Видео

Hayabusa power

I've got a gen 2 hayabusa, do I need my stock shift arm near 1 o'clock, what are the benefits of this , I've been trying to look for the stock position of the arm as when I put it into neutral the green light on dash has some issues finding itself

Could I ship you my 99 zrx1100 carbs to be cleaned?

A Busa can definitely make a tourer but needs a fair bit of mods

sounds so good.

I hope you see this. I feek like mine has a lot of vibration at higher revs but no noise also could the cam tensioner cause the vibration as well?

Sounds like a big bore sport bike.

Is this still worth using?

Timely video. I just now finished changing fluid in my 2023 R1250RS. Your fluid looked exactly like mine. Nice golden yellow. I put back Ate Type 200. You are correct on the brake feel. Both back and front improved with the fluid change.

In the 70's and 80's I worked at Kaw and Honda dealerships and we had to replace the manifolds about every 2-3 years. They do go bad. Usually thru tiny cracks in the rubber.

This man is not only a mechanical genius, he’s an outstanding human being.

do you have a link to which tester you bought?

Thanks for the video

Video on how to adjust the low/high beam. Bike is lowered 1.5 in the front.

Mine, from new, won't start up.. it only gets the igo primo screen. When you touch it the device shuts down.

You are a life saver, I have a 2008 Hayabusa every time I shift into first gear it shuts off... any idea why ???

Purchased my Shinkos 4 years ago..O problems. Took the bike to 130 multiple times..I'm gonna order more.

Bet ya wish you were in your truck that day lol

You R a master riding on that weather!

Awesome video. Good work. I just bought a 2021 GT pro with a Corbin heated seat installed. The corbin seat height is 32.5 and I need the bike at 31 max. I am having Soupys lowering kit and adjustable side stand installed by the shop I bought it from. Forks will be raised in the upper yoke to maintain geometry. Since the highest seat setting on the low model is 30.7, I'm guessing the center stand will be unusable at my desired height? I like the idea of using a 2 x 4 or similar to engage the center stand for general maintenance but wondering if the center stand will drag once the bike is lowered? People seem to have done well with the Lust racing links going 1.2 inches lower but not sure if that is the sweet spot? Any knowledge in this area? The shop I'm using is not a triumph shop. Im doing a fly in and ride out.

So got a 2000 busa and replaced the clutch and basket and still having issues of great lock up and engagement when the bike is cold. Drive a couple blocks bike warms and I lose all gears. Let it cool down and same thing. Is it due to this master not getting a good seal?

Really?

Good info ....wish it had all been linked to other ABM video!.... searched though an looks like I got the final word! Bought the ABM conversion for my Gen2 and putting all the stuff together for a one time do it all conversion!

when i try to start my hayabusa in gear i hold the clutch in and the bike just lurches forward and won’t start but turns over do you have any ideas why

love the bar end mirrors. Part #? Manufacture?

I'm in love.

Oh great! He’s located in Houston so am I- WONDERFUL!!! Great video!

Lol then you go and you eat 3 whoppers and there you have the 6oz weight reduction

Hey what brand is that handlebar kit, as well as those bar end mirrors?

You should have called this video ‘the lazy man’s way to check the valve clearances’… take the fairings off dude ! The way you are doing this valve check will not give you accurate results… the fairing removal will take you around 15 minutes… when doing valve clearances you need to have the crankshaft in exactly the correct position which you cannot do without removing the crank end cap

Where did you get that seat.

Oh. I’m in Los Angeles area. If you know anyone you’d recommend in this area please let me know. Thanks 🙏🏼

I have the same bike and needs a service, where are you located. Thanks :)

muito bomm

Thank you brother, replaced my slave cylinder today and can't build enough pressure no matter what. Gotta be that master cylinder. Much appreciated!

it howls like a ducati v4 🥵

How can I get just the screen filter? Some alternative?

Pardon me but that seat looks ridiculous, touring or otherwise.

Great job, as usual! I'm sure it will run perfect when you are done.

Man i wish they still made these 😢

Thanks, from Chile.

Great job there Bryan. You and Mr. Wells have tooo much time on your hands.

Great sounds!

I also have limited rang of motion in my left ankle due to a major motorcycle incident I had back in 2015. This is why people do the Buell peg conversion i guess. My friend gave me a 2005 Busa I've been fixing up. I finally sat on it and noticed shifting is tough with the limited rom. Also have limited rom in my knee. Damn this sucks. I found your video because I ran into the issue with the side stand bolt when I was trying to switch to GP shift.

FYI gasoline will flood air filter and air box when on side. Replace air filter and clean air box before staring or riding. It will mess up the ECU and potentially cause internal fire. Learned that the hard way.

Lovely video mate! Any ideea if this is applicable also for GSX-R K5 K6 ?

My '02 slips (false neutral) from 5th to 6th...scared the shhht out of me. I immediately squeeze in the clutch and pull over. Doesnt happen every time though... could it cause my tranny to lock up and kill me? Thanks

How long in inches is your clutch hose?

The bird has 2 also.

Well, i was gonna buy one of these, so, you saved me some grief. Thanks.