is clean the truck has only 39k miles on it, can I replace the motor blower for a string one ?? Please help me ! I live in Texas and the Summers are very hot!!!!

Thank you! Saved me a few hrs ...

Why do you do the second part of cleaning the vents by turning the AC off??

Bro pretty much said driver said every time he meant passenger, and visa versa 😂😂 so fcking confusing

Thank you!!!!

Awesome thanks!!! I have a 2020 tundra. Would this same procedure work?

Do you have any idea how to do this for Toyota Camry 07-12?

You need change the engine computer and the wiring harness for make that swap?

Amazing tutorial, im looking to get a sequoia soon and you made this look a lot easier then it sounds

Do you have a parts list.

Great work man

Where can I find the stand to hold the 3rd members?

Thank you some great info

thanks

thankyou so much ! About to try and wire up my new Cobra CB !

What is the backlash setting you used for this setup?

So - did it work? 2001 access cab here . . . hoping this worked!

Well I see that this can be done for a 3rd gen 4Runner but what for the rear is there any recommendations for an upgrade conversion ???

Do you have a parts list by chance

I know it's a lot to ask, but would you be able to list all the hardware sizes (tools and tool sizes) needed to do the job? And about how long did it take to disassemble and reassemble everything?

Just today I ran a pair of wires through the cable grommet (passenger side in my case). I hadn't seen your video until later. What I ended up doing, and it was pretty easy to do, was pop the grommet out (easier on the passenger side) an inch or so and then I carefully punctured a hole in the grommet just above where the normal cable bundle runs through, being careful to not stab the cable bundle of course. I was then able feed a number 12 piece of solid strand wire through the hole and grab it from inside. I then taped a pair of smaller wires to the larger, #12 wire, similar to what you did with the screwdriver, and was able to pull a pair of wires from the outside to the inside with ease. Anyway, just another way of doing it. Thanks for sharing your video! - Jim

Where did you get that green switch panel

what would happen if you stick with the automatuc ecu?

Did you have to pull the motor to change the harness?

are 86 to 95 transmission the seme as the 96 to 04 transmission?

I just checked the driveshaft on my 2010 Tundra to grease it but there are no zerk fittings visible. Where the zero fittings are supposed to be there are covers. Am I supposed to remove those covers to expose the zero fittings?

Would this clear 05 Sequoia limited OEM wheels? 17″ diameter, 7.5″ width

Ok ! Show me plz what u did ! Plz More info ?

Jeff, where are you? Looking to do this to my 99ltd 4runner

Thanks! Makes things much easier...