MrPhukyew
MrPhukyew
  • Видео 200
  • Просмотров 606 352

Видео

my story about secret service, the shots were planned.
Просмотров 773 месяца назад
my story about secret service, the shots were planned.
klx 650 street legal fun and cold kick start in slip-ons.
Просмотров 355 месяцев назад
considering putting this bike up for sale 1996 Kawasaki KLX 650d. I put the top end together about 3 years ago. standard bore all stock and new piston. I also portee and milled the head while it was apart. jetted, piped, not even a little scared. this bike will do 130 and as you will see in the video, 60 mph in 2nd gear. will wheelie at 55 in 3rd and carry it to 85ish. tach, speedo, temp gauge,...
my morning ride on my klx650
Просмотров 396 месяцев назад
my morning ride on my klx650
injector test with JD fuel injectors (seller to avoid on eBay)
Просмотров 466 месяцев назад
It's a long video but if you listen to my rambling you will understand the whole story behind it and why this video took place. if this video is made public then that means JD fuel injectors did not help us recoup our losses from their bad injectors. if they do at least refund us for our sets of injectors then this video will never be made public. update. they only refunded me for one set of in...
Maddie driving the off-road toy for the first time
Просмотров 908 месяцев назад
Maddie driving the off-road toy for the first time
bounder 33' RV for sale
Просмотров 28Год назад
bounder 33' RV for sale
common "mekanick" DIY mistake.
Просмотров 1,7 тыс.Год назад
for those of you that like to avoid paying mechanics fees, don't damage it worse.
awd twin turbo 4.8 Silverado 10psi 87 octane?
Просмотров 543Год назад
you read the title correctly, this is a twin-turbo 4.8 Silverado that's full-time all-wheel drive and is tuned on 87 octane. it runs 10 PSI boost and is daily driven in phoenix az the engine is stock and high mileage and never been opened. the turbos are cheap China internal wastegate ".50 trim" and it has a front mount intercooler. stock trans and stock converter with Denali front diff and tra...
oops, dropped a valve into the engine. now what?!!?!?
Просмотров 291Год назад
oops, dropped a valve into the engine. now what?!!?!?
my accomplishment for the season, TWINS!!!
Просмотров 261Год назад
my accomplishment for the season, TWINS!!!
my twin turbo trucks new setup
Просмотров 130Год назад
stock lq4 with 823 heads and studs. btr torque cam 202/202 .510/.510 111lsa ly6 intake manifold and 92mm tb flipped over modified truck exhaust manifolds chopped and welded with t3 flanges and 50mm wastegate vbands twin gt35 china Choo choo's 62/62 .82 a/r T3 with 3" 4 bolt exhaust out. 3" dual exhaust with 40 series 60lb injectors and walbro 450lph 2 bar map factory p01 pcm stock 4l80e with 24...
sneak peak of the new twin turbo truck (ttt)
Просмотров 66Год назад
sneak peak of the new twin turbo truck (ttt)
my little one making fast progress at the pool table
Просмотров 52Год назад
my little one making fast progress at the pool table
the twin turbo truck, my daily
Просмотров 101Год назад
the twin turbo truck, my daily
my rant about "non violent protests” hypocrisy
Просмотров 57Год назад
my rant about "non violent protests” hypocrisy
cold start sloppy stage 2 bored out 6.0
Просмотров 2692 года назад
cold start sloppy stage 2 bored out 6.0
knock sensor testing gen iii ls
Просмотров 1692 года назад
knock sensor testing gen iii ls
my truck (spare parts) is being created and it starts here.
Просмотров 663 года назад
my truck (spare parts) is being created and it starts here.
kevin J Cobo's memorial service
Просмотров 973 года назад
kevin J Cobo's memorial service
testing welded diff in turbo is300 we built
Просмотров 1,3 тыс.4 года назад
testing welded diff in turbo is300 we built
big ls build in gmc Sonoma. 400+whp
Просмотров 2194 года назад
big ls build in gmc Sonoma. 400 whp
My Karen story
Просмотров 1414 года назад
My Karen story
Some L.E.D. lights we did on an f150 tonight
Просмотров 264 года назад
Some L.E.D. lights we did on an f150 tonight
3.5 stroker j32 block 6 speed we built.
Просмотров 9574 года назад
3.5 stroker j32 block 6 speed we built.
Big cam big turbo ls truck hood exit exhaust
Просмотров 4 тыс.4 года назад
Big cam big turbo ls truck hood exit exhaust
Turbo 2jz Is300 fuel pressure regulator (the easy/cheap way)
Просмотров 10 тыс.4 года назад
Turbo 2jz Is300 fuel pressure regulator (the easy/cheap way)
Important info you should share a lot
Просмотров 3334 года назад
Important info you should share a lot
Here's where the stereo went
Просмотров 1144 года назад
Here's where the stereo went
Step by step tips and tricks for turbo 2jz-ge is300 (links in description)
Просмотров 43 тыс.4 года назад
Step by step tips and tricks for turbo 2jz-ge is300 (links in description)

Комментарии

  • @solaryellowis3007
    @solaryellowis3007 6 дней назад

    I wonder how many boosted their jz due to this video. I definitely did.

  • @365AdventureCo.
    @365AdventureCo. 14 дней назад

    Any pros / cons to running twins vs a single? I have a 06 2500 also in AZ and wanting to tow from PHX to payson 7k lbs

    • @MrPhukyew
      @MrPhukyew 14 дней назад

      @@365AdventureCo. I'm glad you asked, with twins it's a little more complicated when towing heavy loads because they fight back and forth and you'll hear air surging and get boost gauge fluctuation. If you do plan on doing Towing you will probably be better with a single. I have a full single kit here for sale if you're looking for one.

  • @Jimster4113
    @Jimster4113 18 дней назад

    2 question's, did u take a spring out of the wastegate and just leave the one in to get 7psi instead of 10? And with capping that line off on the right side of the valve cover should you do that with even oem stock injectors? Thanks.

  • @matthewrodriguez552
    @matthewrodriguez552 Месяц назад

    Hey cobo Levi again lol question how much is it gonna cost to go from pr4 ecu (obd0) to obd 1 to use hondata it’s in an ef hatch b20b low comp

  • @Slimerancher69
    @Slimerancher69 Месяц назад

    Man alot of these 420a cars are long gone its a shame is there anyway a guy could acquire some of your legendary work? I got a 95 rs from my buddy that he built 13 years ago but it was done all wrong. Ive got a 2.4 that would be sweet to use. The car once dialed in will stay as is for as long as i own it which is forever. Nobody knows anything about these cars.

    • @MrPhukyew
      @MrPhukyew Месяц назад

      @@Slimerancher69 you would have to bring it to Phoenix Arizona

    • @Slimerancher69
      @Slimerancher69 Месяц назад

      @MrPhukyew honestly to me it'd be worth it you know all the tricks with these things.

    • @MrPhukyew
      @MrPhukyew Месяц назад

      @@Slimerancher69 where are ya?

  • @25091990ify
    @25091990ify Месяц назад

    Hi! How about stock ecu? Or you have tuned?

    • @MrPhukyew
      @MrPhukyew Месяц назад

      @@25091990ify these stock computers cannot be tuned. All we can do is work around what we've got

  • @HAJRIZKINGZ
    @HAJRIZKINGZ Месяц назад

    Hey man love ur videos can you build me a block ? 2.4 with the srt pistons.? I live in Canada

    • @MrPhukyew
      @MrPhukyew Месяц назад

      @@HAJRIZKINGZ I don't do shipping you would have to come to Arizona

    • @HAJRIZKINGZ
      @HAJRIZKINGZ Месяц назад

      @@MrPhukyew can I email you or facebook?

  • @dantesparda-b7c
    @dantesparda-b7c Месяц назад

    Thomas Melissa Thomas Sarah Walker Carol

  • @matthewrodriguez552
    @matthewrodriguez552 2 месяца назад

    Hey cobo question for ya b20b non vtec low comp in ef hatch obd0 pr4 ecu how much to slap the turbo I traded u for the smaller one to be installed the ls2 Camaro is a no go since a boosted v8 ain’t practical in this day in cali

  • @yung.letuce
    @yung.letuce 2 месяца назад

    Off topic question, but do you still build NA-T 300s for people?

    • @MrPhukyew
      @MrPhukyew 2 месяца назад

      @@yung.letuce I suppose I could, it would be about a $3500 dollar job just because of how much is involved in doing it. And that's assuming I'll be able to find all the same parts again

    • @yung.letuce
      @yung.letuce 2 месяца назад

      @@MrPhukyew is there any way for me to contact you? I’m pretty serious haha don’t know wanna just spring it on you tho !

    • @MrPhukyew
      @MrPhukyew 2 месяца назад

      @@yung.letuce if you look at my slideshow video or the Paul walker replica videos you will eventually find contact info. I'm not posting it here

    • @matthewrodriguez552
      @matthewrodriguez552 2 месяца назад

      @@MrPhukyew hey cobo is that the same bike I ate shit on

  • @alvinmarshal5303
    @alvinmarshal5303 2 месяца назад

    Where is your shop in AZ?

    • @MrPhukyew
      @MrPhukyew 2 месяца назад

      @@alvinmarshal5303 really odd video to ask that question on

  • @matthewrodriguez552
    @matthewrodriguez552 3 месяца назад

    SUV 8x only 2 or so are fully encased in armor

  • @matthewrodriguez552
    @matthewrodriguez552 3 месяца назад

    Hey I remember that day

  • @matthewrodriguez552
    @matthewrodriguez552 3 месяца назад

    ruclips.net/user/shortsEtdqXvkrUBo?si=4NaRtqaM41TqOc7E

  • @w3105
    @w3105 3 месяца назад

    I don’t know if you will even see this, but thank you for your video, best one I’ve seen so far for 420A engine 🎉😮

  • @GasBrakeSim
    @GasBrakeSim 3 месяца назад

    Hey brother . In your 2JZ turbo build , you mentioned we needed 2 sets of o rings for the Supra injector swap. Which o rings do we need to add ?

  • @GasBrakeSim
    @GasBrakeSim 3 месяца назад

    Hey brother . I’m really interested in doing a simple setup like this ! Wondering , when you mentioned the Supra injectors, you said we’ll need an extra o ring . can you explain a little bit?

  • @GasBrakeSim
    @GasBrakeSim 3 месяца назад

    Hi brother . Any way to update the list , or maybe put part names/numbers ? The eBay links no longer work . Thank you!

  • @matthewrodriguez552
    @matthewrodriguez552 3 месяца назад

    Hey cobo i got a Suzuki z400 quad sport it runs but won’t idle new gas but I’m thinking needs a carb clean and tune or replacement

    • @MrPhukyew
      @MrPhukyew 3 месяца назад

      Yeah it probably does. I have one of those too 😉

  • @jackmorrison5875
    @jackmorrison5875 4 месяца назад

    Can I still run it with Supra injectors without the fuel pressure regulator? I got the same set up but it’s demanding more fuel.

    • @MrPhukyew
      @MrPhukyew 4 месяца назад

      Yes the green top non turbo 7mge injectors do fit but there is a little bit of ghetto rigging you've got to do with the o-rings to make it all fit. I ran mine that way without a regulator for a long time but it did need more fuel over 6 lb of boost so I ended up doing the regulator which fixed that and got me a solid 8 to 9 PSI. The problem with that is it might be too much boost for the factory ignition map so colder spark plugs and tighter plug gap help as well as making sure you are running the best quality fuel you can get from the pump. If you add a large oil cooler for the engine then it helps prevent detonation as well by keeping the entire bottom side of the engine much cooler. I drove mine year round here in Phoenix Arizona with the AC blasting all the time and didn't have issues. Using a slightly bigger Turbo helps a lot to prevent detonation as well. The turbo I had used probably was giving a little bit more hot side pressure than necessary which will create detonation. This car is still alive and doing well and belongs to a friend of mine.

    • @jackmorrison5875
      @jackmorrison5875 3 месяца назад

      @@MrPhukyew good to hear it’s in good hands. Finished installing an intercooler over the weekend. Just been cruising it to work drives much better. Can’t get past half throttle so came across your videos for help and got alot of good info. I can’t decide to get a Walbro 255 or 350 lph I guess more the better right? Then the Supra injectors are the last thing to get on the list.

    • @GasBrakeSim
      @GasBrakeSim 3 месяца назад

      Hey brother . Any way you might have a build list ? I’d like to tackle a project like this , but wanna make sure all parts are readily available . Thanks man 🙏

  • @ManuelMendoza-hv9xu
    @ManuelMendoza-hv9xu 4 месяца назад

    D

  • @Peterbilt-vd9of
    @Peterbilt-vd9of 4 месяца назад

    Sounds good

  • @claytonoden3910
    @claytonoden3910 4 месяца назад

    🤣🤣🤣 give it to them straight

  • @scottferguson7279
    @scottferguson7279 4 месяца назад

    Ls

  • @claytonoden3910
    @claytonoden3910 4 месяца назад

    Believe it or not it’s for my lifted 4wd Prius!!

  • @ryanjs
    @ryanjs 4 месяца назад

    sup man can u make a playlist of all your 2jz/is300 videos?

  • @matthewrodriguez552
    @matthewrodriguez552 4 месяца назад

    Remember u gave me the keys one night said go test drive it old street race strip by your place I miss the cars you built def bringing a worthy car either ls or boosted 4 cyl

    • @MrPhukyew
      @MrPhukyew 4 месяца назад

      It was a fun car that's for sure

  • @matthewrodriguez552
    @matthewrodriguez552 4 месяца назад

    Man I always come back to this vid and say yup this exact build in an f body Camaro miss u cobo be seeing you soon for the Camaro

  • @jaysonbuitrago90
    @jaysonbuitrago90 4 месяца назад

    How you doing man I did the same exact setup but car keeps leaning out and running like shit bogging out can't figure out the issue

  • @ManuelMendoza-hv9xu
    @ManuelMendoza-hv9xu 4 месяца назад

    😅

  • @ManuelMendoza-hv9xu
    @ManuelMendoza-hv9xu 4 месяца назад

    F

  • @ReeeeeToaded
    @ReeeeeToaded 5 месяцев назад

    Do you still have this thing?!?

    • @MrPhukyew
      @MrPhukyew 4 месяца назад

      Yeah, I flooded it a few years ago and burned up my starter trying to start it and it's been parked ever since

  • @HAJRIZKINGZ
    @HAJRIZKINGZ 5 месяцев назад

    Hey man you still working on these ?

  • @Mike-ms8uq
    @Mike-ms8uq 6 месяцев назад

    Do you know that you have rapid blinker

  • @Doyle187
    @Doyle187 6 месяцев назад

    What spark plugs are you using?

    • @MrPhukyew
      @MrPhukyew 6 месяцев назад

      Ngk bkr6e if I remember correctly

  • @rickyboostedhonda27
    @rickyboostedhonda27 7 месяцев назад

    I can’t even tell you how many times I’ve watched this. Dude you should give yourself some huge credit !! Not only did you make a ton of power, but you went against what everyone says. Making 510whp on. 30psi!! Using an FMU on a stock untuned ECU !! Like how ? That’s just beyond insane to me

  • @Trevor-rs5ke
    @Trevor-rs5ke 7 месяцев назад

    Hey man not sure if you’re still around the phx area but i recently picked up an is300 build on trade and I’d like to get your opinion on it if you’re down for that. Thanks!

  • @Trevor-rs5ke
    @Trevor-rs5ke 7 месяцев назад

    Hello sir, not sure if you’re still around the phx area but I’m local as well. Picked up an built is300 project on trade and I’d love to connect with you and get your thoughts. Car still needs some work but I hope it’ll be a ripper when it’s all finished up

  • @devlenruby6681
    @devlenruby6681 7 месяцев назад

    Yo just curious how much power she making compared to stock non turbo

  • @MuK77S
    @MuK77S 7 месяцев назад

    How HP?

  • @804MRMAN
    @804MRMAN 7 месяцев назад

    I agree this is a great straight to the point video! But maaaaaaan that engine is a disaster 😂

  • @rickyboostedhonda27
    @rickyboostedhonda27 8 месяцев назад

    I seen an old video of yours talking about your 420a turbo with an FMU setup. If I’m not mistaking it was a gt45 turbo with a 2.4l motor, lol huge turbo. Anyways im kinda thinking of doing something similar ? I know that psi they are safe for, im more so curious to see if it was safe to daily drive ? How where you AFRs if you Remeber

    • @MrPhukyew
      @MrPhukyew 7 месяцев назад

      It took a lot of work to get it right but The videos are on my channel so go to them and look at the comment lists because there was a lot of conversation about it.

    • @rickyboostedhonda27
      @rickyboostedhonda27 7 месяцев назад

      @@MrPhukyewhey so I seen some of the convos. And wow! I’m beyond impressed. Everyone says FMUs are unreliable. Yet you had 20-30psi, upgraded fuel pumps and an fmu setup !! Insane ! I mean how exactly did you do it ? I Remeber a comment saying it was the stock ECU and tune. Just injectors, fmu, fuel pumps and MAP sensor. How exactly did the car not blow up lol ? I mean without being tuned im just curious on how it accepted all of that being thrown at it.

    • @rickyboostedhonda27
      @rickyboostedhonda27 7 месяцев назад

      Which FMU do you recommend the most ? People say blox is trash, I’ve heard good things from vortech and begi. only thing that scares me about begi is they label it as a FPR when it’s clearly and FMU, not sure why they do it.

  • @racheldykes6010
    @racheldykes6010 8 месяцев назад

    Great job Maddie! ❤

  • @flickthaworld2935
    @flickthaworld2935 8 месяцев назад

    Anyone know what size tee fitting for brake lines?

  • @jj92430
    @jj92430 8 месяцев назад

    So do you just run the hose from the barb down to the tank or into the jet?

    • @MrPhukyew
      @MrPhukyew 8 месяцев назад

      Which hose? Video explains it pretty well, if I were you I would give the video a second listen.

  • @zacharymelvin3487
    @zacharymelvin3487 8 месяцев назад

    Did you make your manifolds your self

  • @Slimerancher69
    @Slimerancher69 8 месяцев назад

    Hey man is there anyway a guy could get ahold of you i dont have facebook and i hate to keep bothering you on here. Ive rebuilt many 420a engines i just cant seem to wrap my head around using e85. Obviously bigger injectors and an fpr with an fmu but do you just feel it out with a wideband until your afrs look good. Nobody at all seems to know your secrets and i dont want to run megasquirt. Its just funny how everyone thinks its a hack when it seems to work and work very well. I just would love to know more because right now im running an adjustable fmu with stock injectors on 5 lbs which is fine but id like to squeeze a little more out of it without worrying about leaving change on the ground. Im on 91 with neon pistons stock rods and a 255 fuel pump. Thank you.

    • @rickyboostedhonda27
      @rickyboostedhonda27 7 месяцев назад

      Do not quote me on this, but if I where I guess I’m guessing he feeds it more fuel some how. Maybe he gets a larger FMU or a larger fuel pump. because e85 on a stock tune would probably lean out, so he might just raise up the fuel pressure ALOTTT for it to be somewhat reliable.

  • @JimPropert
    @JimPropert 9 месяцев назад

    Thank you for sharing your knowledge on these.

  • @Slimerancher69
    @Slimerancher69 9 месяцев назад

    How exactly are you running on e85 id love yo know all of your secrets i wanna push my to the limits thank you i have many spare engines and parts

    • @MrPhukyew
      @MrPhukyew 9 месяцев назад

      The naturally aspirated timing map on most cars that are unmodified will work for low boost on pump gas because it will be such a conservative tune. But if you want to raise the boost beyond that safe limit then you need ethanol in order to keep detonation away when you cannot modify the timing for the higher boost. You don't have to necessarily have a flex fuel vehicle to run e85 but you have to be aware of the ethanol content of your fuel which is why I keep on saying e85 instead of "flex fuel". Some gas stations that sell flex fuel are known to have the super high ethanol content of e85 most of the time rather than letting it flex down to a lower level. When you have a consistent enough fuel supply for this to happen you can just put in the right size injectors to meet your fuel needs with e85 and then raise your boost. You will not be able to run pump gas afterwards unless you put smaller injectors back in again. Being completely untunable like that and trying to run power levels like this I also had to bend the rules of the internet a little bit further. The computer judges your load level calculation based upon the amount of vacuum being read by the map sensor and decides how much fuel you are going to need based on a calculation of that versus RPM. When I take out the one bar map sensor and put in a three bar map sensor now the computer will not read full load until I am at 28 plus PSI boost. But wait there's more, the factory fuel pressure on these cars is 43 to 48 psi roughly and I get rid of the factory regulator and I put in my own fuel pressure regulator that's adjustable and I turn it down to about 20 PSI fuel pressure. Afterwards I add another part to the fuel return line which is an FMU or a "fuel management unit" What this piece does is raises the fuel pressure by 4 PSI per 1 psi of boost. This allows me to take out the factory 21 lb injectors and install 96 lb injectors. After that I put in some colder spark plugs and gapped them at about .020 and we've got a good drivable car with lots of power. The car in this video I think had a 2 bar map sensor and 550cc injectors because it ran less boost than my personal car. But still set up the same.

    • @Slimerancher69
      @Slimerancher69 9 месяцев назад

      @MrPhukyew awesome man thank you for all the info I greatly appreciate it. Your legend will live on from me I don't want to run megasquirt I want to really push the stock ecu. I'm using a SPA adjustable fmu at the moment and it works great I'm just ready to step it up but with only 91 and stock timing I have a good feeling it'll pop sooner than later without e85 to be honest.

  • @GonzaloMagallon-t8h
    @GonzaloMagallon-t8h 9 месяцев назад

    does the 7mge injectors plug n play or do i need to modify the injectors to fit the stock rail?