Видео

Thanks for your comment. I really appreciate it! :)

Hey, thanks for your message! 1.To be completely honest, yes the clouds look a bit weird when the lights are off and it's just daytime. If you are home alone, this is not a problem. When visitors come, it is best to turn on the lights in the cloud so that they can immediately see the beautiful effect it has. 2. If you buy high-quality LED lamps, they can (according to the manufacturer) continue to work for a very long time (up to 50,000 hours). I put a link to an amazon LED strip in the description, these are really good! 3. I have had the clouds hanging in my desk for two years now and have never had to clean them, no spiders get in and I don't see any dust! So you shouldn't worry about this. 4. Yes, for two years. 5. As long as you can staple staples into your false ceiling, this should work. 6. I can't answer that as I haven't done it myself yet :p I just think you'll have to be careful and take everything off in the reverse order of application.

@@diycreative2078 Thanks bro! Pure Value 💛

Thanks! They flew a lot less far as they weigh much more in percentage terms compared to the counterweight. The 5M nuts flew the furthest of all! You can purchase these by using the link in the description. :)

Thank you! 😁

Thank you for your comment! 😁

I will look into this, for now there are a lot of other video's about this on RUclips. :)

That's absolutely true! However, most people don't have Depron at home (neither do I), but almost everyone has cardboard at home, which is why I used this material. 😁

Thanks for your comment! Means a lot! :)

Thanks for the tip! 😁

Thank you, I try my best! 😁

Thank you very much! 😁

I would make a wooden frame and hang it on your ceiling with a few screws. You will have more work, but this way you can also staple clouds to the wooden frame you have made. :) If you are not allowed to drill holes in your ceiling, you can still make a wooden frame with the polyester on top, but then simply place it against a wall so that you do not have to drill holes.

Thank you for your comment! 😁

Yes, I think I used 21,3 kg of wet material and 0,4 kg metal rebar at the center, which then came out to 20kg when dry.

Thanks for your comment! I found the polypropyleen inside pillows that I bought in the "Action". If you are from Flanders you will know that store for sure. 😁 They were super cheap, like 50 cent a pice. If i´m honest, you don´t really need it, you can do it with the polyester only. It will still look good. 😄 Good luck!

Thank you for your comment! You can pause the video at 4:53 to see the way I hung the lights on the ceiling. 😁

Thank you so much! :)

That's a difficult situation. I would make a wooden frame and hang it on your ceiling with a few screws. You will have more work, but this way you can also staple clouds to the wooden frame you have made. :)

That's a great idea! Thanks for sharing it with us. :)

Thank you for your comment! They are lucky cats!

That is a really creative idea! Thanks for sharing it with us. :)

Sorry for only replying now, but the water doesn't evaporate. It will be part of the concrete so you need to factor in the weight. Only a very small percentage of the water will evaporate and be lost. (I normally show this in the Excel file). :)

Thank you so much for your comment! You made my day! :)

Thank you so much for your comment! I'm working on the second part and will upload soon. :)

Thank you so much for your comment!

www.amazon.com.be/dp/B089GCV8MY?ref_=pe_43847721_708903971_E_301_dt_1

Yes it is safe as long as you use LED lights. They do not get warm. :)

You can decide for yourself which colors and effects you want the lamp to display. In the video it seems intense, but you can put it on a more quiescent setting or only display one color if the party mode is too much for you. That way it is not dangerous. :)

I just don't glue a little part of the strip and bend it. It's not perfect and sticks out, but with the polyester on top, you won't notice it! :)

Thank you! :)

The circumference of the plate is 141 cm, the height of the sides are 6,36 cm or 2,41 inch. :)

Most people use polyester and it works great! :D

What a story, you could write a book! :p

Thank you! My brother who made this is in his senior year of engineering and doing a great job! :D

@@diycreative2078 nice bro. Gonna make my eboard soon hopefully. I'll hopefully make a series of youtube videos about it.

No dust, no spiders, no fires, just a really cool effect! :)

@@diycreative2078 thanks !! you still have this ?

I promise I won't! ;)

Great idea, I would do the same if I were in your situation! 😃

Kan je eens testen in een hoekje van je plafond maar beton lijkt me echt wel hard, misschien kan je een houten plaat met enkele vijzen aan je plafond vastmaken en daar dan de polyester en de nietjes aan vastmaken.

I used: Lideka - LED strip 10 Meter (2x5) - RGB-IC - Dreamcolor. I live in Belgium (Europe) so if you are from the states, you might have to look for something else. A lot of people recommend "Govee led strip" on amazon.

The dimensions of the plate are: diameter = 45cm (or 17,7 in) - circumference = 141,37 cm (or 55,66 in) and the depth is 6,36 cm (or 2,48 in) (You can see this info at 2:25 min, in the video) :)

Thank you! :)

I used: Lideka - LED strip 10 Meter (2x5) - RGB-IC - Dreamcolor. I live in Belgium (Europe) so if you are from the states, you might have to look for something else. A lot of people recommend "Govee led strip" on amazon.

Thanks! I have seen a grand total of zero spiders in the polyester. They simply are not attracted by it, so nothing to worry about! :) To clean it, is another issue. It has been up there for 9 months now and it still looks like new. So I wouldn't worry about that either to ;) It is worth doing!

I don´t, but you can make your own by following the steps in my video 😁