Видео

Pretty much! 😂 I worked on the clearing way longer than the actual fence

Thanks brother 😎

For real🤣 I’ve never actually found anything of value. He got a 1 In a million hole

Yuhh

Thanks! The amount of colors available now is crazy

We do 8 foot centers and with 6 inch pickets It comes out to 90 1/2 between the post. I recommend to anybody who’s doing it for the first time to at least build and set the first section and then measure it. Then cut a jig at that length and set it between your posts

😂

The pickets? You’re still free to adjust the fence and this is just so much easier

What’s that?

yea, and our houses cost 50x yours, its kind of broken.

True. They probably don’t live in a place with windstorms like that.

@@lukes2219 vinyl fencing is one of the most common types of debris found littering the coastline after a hurricane. It's everywhere in Florida right now.

You’re right. After hurricane haleen, Vinyl is our #1 repair call

@@lukes2219bro. You’re not safe from any uncommon storm. The government can manufacture whatever they want wherever they want, whenever they want.

@ I’m pretty sure a hurricane would take out a wood fence too but yea ppl show really think of the environment

🤣 that’s how I felt at first but quickly changed my mind

The inserts that the company gives me are the same length as the post. I do personally recommend driving them if your ground is soft enough to do so

If he thinks the post hole diggers are too heavy imagine if I handed him an auger. We do have augers but some guys choose the post hole diggers because the auger is too heavy 🤷‍♂️

@@FenceForFlorida get it how you live I suppose

I'll take a pair of these and a spud bar over a 2 man auger in any yard that's NOT sand. You're going to hit one tiny little root and be on the long walk back to the truck for the pipe wrench 😂

I have to say the little beaver auger eats everything but it’s like $4-5k

Whaaaat! 😂

He's not too short, he's actually too close to the work for his personal comfort.

Homeland vinyl products

@@FenceForFlorida thank you

NCF

That’s awesome! I’ll be anticipating those videos

A high tooth count blade or just flip the blade to cut backwards. Puts a little more load on the saw but will cut without shattering the vinyl. Some additional info: Vinyl shatters easier in colder weather. The faster the saw the less chance for the vinyl to shatter with use of any blade. I use a wood blade on my Milwaukee fuel on every material and it cuts fine. I say this because on my non fuel Milwaukee, it needed a full battery to cut fast enough with any blade.

Our company does a sag style. You can do it either way. I’ve done it this way for 8 years and that’s how all 6 companies that I’ve worked with do it and I have 0 problems out of my gates. The engineers may have designed it to go top of latch to the bottom of hinge But I find it works better To hold the weight at the latch rather than trying to push the weight

I use a 8ft aluminum insert inside the post as seen in the video. 6:23 if that’s not what you were asking, You may need to clarify to help me understand.

@@FenceForFlorida th for your reply. Yes I’m referring to vinyl fencing. Forgive me but I didn’t see the insert portion but yes the I purchase a mounting tower kit from Amazon to fix to concrete and then install the vinyl post cover. I wanted to know if it was a good idea to insert a 4x4 in additional to this insert I purchased from amazon would be sufficient for installing a vinyl gate onto once affixed to my concrete border.

The benefit to adding stuff inside of the post is help hold the screws from pulling out and to help the vinyl post from flexing. Your steel inserts should be great but try to make sure it reaches all your screws or at least 75% up to the top of the post for the flex. Also, You will probably need a handful of drill bit to go through that steel

I did the same thing yesterday at my brother's house. Converted his 4x6 Vinyl fence into a gate. I did put a 4x4 piece of Woodson each post. Tried it without the wood at first and it did not feel well secured.

@@fajardoju90thanks so much for the advice. I’m actually gathering all the parts and the steel inserts I’m using as a posts. I actually asked Home Depot today about if they had 4x4 vinyl fence posts as opposed to the 5x5 they have & they didn’t know anything. Therefore I appreciate your reply. My side area is 8foot wide and I want to make a 6 ft gate w a 4x6 vinyl gate. Hope it all comes out ok. Which gate kit do you recommend if any? I may have to order online.

I’ve been doing this for eight years and saying that every single fence company in the entire state of Florida is just rookie and lazy is just wild.

Didn’t think anyone would guess

Probably went straight to voicemail

How do they know you won’t hit anything??

😂

@@SoSo-c5b I work for a major natural gas pipeline. We send out line locators with special tools to detect our pipelines. We have to respond to any request for location (811 call) within 24 hours and mark not only our pipelines, but also the safe digging boundary

She would definitely let me blow up

It’s like finding buried treasure

🤣