- Видео 11
- Просмотров 65 329
Musekmkr
США
Добавлен 14 окт 2007
86 Mustang - Interior Refurb Ep. 3
Well, we gutted it all and found a few surprises along the way. Now it's time to start cleaning this upholstery! I can't believe how dirty it actually was.
Просмотров: 714
Видео
86 Mustang - Interior Refurb Ep. 2
Просмотров 4256 месяцев назад
Stay tuned as we really start to get things cleaned up. We get the last bits out of the interior and start doing some thorough cleaning and find a nice surprise under some sound deadening...
86 Mustang - Interior Refurb Ep. 1
Просмотров 8456 месяцев назад
I really get into it when one thing leads to another in an attempt to do some much needed cleaning in the 86. In an upcoming video, I do a thorough cleaning of the carpet and seats and am absolutely amazed at how good everything turned out. Everything was much dirtier than I thought... The results are truly impressive. Disclaimer :) My editing skills are not the greatest so please feel free to ...
Walkaround of the 86 Mustang
Просмотров 5076 месяцев назад
I'm looking to get this car back to its former glory.... without going too far ;) Here's a walkaround of the car highlighting the good and the bad. My initial plan is to start on the interior. It's in need of a thorough cleaning...
Got myself a Mustang
Просмотров 1,3 тыс.6 месяцев назад
I've been looking for an 86 off and on and actually stumbled on one locally...from none other than Chris over a NNKH. The car definitely needs some work but I'm looking forward to fixin her up.
Fix PS4 Slim disc not spinning unrecognized
Просмотров 53 тыс.2 года назад
After I dropped my PS4, discs would no longer spin after being inserted and I would eventually get an unrecognized disc message. After watching many videos on RUclips and verifying that the connecting rod and rollers were intact, and no other obvious issues were present, I realized that the little white disc ended up coming out of the carrier. Simply placing it back in the carrier fixed the pro...
Disassembling a Saginaw Steering Box
Просмотров 5 тыс.4 года назад
I decide to tear down the steering box from my 67 Nova for a thorough inspection, cleaning and reassembly. This is more than likely the first time it's been disassembled so, as you can imagine, it was pretty gnarly. But, for being fiftyish years old, the internals were in surprisingly good shape. Be sure to watch the other videos where I go through the reassembly, step by step. Assembling a Sag...
Tour of the 67 Nova
Просмотров 1604 года назад
Just giving everyone a tour and a little bit of a detail around what I've been doing these past few months. Now that Power Tour 2020 has been postponed, I am not sure if I will be attending in August, but more than likely attending 2021. With that pushed back and everyone on lock down, I am using this opportunity to push through and finish up the project. Hoping to make some more in depth videos.
Assembling a Saginaw Steering Box - Part 2
Просмотров 1,2 тыс.4 года назад
Completing the assembly of the steering box. Of course my camera was not in the greatest position and it may have moved into an even worse position as I was recording. My apologies. Assembling a Saginaw Steering Box - Part 1 ruclips.net/video/Jy1lGnAqRpQ/видео.html Disassembling a Saginaw Steering Box ruclips.net/video/sWYOz9aP7iE/видео.html
Assembling a Saginaw Steering Box - Part 1
Просмотров 2,4 тыс.4 года назад
Installing the ball bearings in the worm shaft/gear assembly. Sorry my head got in the way at one point. This is hopefully the first of a few videos showing you how I reassemble the entire unit before it goes back in the car. Assembling a Saginaw Steering Box - Part 2 ruclips.net/video/vxC1JMUj8mI/видео.html Disassembling a Saginaw Steering Box ruclips.net/video/sWYOz9aP7iE/видео.html
My case is different, my PS4 slim pulls the disc but it doesn't spin, it goes into the console and nothing happens.Can you help me?
Update: I opened the drive and there was a piece that held the roller loose, I just had to fit it in and problem solved.
@ToxcytJoao96 I had the same problem. I'm not sure how to fix it. Can you help?
@@Arehman646Open your Playstation drive, remove those two rollers that are right in front of the drive where you pull the CD and fit it into the cam I solved my problem like this, the rollers were not fitted properly.
I known how to fix ps4 work only vertical
What is that foaming product that you used to clean with? Great job, btw.
Appreciate that. It's called Tuff Stuff
Im also having a similar problem but i have not replaced this thing yet and ask one thing. When i insert a disc in ps4slim. The disc goes halfway thorough and spins outside. U can see the video I uploaded on my channel. Pls tell me if u know anything
we just found the location of a spring that had sprung thanks to your video!
Howdy!
The small things alot of people miss and some dont ever do. Looking good.
I have something similar. Starting your first disc is easy. I can play as long as I want until I replace the disc with another one. then the console tries to read it and stops. I hit the housing with my hand from above and the disc started spinning and the reading was correct. I remember taking it apart several times before. I think my problem is the same, I have to deal with it...
I had same interior in my 86gt once, loved it
Keep up the good work! 👍🏾
Sunroof is the culprit
Yes quite possibly. I'm on the sunroof now and there is a little rust on the lip on that side as well. It must have pooled in the passenger footwell and been there for a while. Also the drain lines are clear but they seem short to me. So I may extend them a little to ensure they don't pop out of their exit hole.
Door striker
Yes haha. Funny how you forget things when on camera. I remembered when I got to the hatch striker 😁
Bro I needed this
Glad to keep up with this car! Jen got a good start on it!
"Tailgate"? 😂 That's a Hatch.
Haha Tailgate... Hatch....
Amazing project so far. The cleaning of the carpet and furniture was crazy how good it came out. Kudos for putting in the time and keeping up with it. Your video editing is coming along really well! Love it!
Much appreciated! Glad you enjoyed it.
Followed the Mustang from over on NNKH. Curious to see how it turns out. Looking good.
Thank you. Appreciate it. Yes it's getting there! Can't wait to get it back together.
It's coming along.
One more great video. Thank you!
Typical places for mice to get in a vehicle are just above the firewall under the hood and behind the spare tire at the rear of the car and of course around the fuel filler tube (although different cars can have other places as well). You would need to inspect for any other access places. I used some stainless steel mesh and screwed it over the holes to prevent the mice from getting in. I also had to use the mesh over the air intake (before the filter), otherwise they can get into the air filter and create more problems.
Shouldn't be much of an issue where I am but I'm definitely going to fix that fuel filler gasket.
Love it! Keep it going!
Appreciate it. More to come for sure.
What type of screw you did to open that disk
I followed the car over from NNKH and found you are also a great watch. Keep it going please.
Great video😀
Subscribed, came from NNKH channel😎
Mice can really do damage. If I ever need to store a car long term, I'm getting another cat. lol
Great Stuff! Crazy how those mice get into, and throughout an entire vehicle when left sitting!
I came here from jens chanerl and subbed onto yours 👍👍
Much appreciated!
lookin forward to seeing the transformation! Go Birds!
Got a good car from good people.
Came from Jennifer Sigint channel... Liked and subbd to yours... Can't wait to see what magic you do to it !!
Glad you will take care of it, those are very capable cars!
Git' 'ur done.
Looking forward to the continued journey on the Stang, followed from Jen’s channel. Love this car
Came here from the NNKH channel. Subscribed.
show
Dude, this helped me!!! I picked up a PS4 from facebook marketplace tonight with the same problem. Thanks so much. What a "simple" fix! Plus it doesn't cost anything.
Mate, 2y later, and you helped someone still. These shit RUclipsrs didn’t help for nothing, so thank you, thank you man.
Gotta love RUclips 😉
@@musekmkrhelped me like a champ, earned a sub. Every other ytbers don’t know shit haha
Your a life saver thank you so much
My disc just wont spin even doing that
dont have a TORX screw to get the top open
TYSM!
I thought this might of been my problem. I took the top off my ps4 and the medal cover messed with the two black arms and slipped the disc in and it worked for a day or two and started doing the same. so I took it apart again took the disc taker out and messed with things in there and some how got it working again. It worked for a few days and now the disc drive laser just gose back and forth on it's rails and the disc isn't spinning. I don't know now
THANK YOU. And people say they can't make a difference in the world.
It worked🎉🎉🎉🎉
TYSM
Help me bro I just replaced my disc drive about 30 mins ago with a brand new disc drive and still comes up with unrecognized disc message tried 10 different games
put "slim" on the video tittle if possible. thanks
Just pulled the youngins apart he put a 10 cent coin in it haha 😂
Muse, how did you get the Pittman arm off? Mine is on real tight. Otherwise, getting other parts off the box pretty easy.
If you can't wiggle it loose, you'll have to use a puller. You can buy or rent on from a local auto parts store or even get one cheap from Amazon.
@@musekmkr I have a cheap one from HF and the jaws are just a few mm's wide so they slip off when I hit it with the impact drill. frustrating.
@@chasryan2040 maybe try putting a clamp or something around the jaws to keep them from spreading.
@@musekmkr I took it to a shop and they had a puller with smaller jaws AND, while using the impact drill, they hit it with a hammer and it popped off.