Видео

Thanks! This just motivated me to finally insert my doors. Wish me luck 😆

thanks much! This was very helpful.

This was perfect. Thank you for making this video!

this was so helpful, thank you!

I've lost the small ruler, what is the distance the insert should be from the edge?

What is the size in CM of the plastic hook please? I don’t have one in mine

Your video is unbelievably helpful. Thank you for your clear, concise instructions.

My hinges had to be screwed in, hope this helps someone, I tried for a good 10 mins to try and get them to click in like that before realizing lol

I have tried it, but the Fluffing of the ingot is the hardest part. But in the end, I have failed to make one. 🥲

I got the door ok but…..😢

How long is the plastic hook? I don't have this.

Question: do the screws for the inserts need to go into (penetrate) the sides of the shelf?

Thank you so much for making this video and sharing! 👍

Thank you for your helpful instructions! Your video makes the assembly process clear and simple, which is so helpful for those of us who are not handy. Thanks AGAIN!!!

Very helpful, thank you.

I am gonna install four of these kits in my Kallax, but the "plastic hook" is missing, so I could really do with the info on: how far from the edge is the pencil mark gonna be? Quite frankly, I hope IKEA will stop making plastic objects for this kind of "jobs", and instead provide the measurements in the manual. I bet most people that buy IKEA stuff both have a ruler, and knows how to use it. Considering the fact that IKEA is such a huge company, with shops in more than 50 countries, it is quite obvious that they will save the environment for many, many tonnes of unnecessary and very harmful plastic waste just by stopping to produce things like these "plastic hooks".

TABLE IS COOL

What is the name of the kallax shelf with the desk?

Mine isn't clicking into place when I attach the door, no matter how hard I push it. There's no click or pop :(

THANK YOU FOR THIS VIDEO

Is it possible to mount the door without the insert? So directly on the Kallax

For a company as huge as IKEA, it's really pathetic that the door colour doesn't perfectly match the cabinet.

I was staring for like 10 minutes straight at the mindfuck that is this unit and I could not for the life of me figure out how it worked. Thank you for your clear instructions.

By any chance can you tell me what the measurement of the plactiz corner is I lost mine and am not just messing up up cubicles.

A little late to the party but I thank you! Have never understood these hinges and now I do!

Joss paper manufacturer

That was back to front! The boxes should have been on the bottom so you could pull them out and rest of the floor to get into the contents and the cupboards should be on the top so you only have to bend over to get into the back, lower down you have to squat or get on the floor to access stuff at the back.

By far the best video on RUclips explaining how to insert the IKEA draws!!!!

dum

Yes , this video helped my son a lot. He was having a hard time assembling the doors so I went to you tube and find your video and he got it right away. Thank you.👍

Cool video. Was thinking about picking these up for my Existing kallax units and wanted to see a little more about them before driving 45 mins to ikea. Great vid. FYI, idk if you do it on purpose, but both your 2x2 units are oriented with the side facing up. The longer sides should be the top and bottom. Maybe you did it bc you don’t want the screws on the top surface? Idk. But they have more structural integrity if you put them how they are supposed to go. I use mine for some smallish rimless aquascapes (16 gallon and 10 on two separate 2x2 units) that weigh a few hundred pounds so for my case it matters. Ofc I reinforced the Kalax but out of the box they are pretty sturdy minus the lacking lateral stability. I also got them in the gloss white which is $10 more expensive as that finish is waterproof unless damaged. (I do think it looks best in that finish anyhow) I will silicone all seams where the edges meet soon. Just as an extra precaution. Sucks the gloss doors are $8 more each. Oh well. Thanks!

Thank u! I lost the directions thank goodness there was this video

Let me guess, the desk is made out of a 4x2 kallax module right? 🤣👌🏼

Does it come with the hinges?

THANK YOU FOR THIS VIDEO! I really appreciate that you just gave the instructions with no extra filler, 4 minutes to the point... PERFECT!

Thank u for sharing,hope visit my poor house

Thanks!

Great video your awesome for this!

thank you

So so helpful, thank you! I’ve been trying to figure out the images for ages. So glad I found this video.

Mine is not working. I barely can get it in the wood. I didn't hear a click either. 😥

Merci

Moving my door insert but I don’t have the plastic hook anymore. How much does it set the door insert back from the front?

The included pointy screws (used for tightening the hinge hardware) are too short. These screws are supposed to go first through the metallic hinge, then through the hard paper insert and then finally lock on the internal side of the kallax very tightly (which by the way doesn't have a fixed hole on its internal side for this). It's a matter of luck if someone gets to do it right the first time, without the screw gets poped out. In other words, you're "screwed" if you don;t manage to screw it exactly right and as a result the door simply won't stay fixed. That's an Ikea problem and they should provide longer screws for this particular step, as well as have fixed small holes. I'm surprised how they haven't predicted this any better, in their overall design.

Thank you very much! ❤️

Thank you, was really helpful. I had no clue what I was doing before and now I have put the door up.

I am missing the small spacer that gives you the measurement to recess the door does anyone know what the dimension is please ???

Thank you so much for this video. I just follwed it and ... success!

Thanks. These turned out to be a bit more complicated than expected

Wonderful , thank you for that .I shall now follow your instructions ( 16 doors to put in ).....