![gunnerwolf](/img/default-banner.jpg)
- Видео 51
- Просмотров 83 586
gunnerwolf
Добавлен 19 июл 2006
Cheap Break Job 1 year update Rock Auto / partsavatar
front rotors - Ultra (coated)
front pads - Agna semi metallic
rear rotors - transit Warehouse
rear pads - transit Warehouse semi metalic
front pads - Agna semi metallic
rear rotors - transit Warehouse
rear pads - transit Warehouse semi metalic
Просмотров: 106
Видео
Alex and Violette Wedding Afternoon Full
Просмотров 8210 месяцев назад
Our afternoon wedding ceremony in Yantai
home made breaker bar
Просмотров 35Год назад
when your ratchet is too small and your pipe or breaker bar is too big, just add a socket and an extension.
What 5 seconds of working on your own car looks like
Просмотров 203 года назад
2014 Mazda 3. Rear parking brake caliper nut
Mazda 3 2014 manual transmission oil change
Просмотров 18 тыс.3 года назад
changing the oil in my manual tranny. Don't buy a pump! All you need is a hose and a funnel. Run the hose from the top of the engine bay into the oil fill hole. Stick the funnel on the hose and you're off to the races. I notice very little performance/oil difference with the fresh oil. I paid $19 per bottle from Benson's. Comment from 2STEPSAWAY below: "Take note that ANY Mazda past 2016 takes ...
Lady on fire reacts to Halo orchestra
Просмотров 784 года назад
Portrait of a lady on fire reacts to Halo orchestra
Furrow Orbweaver eats a Horse Fly on Wolfe island
Просмотров 674 года назад
Furrow Orbweaver eats a Horse Fly on Wolfe island
Clean and Polish Motorcycle Exhaust with Acid
Просмотров 4,2 тыс.4 года назад
Clean and Polish Motorcycle Exhaust with Acid
Removing 2014 mazda 3 trim and vents
Просмотров 4,2 тыс.5 лет назад
Removing 2014 mazda 3 trim and vents
I'm still trying to locate the kick panel lol, i hqve an idea of which one it is but haven't seen any videos that confirmed it
Bolt size?
how many litres of fluid?
Fill amount should be 1.7 liters
wat een heerlijk beest
Alex, I’m crying as I watch. I want to make a promise to both of you. Call when ever you need support we will be there. ❤️
Super cute! So glad you had such a lovely wedding and found such an amazing partner to walk though life with 💖
I am so proud of the man you have become Alex! You truly showed your caring side. You are a beautiful and amazing couple and I can’t wait to see what you accomplish together. Violette you radiate love. I welcome you to this family with an open heart and embracing arms. CONGRATULATIONS!
I thought I'd always be a Labrador man my entire life until my sister got herself a Chesapeake Bay, so, I in turn Needed MY OWN retriever so I went off the beaten path and, after research, breed pedigree and my gut wound up With my own lil' Toller that I have to admit is trying her damnedest to keep up with the Chessie. (Give her a few more months.) But Aileen/Taffy's a natural jock, sweet as can be and is already running circles around every pooch at the park. It certainly doesn't hurt that she lives only a few blocks away from lake Michigan and I train myself. A match made by big Pappa Posiodon, she is my aqua princess. -Tim "The Fresh Prince of Darkness" Ficker
Do you know how to tell if the fluid level is low or high? Because only the automatics come with a dipstick
Sorry I didn’t watch all the way to the end So if you fill up to the full cap it’s not possible to overfill on a level surface?
@@abeklassen6716 that's right. More info in the description
Okay I used royal purple 75w-90 but it didn’t say gl-4 or gl-5 on the bottle anywhere. Is my transmission gonna end up shitting itself?
Where is the tuner for this car I working on a Japanese version need to put a fm expander to get the local stations it have a DVD type player below the ac controls I wonder if the tuner is in that unit
Doing brakes you have unlimited options. If you have no room to fit a breaker bar. Turn the wheel. If you’re doing rear brakes and need the breaker bar Jack the car up and go from underneath. I’ve done the socket trick plenty. But it’s also a good way to bust your knuckles. If you’re really in an awkward spot stick the box end of a wrench on your ratchet. Use a hammer on the ratchet.
Congratulations 恭喜❤
Congratulations Alex and Violette!
Great video. Did you notice any improvement in shifting?
I feel like it's been slightly more difficult to push into gear especially in the winter. Did this years ago and the trans still feels exactly the same. If your thinking of doing it you don't need a pump. Just run a hose from top into the fill hole and pour in with a funnel
@@gunnerwolf thanks for the reply. I got this done at a shop I don't completely trust. So I'm not sure if they actually did it. But good to hear it's not much difference.
We should get another truck trailer from my coworker Mrs. L I’ll get another truck trailer has her Christmas present and a trip to Fiji
Is there an oil filter that needs to be changed as well?
Nope. If you decide to do an oil change you can more easily fill from the top rather then the bottom with a pump. Check out the details I wrote under the video
I’m trying to get all the chrome accents out to paint then but I can’t figure out how
Same!
brought tears to my eyes thinking of my old toller who would do almost exactly this. Remember to cherish every moment.
Yup. Tollers are cray-cray. And we love 'em for it.
Lovely dog! We also have a toller, but ours is shy and not vocal at all =D. Ours only barks when he hears "intruders" (neighbours walking by our front door, etc.)
Are the pipes chrome or stainless steel ?
Stainless
@@gunnerwolf Thank you
this saved me the frustration on how to fix one of the 'vertical' blades that had gotten lose from the 'track' that moves them right and left. I had been trying using my fingers, pens, needle nose pliers with no luck. this video helped me remove it and able to work on it from behind the vents. when the bezel reaches the right vent I used a microfiber towel that I had in the glove compartment and used that to cover my fingers and make it easier to pull out the bezel. thanks for this!
Nice job my vato
Was the transmission whining on the road?
Nope
@@gunnerwolf damn...my 18 2.5 touring manual sounds like it whines whenever gas is applied when in gear
Hopefully it's a bearing, belt, or something else instead of the tranny
@danielserrano2801 Did you ever find anything out about this? My 2016 Mazda2 1.5 has a whine in 2nd.
@@danielserrano2801 My 2.0 (europe spec) also has that noise but only when cold and usually after rain or damp conditions.
How's your car doing with the 75W90? I can't seem to find the 75W80 at my local auto shops.
What year car do you have? Apparently using the wrong oil can be catastrophic
@@gunnerwolf 2014
I found Red Line 75w80 at Walmart(online) and Amazon.
@@toke110 mine's been running pretty well (same as before oil change). I don't think there would be much of an issue with viscosity being different using a non spec oil, but there may be material compatibility issues... I'd keep looking for the correct oil. Maybe an expert can provide insight. If all else fails... Maybe u can get some from the dealership
@@ericj6559 yeah, I was hoping I'd find it in local auto shops. Ordered it from Amazon
My 2016 says 75W80 (GL-4) but it does seem hard to find compared to 75W90. I do like this car but one complaint is that when it get's below -18 Celcius it's noticeably harder to shift and it doesn't improve much even when the car is well warmed up.
You can buy it at the Mazda dealership. Cost me about $35 for two quarts.
How many miles was on the Mazda when you changed it
Something like 50 0000 miles
Take note that ANY Mazda past 2016 takes 75W-80 GL4 in its manual transmission. If you put 75W-90 it will be hard to shift and the excess sulfur in 75w90 will cause corrosion to the brass sleeves in the gearbox. Take it from me - I learned the hard way!
Thanks! I'll add a note in the details
cant find 75W80
@@a3onx280 really? Where do you live?
@@a3onx280 look at Shell Syntrans or MPM if you live outside the US
Not that "excess sulfur" is a product of being a GL-5 oil. GL-4 is sulfur safe. The weight is another issue. There are several good alternatives. Redline MT-L. MT-LV, MT-80 to name some.
Transmission oils GL4- GL5 explained. ruclips.net/video/Z7NpsMZ9pBQ/видео.html
Great video, I miss those days…
I do to... Sometimes.
@@gunnerwolf Agreed…
I bought a second-hand Mazda 3 2015 where the infotainment was added later on by the previous owner. It seems to be working well with the buttons but the digital touchscreen doesn't work, so I'm gonna try this solution. In the meantime, how do I use Bluetooth without the touchscreen functioning? I cannot find a way through the buttons. Also, I tried resetting the infotainment by pressing and holding for 10sec the Nav + Return + Mute buttons, but it doesn't do anything. Same when I tried different combinations of buttons for 10sec. Does anyone know why, and how I can reset the infotainment differently? Thank you.
I don't really understand your problem. Could you post a video showing what you just explained?
It’s about to be all over peoples recommendations lol. Pretty awesome though!!
That grey thing its not the amp, right?
i did a srickerbomb trim for my interior, this is the best way to do it. try an not use tools either or you can jack up your stuff bad. little finesse goes a long way
Did you use a new washer
Nope. And I haven't noticed it leaking
No need unless there's visible deformation, leaks or corrosion on the washer
I did disable the touch screen just like he instructed and I no longer have the ghosting problem. Thanks for the help !
How many miles was it when you replaced it
120,000 km
In EU the manual says 180.000 km but I changed at 140.000 km
Change it every 40,000 miles. The manufacturer recommendation for transmission fluid is crap.
Thanks, man! Your video helped me a lot!
I have a 2015 madza 3I sport hatchback what are the speaker output for left and right positive and negative I'm installing a LOC upgrading the door speakers and a 4 channel amp with a sub amp and the jl audio twk-88 please help me
Thanks! Solved my problem..
First!
Sorry, it seems that the audio and video aren't lined up. One side is already treated, one side is not.
Thanx homez. So far so good
Thanks for posting. I had used a similar video (ruclips.net/video/AeECvEHTKlE/видео.html) to do the ribbon cable fix, which really doesn't require separating the touch screen sensor from the LCD assembly. Finally though, the cracks in the sensor spread so badly that I couldn't make out parts of the screen, so I found a new TS sensor on EBAY for <$100. Your video is the only one I could find that showed the sensor separated from the LCD though you didn't show how to do that. There are four clips on the pastic bezel that hold the metal bracket in place. Getting that off was hard... then easy. First take the four screws off that hold the bracket to the circuit board. Then I tried a direct assault on the clips, but that didn't work. Once I tried to get under the bezel with a small flat head, it popped right off. From there, I needed a heat gun to melt the glue holding the glass to the bezel. Installation was pretty easy from that point on.
Hi my infotainment only media doesn't play. I can connect the bluetooth but I cannot turn radio on
How did you solve this pls
Do you have the part number for the touch screen only, mine its scratched because the heat, and I need to replace it, the display it self it working good, thanks
You can find part numbers by googling "Mazda parts", or you can call the dealership and ask for a part number
You saved me so much money!!! Holy shit, 4 videos, all different people, saved me a shit ton of money!
Thanks from Russia bro)
Hey bro ! Do you have Problem with the a/c ? Don’t cool or switch no move good? Thanks for the video, you save me! The dealer cost is $1400 for the CMU
Glad I could help! Sorry, I don't know anything about the a.c. switch
Mine went all crazy too. Open the glove box I believe, you will see that the ac knob is supposed to be attached to some shitty plastic wheel that goes off its track. Its not an easy fix at all. Cost me $50 and 2 mechanics to figure out. What a shitty design.
Can I add infotainment to a 2014 Mazda 3 with just the regular radio & bluetooth?