Видео

@@sixnine6996idol …TY the last time it out was the most fun I EVER had with it! The following time I took it out after that was the worst lol but I didn’t load that one but I’ll show the damage. Thinking of either doing a new build with this chassis with the new Porsche body, but I’ve been open to suggestions.

@@scottm2398 …. 😁 that’s exactly what you get out of it.

If you could have a cage for another type of car, what car would you want to have with the cage.

Never needed one until driving with high grip. I bought a pair of velocity fans but never installed them but after what happened last month in when I did the Sarasota video, I pushed both my RC harder than ever before because of all the girls that were there watching. That’s what happens when you get a crowd am I right lol?

@@toysforboysrc 😂😂😎

Xcs6 pulls car look it up it’s a real thing.

Thanks I had fun making it! I met Devin Davis through a FB group he’s a really cool guy I wish I could meet for ppl like that in person. He told me all about his vision for this cage and concept for years before it came to reality by total chain of events, wild stories. I would LOVE to get to open up my cars on those salt flats I’m a little jelly 😆 but I totally think this cage is the peanut butter🤪😋.. my Skyline Build gave me 20+ videos I can only imagine what I could do with this cage! I want one so it’s a matter of time.

Nothing stopped you lol, you didn’t get to see this one in person

😄thx

I feel so bad for the times everyone has asked about the Skyline light buckets because they were hand made with building materials. Someone just recently asked about the same thing but I always do my best to post the product links in the comment section and or description section. However I DOOO have a good resin printer and complete station but I have not been able to set it up and “learn” CAD profile bcs of the current space available 😞 but we are trying to move to a bigger house 🥳 so I am trying. I still have the stencils and I want to build more skyline so that will happen soon as well. If I’m not mistaken, I made a video where I showed and shared my stencils for the headlight buckets. It’s in the Skyline Playlist. Crap I lied I didn’t… it was on the ARRMA forum while looking for someone who was willing to print them but it didn’t happen.

@@toysforboysrc Hey thanks for replying. I know you've probably gotten that question about a millions times. I'm always late to the party when it comes to media and YT. Sorry about that. If you find out where that video is that shows your stencils, I'd be happy to put them together in Blender and return the file to you. Not sure why no one has done that yet, but I've looked HIGH AND LOW across the web for an STL file for side mirrors, light buckets and windshield wipers for the Protoform Skyline Gt-R 34 body for the ARRRM Infraction.....Sadly, no one has made these yet. I'm probably going to find some other parts for different models that will look good, and just play with the sizes until I get a good print that fits. If I do that, I'll send you the saved STL file of the good print.

@@toysforboysrc Also! Good luck on the move!

That would be great news thanks for that😎 currently waiting to see if someone im talking to will get them done BUT I got something you’re gonna love.. his name is Devin Davis and he made a roll cage that bolts to the 1/7 chassis and is specifically designed to fit the skyline body like a glove. He also printed headlights and tail lights that install onto the roll cage so there’s no wires to the body. Here’s his FB. facebook.com/devin.davis.1291?mibextid=LQQJ4d

ruclips.net/video/2ii-mKR0vdU/видео.htmlsi=EQ8IzICAFfXssN6W watch this video it’s the best I can tell you for now.

🙏🙏 thank you for liking those lights🫡 I love them too! Even in the Sarasota video I just uploaded, everybody was complimenting the lights even tho they aren’t all RC enthusiasts. I made those from scratch and I shared all my product links with all the parts I used video by video. It was expended PVC foam board 1/8” thick and the lights are all over eBay and Amazon. They are automotive 12-14v led lights. For trailers, bikes, trucks exc.. the lights are cheap so in a pack you get 5 pairs 10 count… be sure you look at them closely and pick out the best for your rc. The wires are going to be very crappy but they have not failed. People also used those same led for the Felony and infraction bcs it’s easy to do just drill holes.. there will be two sizes, I got the smaller ones bcs of heat and voltage requirements.

a.co/d/cN39Tkt

a.co/d/bMzemXh

@@toysforboysrc can you send me the link where you got yours bc I have the same r34 body

Already did

Btw the burn smoke smell was coming from a piece of clear tape that was stuck to the motor

Hi Mitch 🫡🫡🫡😁😁 always nice to hear from you! I found a piece of clear tape that I used to block debris from going into the motor vent.. it’s been there since day one, never smelled… at the club sight the motor never passed 140°F but it was a nonstop run.. once home I found the tape partially melted and definitely stunk of smoke. To be honest that a good outcome lol. Seems to be due to the time duration of being at 140°F

TY

I actually took this one and another rc to Sarasota on a business trip and I beat the SNOT out of both cars at an intersection next to a pub that was jumping. The skyline was in mint condition before all this but I ripped them hard for 3 nights in a row!🫠 and melted the wheel off the skyline!! I’ll be doing an update video of this awesome tiny town and the rc’s very soon😎😎

Yessss sir🤙

Hi, it’s complicated… I “meant” to order it with an 8mm shaft but accidentally ordered one with a 5mm shaft. When I realized it several hours later I called to modify my order to an 8mm but it had already shipped, so before it arrived we already had the return/exchange lined up before I even made the video. Of course I was eager to see it in person bcs I never owned a TP before. I like to scrutinize things that’s just me, so I could not resist making the video bcs eeeeevery body has a TP but I NEVER heard or seen anyone talk about what I was looking at and it started a storm of ppl worrying😒but half said that it will brake in after a while and to be honest I never seen or heard of a failure from this clearance stuff, but this topic could go on for ever🤷‍♂️.. anyway I continued to proceed with the return and when the identical motor but with the 8mm shaft arrived, it also had a super fine clearance and spun better but at that point I realized that that’s just how TP motors are and I stopped worrying about it so I didn’t mention anything to not sound like a Karen lmao or like the picky guy that I am, but that pays off with clients as I’m a perfectionist. I never ever had any problems with my 4070 2200kv 8mm TP motor, but I truly got worried during that initial first unboxing ever. Tip…. I also noticed that although I bought it from (island hobby 🫶#1) I also did research on the actual TP motor website and I found a section that said if there is a factory defect, it must be sent to TP motors them selves for inspection.. so I was partially worried that I would have to deal with TP instead of Island Nut because TP doesn’t even talk to their customers which is why I went with Island Nut to begin with. I’ve had other customer needs with Island nut concerning more future purchases from them and the owner IZZY is a SUPER awesome guy. So after getting to know the staff, they really treat you good!

.. it was pretty eventful trying out a new TP motor for the first time after only having known what a 1717/1650kv is like.

4070 2200kv if I’m not mistaken. It went into the Skyline build. Playlist has about 20 vids.

I heard that the following model has compatible parts but idk past that. Proline usually makes replacement parts. I had a very hard time finding a small metal part for the steering block and had to invent something bcs the following model changed to pillow balls for the steering block. It’s basically a classic imo I keep mine put away mostly.

Don’t they take for ever and have no customer support??

@@toysforboysrc not really took about a week for me to get mine. Customers service I can’t really speak on never had to call them

Apexi II air flow converter. Stock ecu

@toysforboysrc I have a safc neo on my 03' b15 spec V. I'm getting a turbo kit I wanted to ask how's reliable has that's been for you? For turbo applications

@@dennisg3693 ….. I just recently traded the car for something else. I had it about 7 yrs reliable. The only thing I’ll say is that what ever you have your boost psi at is the boost psi that you’ll get across the rpm range and throttle body position range AKA gas pedal. This is unless you have a separate boost controller to make sure you don’t build too much boost too early. I did not have a boost controller, I only had a manual $30 boost adjuster valve. So I would not try to build boost past 0 psi until I at least hit 3000 rpm where it’s safe and will not lug the turbo. Still with trust in mind, you don’t want to go WOT on your turbo and Apexi controller until 3500-4000 rpm AND I would also not attempt WOT tuning until you’ve had the turbo build and Apexi long enough. One you get the hand of the apexi, you’ll learn the hi-low throttle tables and the hi-low fuel tables that correspond. At that point you’ll want a good AFR gauge and you will want to go to your “monitors” on apexi and choose the throttle percentage graph and two other graphs that you will need to monitor while doing a pull. Because this apexi does not log data like other more capable ecu, you will need to have those graphs I’m telling you about displayed on the apexi screen and your friend will need to record the apexi as it displays values and you while driving looking at your AFR gauge. You can also have the AFR next to the apexi where both of you see it but mostly so that you can record the live AFR with the live apexi values as to actually record live data logging. I got my shit running goooood.

@@dennisg3693 …. So with all that said… if you hit knock, detonation, pre ignition, you’ll have it recorded and with the ADDED BENEFIT OF AUDIO you can see and hear what’s happening and you can make changes as needed…. What changes you ask.., that natural comes after getting your car running first and driving it easy while learning the Apexi. My advice to you is to get ONE STEP COLDER on your spark plugs and close the gap to 0.25 and up to 0.30 MAX! This will prevent the spark plug from being blown out like a candle under high boost and it will ALSO prevent knock and pre ignition under high boost and high engine temps. The one “slight” downside is that the engine will take longer to warm up and you get cool pop and crackle sounds on every cold start.

@@dennisg3693 …. But dont expect to make boost with this 1step cold plug before your motor oil reaches 180°f

Oh boy here come the trolls no matter what the situation😆

Just having some fun with stuff laying around. There’s plenty Bluetooth devices for helmets .

Thanks kiddo…. Complete video coming out soon, it’s just getting the final touches. I promise every one I’ll try make a better rc car buy you’ll have to the viewers choose which car car looks best 🏎️💨🏆

Watch the following videos posted after this one.. the limitless and the Felony use two different size motor plates for running different size pinions. This information is not found easily at the time of this video. Therefore I made a very in depth video with product links and upclose comparison. It’s the 45min special video, it’s a good vid.

How much mph you get out of that with timing? I’m running a mx8 now on both my cars.

Had to the a brake with all the holiday travels and some personal time but I’m back to the channel 🫡. Thx!, what is your speed run PB right now?

@@toysforboysrc copy that buddy same here! Nice to take a break now and then! Still the same 165 8$ but hopefully that changes this season🙏 You did a really nice job on that Bugatti man! Awesome work again buddy and great to see ya back!

…. Well these bodies are not lexan. They are PETG which is kind of less flexible and are on the brittle side meaning it will crack on impact as to lexan will bend and deform. It’s a new company so perhaps the PETG was a cost effective decision, they also do not come with the peel-off protection film for the painting process. You might of already had a smalllll little crack or accidental cut at the wheel well from when trimming. Torsion to the plastic from using scissors can do this. I always use blades for the wheel well portion and I did a video with the skyline on it. In the Bugatti Series I also did a segment on the wheel well and how it cracked on me and how I went about it. Mannnn sorry about the parking lot incident., I don’t mind helping you at all via email be it but if you don’t mind talking on here I’m all for it. In the future others will also inquire about PL bodies and project mods and at least our history will be on here and it’ll save me the hassle of sharing the same information again. I would have never anticipated that damage from a parking lot., Whether it hit something or not, RC car bodies are meant to, and should be able to withstand the driving conditions of a seven scale RC car. I would at least expect to hit a wall or flip it over doing 50 miles an hour to get a crack on it. When my rear tire blew out on the skyline, doing my very first speed run with grippers, which I regret not using GRP’s, it did rip off the paint, but it didn’t even crack the body and that skyline body is half a millimeter thinner than the performance limitless bodies so I do hope if they continue making bodies that performance limitless will consider using Lexan for their future RC car bodies. I have never done a live video chat or however that works but I think it would also be cool because we can exchange information a lot faster and the video would be doing a service to the RC community and it would probably be a video that is much needed since there is not a lot of material about performance limitless on the Internet. I am a couple weeks away from releasing another update on my Bugatti Bolide build.

My communications with you have motivated me to pick up where I left off on the Bugatti build and I am literally doing that right now, so thanks for that 😎👌🫵

@toysforboysrc sorry it took so long to get back I have been working alot lately. Yes I would definitely be open to doing a live video, I have never done one before but it sounds pretty cool.. I ordered some spaz stix blue chrome and white gold chrome to paint my lambo body in. I didn't realize those body's didn't have a over spray protection on them.. my Ford gt body came black and the Lamborghini is clear.

I used a 3M liquid mask for the outside.. I just happen to have it bcs that’s my profession in the autobody field. I’ll see what it takes to do the vid thing, it might just have to be a personal vid call thing and then I’ll post it, or I can go live and we can talk on the comments as I shoe the build.

… uh man my bad idk BUT… I DID share the product links in almost every video. I tried to not leave anything out but I’ve bought from some eBay brand stuff, I bought castle and I’ve bought MOSTLY from omg I can’t remember 😣 but it’s a very common source for spurs as they are basically over sized pinions. Btw… the issue in this video was that the LIMITLESS uses a different size motor plate than the FELONY!!!….. sooo….. I had to buy the Felony motor plate and it let me use the two gears in the video. I made a following video that went into GREAT details on this and MANY other parts that were installed in that same video. It’s the 45min special video. One of my personal favorite videos I ever made. EDIT: SAGA GEARS!

Hey buddy THANKS 🙏🙏🫶🫶

It’s all there in the comment sections of the videos. It’ll be an eBay link., there are 7v ones and there are 12v ones.

Only the link to the PVC plastic, the glue and the LED for the headlights are there … I was asking about the yellow fog lights … you didn’t put a link for those

Ahhhhh disregard friend … I found it … it was in the older video you posted

I checked the comments in the video but I still haven’t found what you used for the fogs … sorry … I know I’m probably being a pest lol

@@stevenyoung8060 …. Hey how are you🙂 no problem at all and sorry for the delay. Let me find the purchase history and come back with the link in a moment