Видео

Thank you very much!!!

thank you, all day trying to remove mine, followed your video it was easy thank you very much

Brilliant!!

Thanks. This was really useful. Beko doesn't make the pump for my model so bought one for a similar model and fitted it. I had to plug up the hole for the drainage pipe though. Just another bodge it Brit.

Nice vid ...my brake light bulb holder has corroded its on a harness ...any ideas were to get harnes from with plug and 3 holders on ...cant seem to track any down ...👍

can i wire in a 3rd socket to the exisisting positive 12v feed to lighter?

Does anyone know how to remove the drain pump from a beko ws832425b there is no screws in front to remove panels to get to the drain pump and rest is welded metel at the front but can see the screws if looking from under the machine just can't get to them they covered with a metal panel that's non removable

Thank you! 💪🏻

big thanks for this. good help

Thanks, Marc! Had a blocked pump - couple of glasses/spectacles cleaning cloths bunging it up. Couldnt undo the cap, so had to take the entire pump off. You've saved me £150 by not getting a professional in. You're a star!!

The only bit I need to know you skip past. How on earth does that plug come out?

Thanks. Changed pump easily with this video

My old key is glued into the plastic fob and has no clip to lift up as shown in your video so there no way to get it out without cutting the fob. Then if I do that I am unsure if my key will have a hole in the end of it to enable it to be connected to the new fob.

Thanks mate. That helped me out.. 😃

քʀօʍօֆʍ 💘

Thanks mate, worked a treat!

My pump had no blockages but that thin black pipe was blocked solid with grit. Could that be why its not draining or do I need a new pump. Thank you

Well this vid popped up at just right time 👍🏻

Very straightforward, no hose in the front panel on my WM7032W.

how do i disconnect the connector??

I would have edited the part where you install the new seal onto the inner drum, Whoops !, But other than that nice job

Moan the bekos

Some machines will allow the seal to chnaged from the front. Its more complex, but, it can be done..

Great video mate. Am I right in thinking that for the rear pads ile need a piston wind back tool?

Your a god send mate thanks for the video 👍

Thanks alot for this video, so grateful.

Is it a 30pin or 40 pin connector ???

What is the price for that display cable?

I pulled the little black pipe out. Can I use a cable tie as don't know if the metal bit is in there

Was there not any 12v socket in there before then? There must have been surely

This video literally helped me successfully change my pump!! The screws are harder to find on newer models but thank u!

myy beko doesnt have the pull down thing at the front what can i try?

Should there be a ball in the black hose connecter to the pump?

I assume he had to take the top off so he can get the front off. plus the top and lower panels! Assume then that he could not get to the drum through the open top as some can without having to remove any of the front. Otherwise is a lengthy process as his was. The springs have a hook and eye. wonder if they can be released to save stretching the spring. What was appalling was the state of the powder drawer, full of muck. No wonder the seal cracked if like the drawer it was never cleaned!

Thanks a lot!! Life saver!

Real shame you didn’t show the fitting of the seal better, too quick and not clear.

Thanks, very helpful and well explained.

Thanks, thats realy helpfull. polish for ranges jak odkręcić pompe w pralce beko

Thanks a lot for this video. Saved me buying a new washer. Got a question if you can answer. My soap drawer a lot of the time leaks. I have tried everything from cleaning it, putting less powder in and even removing the top and checking if the pipes are blocked but nothing has sorted it. Any ideas? Thanks.

what is the 3rd cable on the existing lighter as like to have the usb port in the lighter location

Thanks. I will be doing this exact job on the same colour van on the same side on Saturday. How much did you pay for the lens and where from?