Видео

Not support 1080P，2G 32G Memory radio support connect CVBS480P rear camera，4G 64G Memory radio support connect CVBS480P and AHD 720P rear camera！

@@Grandnavi Thank you, is it the same with the front camera?

you can try 000000/123456/8888

Hello, VW car has a distinction between high and low configurations (depending on whether there are buttons on your car's steering wheel). Those with buttons are considered high configurations, while those without buttons are considered low configurations. The power cable connections for these two configurations are not the same. If your cable is connected incorrectly, radio may not shut down. Please refer to the advertisement image of your purchased radio, which will have connection instructions. If you are unsure, you can contact our email（grandnavi@163.com） for consultation. Please note that you have been contacted on RUclips. Regarding the connection issue with Carplay, please check if you have connected the reverse cable of the radio. It has 2 antennas on top that can enhance Bluetooth and WiFi signals, so this cable must be connected!

What you mean by 'not working' is that the button cannot be pressed? Or is there no functional response after pressing the button?

@@Grandnavi j'appuie mais pas de réponse, tout les boutons pareil

@@saidzegzaoui9872 It requires resetting the button function. You can find the physical button learning or panel button setting function in the radio settings to reset the button function. We are not sure what system your radio is using and cannot provide you with accurate operating steps. If you can send us pictures of your radio system information to our email, we can teach you the specific operating steps! Our email address is: grandnavi@163.com

@@Grandnavi 23:10 Version Android: 13 RAM: 4,0G ROM: 64G ☑ Nombres de coeurs CPU: 8 ◉ Plate-forme système: UIS8581A Version CAN: Raise->VW/Skoda/Seat->VW-SKODA_R01 ☑ VersionProtocole CAN: 5.0.1.20240508 Version Système ZA_2024.05.15.16_6_4426 Version MCU: ZA001-23.12.07_409 ☑ Résolution: 1024*600_WD070SKM30AE-Q9 Informations TP: GT9xx_1024x600 03/08/2024 23:10

@@saidzegzaoui9872 car setting-factory（password 000000）-Physical Learning，Configure the button according to the function you need, long press or short press the button until the symbol on the radio turns red, which means the button configuration is successful!

If the knobs on both sides are stuck, you can simply pull out the knobs and reinstall them. If the button on both sides is stuck, you need to try disassembling the button and reassembling it

@@Grandnavi auto radio android neuf !! J'ai fait la restauration mais ça n'a pas marché !!

@@Grandnavi pas de solution ! Quoi faire. Je veux une solution. Merci

¿Bueno, ¿ en qué puedo ayudarlo?

You can directly cut the reverse cable on the power cord, which is usually marked as Back or Reverse.If you are unable to confirm which cable it is, please contact the customer service of the purchased store to inquire!

@@Grandnavi solved! thanks...

@@sirio787 You are welcome😁

​@@Grandnavi if you cut the cable still works the parking sensors? i mean it shows on the display the distance and beeps if too close?

@@vMihai90 The parking sensor can work, this is your original car function, it is controlled by Canbus and is not related to the reverse cable!

Hello, can you directly contact the customer service of the store you purchased to inquire? Because the canbus information needs to be confirmed by checking the pictures and also by checking the system information of the radio!

You need to always keep your phone's Bluetooth and WiFi on, so that when your phone approaches the radio and Bluetooth pairing is successful, it will enter the Carplay interface

@@Grandnavi Sometimes i am in the connecting screen waiting for 5 minutes + till it connects sometimes i does not connect and sometimes it connects. Do you know how i can fix this that it connects quickly? Thx

@@dinozurrer5058 Hello, based on the problem you described, it seems that the pairing between Bluetooth and WIFI is not good, which is causing Carplay to not be able to enter quickly. Have you connected the reverse camera cable behind the machine? There are 2 antennas on this cable that can enhance Bluetooth and WIFI signals, and it must be connected!

​@@Grandnavi have the same problem.Have the reverse camera cable and wi fi and bluetooth always on and doesent connect.is there any options that we have to enable or something?

@@vMihai90 Do you mean carplay/Android auto cannot connect?

Hello, you can set the playback speed of the video. You can choose to play it at 0.75 or 0.5 times the speed. I hope it can help you!

@@Grandnavi thank you much better!

Hello, the factory has added a seven color button light function to the newly produced radio. If you want to fix the color of the button light, please open the Color app and long press the circle in the middle for about 5 seconds. After releasing your finger, the color of the button light will be fixed. At this point, you can change the color of the button light by clicking on other colors to set your preferred color. If you want the button light color to change, you can press and hold the circle in the middle for about 5 seconds again, and the button light color will automatically change. If you would like to know the specific operation video, please find our store in your order and contact us. Thank you!

@@Grandnavi I have same problem but version 4/64 don't have color app, how change only one color?

@@user-dz8uy6sn8c you can use the following path to adjust the button color: Car settings-factory（password 000000）-LED adjust entrance enable(ON)，Then go to Display-illumination color-LED Animation（ON），which will enable the adjustment of the button light color.

It does not support remote control, but you can download an app on your phone so that you can control playing music through your phone!