Видео

I'm a huge military aviation nerd. Aviation in general really. Definately made my day as you can see by my reaction 😆 🤣

Yes! We would've been mist and bits before we ever heard the chopper!

Thanks! I don't have the brake set when jacking it up so the wheels can roll forward and not pull on the jack. Then once lifted, the brake is set.

😆 🤣 😂

It's a cool, "scare the shit out of you", though!

I've hat the o-rings stick to the housing on a couple occasions. That is why I always mention that you should check the filter housing for a stuck o-ring. I've never heard about the old vs new oil. What about the old oil causes the o-ring to stick? I would think if you change fluids regularly, the oil properties are still all good in the used oil, especially when running synthetic.

Yes! Pretty crazy how sneaky a giant helicopter can be.

You were probably driving on I90, near Vantage, on a Wednesday! The Whidbey Island boys go out there and run maneuvers every week!

It is part of the Starlink app.

@@schmitty750 copy that

Well, that has to be one of the nicest moments I've every had! Thanks for watching and I appreciate you taking the time to leave a nice comment.

Thank you very much for the nice comments. I'm always trying to find some sort of intro/outro music that is not extremely annoying. Not an easy task.

They would turn that baby into a future Apache pilot!

CPG sits in the front seat. Pilot in the rear. But as long as the 30mm isn’t tracking, you’re good.

The pilot sits in the back seat, the front seat is the co-pilot/gunner.

I'm pretty sure they were using us for some entertaining practice!!

I kicked it!

Thanks!

Probably just take the deck boards off, add a runner on each outer edge and install wider deck boards.

Thank you for your response. I will definitely use your advice for the width of my deck!

I’ll be doing it my self soon only reason I took it in was because of warranty

I believe the hole is 1 1/8".

Thanks for the question, and thanks for watching the video. In the video, you can see I used an impact gun to remove the bolt for the blade at 2:36 . If you use an impact, you don't need to jam anything anywhere. Just like when you use an impact to take a wheel off, it doesn't spin the wheel even when off the ground. Same concept. You can also read other comments that nice people left asking about what impact I used as well. Thanks again for watching and leaving a comment.

I did not try that. Would it be more beneficial in some way? Let me know how it works!

@@schmitty750 not sure! I thought keeping the Starlink Router will allow monitoring the conection, obstrucion, etc. Is like that? Or you can also access de Starlink app with the Starlink router bypassed?

The starlink app works with the tp deco router. You can also monitor who is on the wifi, create visitor passwords that run slower speeds so they don't slow the primary cinnections.connections. You can see obstructions in the app as well.

Lol! Couldn't ask for a better comment!

Metric

That's great! Good thing they have the oil filter access panel now! That would not be a fun job with no access panel.

They played around and showed off for us for about 20 min! It was amazing!

I'm not sure you'd ever know it was there... but if you did see it before you turned to mist, you have poo on you just before you turn to mist 😆

@@schmitty750 exactly, its incredible how well they hide the noise until its upon you.

That would be amazing to see! Nothing like some good ol military aviation showing out!

I'm not really sure... I've never thought about it. I would think it would just drain what is in that water separator/ filter.

😆 🤣 😂 might have ended up touching the helicopter!

Thanks you so much. This was the first video that I talked to the camera.

If you cut the outer sleeve two inches and not the inner, the shaft will still only collapse to the original length but the outer sleeve is two inches shorter (inner is still original length so cannot collapse by two more inches). Vise versa, it's the same. Both tubes must be cut by 2 inches to be 2 inches shorter. This was probably not the best way to explain, but this is how my brain works I guess.

@@schmitty750 ahhh it finally clicked in my head. Thanks for explaining!

@@Failedmusician you got it!

Agreed 💯%!! 👍🏻

I'll let him know you said that 😆 🤣

He's a great puppy. He's turning out to be a really cool dog. Thanks for the comment!

Thank you so much for watching and commenting.

That fancy stuff is is the Starlink app.

8:17 I will explain how to connect to the primary deco and also add additional decos.

I would imagine it went very similar to that! That thing is relatively sneaky for a giant helicopter.

Thanks for watching!

Very nice! Thank you so much.

@@schmitty750 No! Thank you, it's a very nice review and walkthrough

Thank you so much. I hope it helped.

So great that the video helped... if at all 😆. I feel better now that someone has a z mower as dirty as I manage to get mine. Thanks for watching!

I have a new video out for changinging the front wheel bearings... mine went bad in a hurry 🤣 ruclips.net/video/lHnKCWeON4s/видео.htmlsi=S5n_-b51NJ9cCgOT

Damn right! 🇺🇸

Gotcha! Thanks for watching.