Saludos desde México buen hombre gracias me funciono ahora si podre descansar un rato dios lo bendiga ojalá asi fueran todas las personas y pudieran aportar algo
I learned something for the 23. Fasten seatbelt, u can be in or out😂. Out is preferred. Push in yellow break, then idle up to 2. Been on for a long time. Over an hour so far. But seat belt is key
Update: well all of the information you gave me was awesome, and I'm sure it works for a lot of people - but apparently I have the smartest Freightliner truck on the face of the Earth... You can't fool it with wheel chocks, and the idle/weight combo was figured out by this truck as well... So what I had to do, was adjust the weight on the gas pedal to trick the truck into believing there is a foot on the accelerator by balancing the weight on the accelerator... And the truck figured that out too.... 🤦🏽♂️ I'm doomed
clarence montgomery on mine I use @ 5 and 2.5 lb weight zip tied. Then it’s zip tied with a loop over the top. I use another sand bag at 2 lbs to keep it at above 1000 rpm. Usually at 1100 rpm. Sometimes it slips a bit in rpm and need second sand bag. So about 9.5 lbs of weight holding the pedal constant. With it hanging down. Metal weights not plastic. It works great. But vibration does sometimes makes the pedal rise and below 1000 rpm it shuts off.
I don't drive anymore, but when I was driving, I had a small 12v heater I was able to point at the outside temperature sensor. It would register like 110-120 degrees outside, and truck stayed running all night lol. Wish I knew this trick
Hey it worked. I didn't use the weight dumb bell. I used a shoe. Wedged it between the foot peddle and the bottom of the dash. It worked. Man thanks allot. Wasn't getting any sleep because of the heat. Now I'll be able to. God bless you
I tried this with my foot just to see if it would work. It did. Once you start the truck with the peddle down and hit Accel/res, after the rmps go up you can let go of the peddle and it will stay on 700 rmps.
The override button works on my 2016 cascadia II but doesn't work on other trucks in the same company.. Depressing the brake pedal also works on all 2014 to 2016s that I've been in. Thing is pressing something defeats the purpose of having it continue to run for HVAC while resting. Has anyone asked their company to disable the shut down or adjust the temperature settings? I'm soon going to bring it up to my company and if it's as simple as asking the temps to be adjusted... I'll let ya'll know!
I did it and but thiers an easier way do what he said but use your foot and bring it up to 700 n turn on cruze control n tap the acc/res button and it should go up to 8 or stabilize n u can remove ya foot it should stay reved up at u or 8 n it wont shut off
It works bro thanks alot... I was about to quit celadon cause I'm not freezing in this winter! I might still leave celadon... crappy company. Worse move as a driver so far by coming here!
you are the fucking man sir works like a charm i dont even have to push the resume button just hold the pedal down and start my truck an the rpm only goes to 6
I love you! I own the truck and want it to idle in the winter but need idle shutdown in the summer. You saved me a bunch of cash at the dealer! 2017 evo
Saludos desde México buen hombre gracias me funciono ahora si podre descansar un rato dios lo bendiga ojalá asi fueran todas las personas y pudieran aportar algo
❤
My boy... 👍💪💪💪
Man you just saved my live
bonehead trucker 😂
I learned something for the 23. Fasten seatbelt, u can be in or out😂. Out is preferred. Push in yellow break, then idle up to 2. Been on for a long time. Over an hour so far. But seat belt is key
Oh so sweet 😋
Didn’t work on my 2019
Lol, an option I guess 😆
Didn't work for me, 2018 Cascadia Schneider.
Amazing! This works!
Thanks partna. Worked!
2016 Freightliner Cascadia evolution. Nothing overriding idle shut down including this method. Truck shuts off at 3 minutes and 45 seconds.
Thank you so much
Thanks working so far
Does the cruise need to be on?
Ok so what is the point on the dumbbell when you can just use your foot 🤔
Mine shuts down between 20 degrees and 70 degrees. 71 degrees and above it'll run all night.
Worked perfectly
Thanks a ton!!!!
28 degrees outside and my truck won't stay running. Trying this out right now.
It’s going to drive you to your destination while you sleep
Why buy a dumbell? Just push the gas pedal down with your foot when you start it 😂😂😂
I got a 17 and so far it's working thanks. I've only been trying it the last 15 minutes but it's the first time it's run past 5 minutes.
Does NOT work , Tried everything, IT only works if you overide it at the dealer, Thats the only thing that works🤷♂️🤷♂️🤷♂️🤷♂️
Will it work on a 2019 for some reason does not have the opti idle option ? Have watched all the videos but does not have that option.
Ronnie kamper Not familiar with 2019’s
Update: well all of the information you gave me was awesome, and I'm sure it works for a lot of people - but apparently I have the smartest Freightliner truck on the face of the Earth... You can't fool it with wheel chocks, and the idle/weight combo was figured out by this truck as well... So what I had to do, was adjust the weight on the gas pedal to trick the truck into believing there is a foot on the accelerator by balancing the weight on the accelerator... And the truck figured that out too.... 🤦🏽♂️ I'm doomed
clarence montgomery on mine I use @ 5 and 2.5 lb weight zip tied. Then it’s zip tied with a loop over the top. I use another sand bag at 2 lbs to keep it at above 1000 rpm. Usually at 1100 rpm. Sometimes it slips a bit in rpm and need second sand bag. So about 9.5 lbs of weight holding the pedal constant. With it hanging down. Metal weights not plastic. It works great. But vibration does sometimes makes the pedal rise and below 1000 rpm it shuts off.
Awesome, great info because my APU is TRASH!!!! 😩😩😩😩😩😩😩
Awesome video, Short to the point
Patched
Watch "Keep truck running all night all day" on RUclips ruclips.net/video/ObpGQ3i-CvI/видео.html
I don't drive anymore, but when I was driving, I had a small 12v heater I was able to point at the outside temperature sensor. It would register like 110-120 degrees outside, and truck stayed running all night lol. Wish I knew this trick
It works!!!! Thank you so much
you're the best hahahahahaha
It only worked for 30 min then it shut off
It’s working. I went home for a week and came back to truck and it was still running. Nice cool truck when I got back in. 🤣
Hey it worked. I didn't use the weight dumb bell. I used a shoe. Wedged it between the foot peddle and the bottom of the dash. It worked. Man thanks allot. Wasn't getting any sleep because of the heat. Now I'll be able to. God bless you
Very informative thanks for the help
You sir deserve an award I’ve been stuck all week with a broken apu and you have saved my life
So.... My truck is on fire now. Whats the button and accelerater combo to put it out? Break peddle maybe?
I tried this with my foot just to see if it would work. It did. Once you start the truck with the peddle down and hit Accel/res, after the rmps go up you can let go of the peddle and it will stay on 700 rmps.
Jaja 😂🤣😂🤣 you went to far i just use a plastic fork betwen gas and that is it keep 7 to 7 rpm and is ok
Thanks this works , my Apu went out yesterday. 2016 Cascadia
The override button works on my 2016 cascadia II but doesn't work on other trucks in the same company.. Depressing the brake pedal also works on all 2014 to 2016s that I've been in. Thing is pressing something defeats the purpose of having it continue to run for HVAC while resting. Has anyone asked their company to disable the shut down or adjust the temperature settings? I'm soon going to bring it up to my company and if it's as simple as asking the temps to be adjusted... I'll let ya'll know!
It worked thanks man
Thanks for the video but it doesn't in this truck at all
I did it and but thiers an easier way do what he said but use your foot and bring it up to 700 n turn on cruze control n tap the acc/res button and it should go up to 8 or stabilize n u can remove ya foot it should stay reved up at u or 8 n it wont shut off
It works bro thanks alot... I was about to quit celadon cause I'm not freezing in this winter! I might still leave celadon... crappy company. Worse move as a driver so far by coming here!
they way u smiled at the end of the video was like you knew you just solved everyones problem
Timothy Guerra it was more about getting back at the system but I’ll take that too.
you are the fucking man sir works like a charm i dont even have to push the resume button just hold the pedal down and start my truck an the rpm only goes to 6
I love you! I own the truck and want it to idle in the winter but need idle shutdown in the summer. You saved me a bunch of cash at the dealer! 2017 evo