Hello, I have this exact radio in a Skoda Fabia 2013 and there is no sound… you need to buy something or replace some VW-Skoda cables, maybe the pins are different?
Hello, the sound is not controlled by Canbus. If your car does not have the original car amplifier, please check if there is a problem with your car horn. If your car comes with an original car amplifier, the radio is not supported
@@Grandnavi The car does not have an amplifier, this is the basic version. the radio has no sound after connecting. I tried Bluetooth, CarPlay, USB but there is silence
@@Swiss881 Please first check if your original car's main unit can make normal sound when connected. Additionally, please do once factory reset operation on the radio
Hello, VW car has a distinction between high and low configurations (depending on whether there are buttons on your car's steering wheel). Those with buttons are considered high configurations, while those without buttons are considered low configurations. The power cable connections for these two configurations are not the same. If your cable is connected incorrectly, radio may not shut down. Please refer to the advertisement image of your purchased radio, which will have connection instructions. If you are unsure, you can contact our email（grandnavi@163.com） for consultation. Please note that you have been contacted on RUclips. Regarding the connection issue with Carplay, please check if you have connected the reverse cable of the radio. It has 2 antennas on top that can enhance Bluetooth and WiFi signals, so this cable must be connected!
hi, when vehicle is on reverse the radio stop and try to connect with the rear parking camera (and i have no camera installed) . how can i turn it off in order to continue listen the radio? thanks
You can directly cut the reverse cable on the power cord, which is usually marked as Back or Reverse.If you are unable to confirm which cable it is, please contact the customer service of the purchased store to inquire!
The steering wheel buttons are controlled by canbus. 1. Please connect all canbus cables correctly (please refer to the advertising pictures on the product purchase page for cable connection) 2. If the canbus cables are fully connected, please go to Settings - Canbus Settings to check if the car model is selected correctly! If you are not sure, please contact our official WhatsApp (you can find it inside the package card)
My Carplay doenst work that good i have to click every time that when i torn on the car that inam connected automatically how can i change it that it wil connect automatically?
You need to always keep your phone's Bluetooth and WiFi on, so that when your phone approaches the radio and Bluetooth pairing is successful, it will enter the Carplay interface
@@Grandnavi Sometimes i am in the connecting screen waiting for 5 minutes + till it connects sometimes i does not connect and sometimes it connects. Do you know how i can fix this that it connects quickly? Thx
@@dinozurrer5058 Hello, based on the problem you described, it seems that the pairing between Bluetooth and WIFI is not good, which is causing Carplay to not be able to enter quickly. Have you connected the reverse camera cable behind the machine? There are 2 antennas on this cable that can enhance Bluetooth and WIFI signals, and it must be connected!
@@Grandnavi have the same problem.Have the reverse camera cable and wi fi and bluetooth always on and doesent connect.is there any options that we have to enable or something?
Hello, the factory has added a seven color button light function to the newly produced radio. If you want to fix the color of the button light, please open the Color app and long press the circle in the middle for about 5 seconds. After releasing your finger, the color of the button light will be fixed. At this point, you can change the color of the button light by clicking on other colors to set your preferred color. If you want the button light color to change, you can press and hold the circle in the middle for about 5 seconds again, and the button light color will automatically change. If you would like to know the specific operation video, please find our store in your order and contact us. Thank you!
@@ОлексійКовальчук-л6ш you can use the following path to adjust the button color: Car settings-factory（password 000000）-LED adjust entrance enable(ON)，Then go to Display-illumination color-LED Animation（ON），which will enable the adjustment of the button light color.
@@joeandaya6975 Please check if you have connected the camera cable? This cable must be connected. It has 2 antennas that can enhance the Bluetooth and WIFI signals.
please tell me what settings to do for the can activation, my car is golf plus 2007! He sees the doors open, but the parking sensors and the climate control display nothing.please seend my corect setings.thanks ! 4gb 74 my radio
Hello, can you directly contact the customer service of the store you purchased to inquire? Because the canbus information needs to be confirmed by checking the pictures and also by checking the system information of the radio!
@@arturotheurelcuevas2970 1. What system platform is your radio on? 2. Please check if the radio is connected to the complete CAN bus cable and if the radio CAN bus is set. The steering wheel button function is controlled by Canbus
We don't have a radio for this platform, so we're not sure about its settings and functions. Please contact the store where you purchased the radio to inquire!
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Hello, I have this exact radio in a Skoda Fabia 2013 and there is no sound… you need to buy something or replace some VW-Skoda cables, maybe the pins are different?
Hello, the sound is not controlled by Canbus. If your car does not have the original car amplifier, please check if there is a problem with your car horn. If your car comes with an original car amplifier, the radio is not supported
@@Grandnavi The car does not have an amplifier, this is the basic version. the radio has no sound after connecting. I tried Bluetooth, CarPlay, USB but there is silence
@@Swiss881 Please first check if your original car's main unit can make normal sound when connected. Additionally, please do once factory reset operation on the radio
Hello, I have the vw7037 radio.
It doesn’t shut down by ignition.
And the car play doesn’t works with Bluetooth with my iPhone
Hello, VW car has a distinction between high and low configurations (depending on whether there are buttons on your car's steering wheel). Those with buttons are considered high configurations, while those without buttons are considered low configurations. The power cable connections for these two configurations are not the same. If your cable is connected incorrectly, radio may not shut down. Please refer to the advertisement image of your purchased radio, which will have connection instructions. If you are unsure, you can contact our email（grandnavi@163.com） for consultation. Please note that you have been contacted on RUclips.
Regarding the connection issue with Carplay, please check if you have connected the reverse cable of the radio. It has 2 antennas on top that can enhance Bluetooth and WiFi signals, so this cable must be connected!
How to change color, on za001?
hi, when vehicle is on reverse the radio stop and try to connect with the rear parking camera (and i have no camera installed) . how can i turn it off in order to continue listen the radio? thanks
You can directly cut the reverse cable on the power cord, which is usually marked as Back or Reverse.If you are unable to confirm which cable it is, please contact the customer service of the purchased store to inquire!
@@Grandnavi solved! thanks...
@@sirio787 You are welcome😁
@@Grandnavi if you cut the cable still works the parking sensors? i mean it shows on the display the distance and beeps if too close?
@@vMihai90 The parking sensor can work, this is your original car function, it is controlled by Canbus and is not related to the reverse cable!
My side buttons as well as volume nobs don’t work after factory reset what can I do to fix this?
Are you referring to the buttons on the radio? Or is it your car steering wheel button?
I have a passat cc 2009 and the steering wheel buttons don’t work. What can i do?
The steering wheel buttons are controlled by canbus. 1. Please connect all canbus cables correctly (please refer to the advertising pictures on the product purchase page for cable connection) 2. If the canbus cables are fully connected, please go to Settings - Canbus Settings to check if the car model is selected correctly! If you are not sure, please contact our official WhatsApp (you can find it inside the package card)
My Carplay doenst work that good i have to click every time that when i torn on the car that inam connected automatically how can i change it that it wil connect automatically?
You need to always keep your phone's Bluetooth and WiFi on, so that when your phone approaches the radio and Bluetooth pairing is successful, it will enter the Carplay interface
@@Grandnavi Sometimes i am in the connecting screen waiting for 5 minutes + till it connects sometimes i does not connect and sometimes it connects. Do you know how i can fix this that it connects quickly? Thx
@@dinozurrer5058 Hello, based on the problem you described, it seems that the pairing between Bluetooth and WIFI is not good, which is causing Carplay to not be able to enter quickly. Have you connected the reverse camera cable behind the machine? There are 2 antennas on this cable that can enhance Bluetooth and WIFI signals, and it must be connected!
@@Grandnavi have the same problem.Have the reverse camera cable and wi fi and bluetooth always on and doesent connect.is there any options that we have to enable or something?
@@vMihai90 Do you mean carplay/Android auto cannot connect?
I just installed the radio but the buttonlights keep changing colour. What to do?? I tried the colour app but it doesn't work
Hello, the factory has added a seven color button light function to the newly produced radio. If you want to fix the color of the button light, please open the Color app and long press the circle in the middle for about 5 seconds. After releasing your finger, the color of the button light will be fixed. At this point, you can change the color of the button light by clicking on other colors to set your preferred color. If you want the button light color to change, you can press and hold the circle in the middle for about 5 seconds again, and the button light color will automatically change. If you would like to know the specific operation video, please find our store in your order and contact us. Thank you!
@@Grandnavi I have same problem but version 4/64 don't have color app, how change only one color?
@@ОлексійКовальчук-л6ш you can use the following path to adjust the button color: Car settings-factory（password 000000）-LED adjust entrance enable(ON)，Then go to Display-illumination color-LED Animation（ON），which will enable the adjustment of the button light color.
I have installed the carplay. But can't connect to WiFi??
@@joeandaya6975 Please check if you have connected the camera cable? This cable must be connected. It has 2 antennas that can enhance the Bluetooth and WIFI signals.
I have problem whith de steeringwheels control
You need to set up the steering wheel button from the head unit. That's how mine I did mine .hope that's helps
please tell me what settings to do for the can activation, my car is golf plus 2007! He sees the doors open, but the parking sensors and the climate control display nothing.please seend my corect setings.thanks ! 4gb 74 my radio
Hello, can you directly contact the customer service of the store you purchased to inquire? Because the canbus information needs to be confirmed by checking the pictures and also by checking the system information of the radio!
I have a problem whith steeringwheel controls
@@arturotheurelcuevas2970 1. What system platform is your radio on?
2. Please check if the radio is connected to the complete CAN bus cable and if the radio CAN bus is set.
The steering wheel button function is controlled by Canbus
promo sm
Luana m.
How to change color on ZA002?
We don't have a radio for this platform, so we're not sure about its settings and functions. Please contact the store where you purchased the radio to inquire!