MyWeekend
MyWeekend
  • Видео 49
  • Просмотров 73 868
ПРЕНАСЯМЕ ОЩЕ КАРАКУДИ в малко язовирче
Два дни преди забраната, решихме да повторим това, което направихме на последния риболов. Времето този път беше чудесно. Рибите са били много активни сутринта, а следобед, когато отидохме ние, беше по-слабо. Въпреки това, се получи добър риболов и прехвърлихме хванатите риби в другия водоем.
Просмотров: 175

Видео

Пуснахме каракуди в малък язовир. Ще успеем ли да го зарибим?
Просмотров 767Год назад
Бърз риболов на каракуди след работа. Целта беше да хванем риби, които да пренесем в едно микроязовирче.
Ноемврийски айляк! :)
Просмотров 165Год назад
Кадри от един спокоен ноемврийски уикенд. Малко, но от сърце :)
Gopro 4 Time and Date reset issue FIXED!
Просмотров 89Год назад
In this video I will show you how I fixed the RTC (Real Time Clock) on my GoPro4 Black cameras. It is caused by the aging of a supercapacitor that looks like a small watch battery. Over the years, its capacity has decreased to the point where it can no longer keep the time and date. After replacing it, you no longer need to set the clock every time. And you won't have many files with the same d...
Случаен риболов на мръкване. Попаднах на лакоми костури - ГОЛ СЛЕД ГОЛ!
Просмотров 840Год назад
Спрях да проверя дали са активни костурите в този крайпътен язовир. 20-30 минути преди мръкване уцелих страхотна активност и почти нямах празна проводка, но се стърмни и трябваше да тръгвам. Рибите, макар и дребни, гонеха примамката доста настървено и ми донесоха удоволствие от риболова. Единственото нещо, което ме отврати, е превърнатия в сметище бряг на язовира. Навсякъде, където може да се с...
С болонеза на Марица! Коледни скобари, морунажи и кефали!
Просмотров 522Год назад
Кратък риболовен излет по празниците. Времето беше разкошно, рибите кълвяха чак до тъмно и се получи добър риболов с комични елементи и неловки ситуации, заради липсата на кеп, или по-точно неизползването му! :D Такъми - akulataflyfishing.com/
Baofeng BF-888s OPEN SQUELCH ISSUE FIXED!!!
Просмотров 9 тыс.Год назад
This is common problem with these radios - after reprogram the channels and frequency range, the radio not working correct anymore. Squelch is always open and no TX power. Fortunately, this isn't hardware problem and can be fixed. In this video I'll show you how to do it. ( There is a least two versions of Baofeng BF-888s. If your radios are different, there is no 100% guarantee.) www.miklor.co...
FAKE 30TB SSD from Aliexpress! Stay Away From It!
Просмотров 10 тыс.Год назад
Fake "30TB Portable SSD". No SSD inside, this is just 64GB MicroSD card in USB Card Reader. Really disappointing…
Отидохме на труднодостъпен водоем, попаднахме на странни костури без черти! Perch without stripes!
Просмотров 475Год назад
С моя приятел Тодор решихме да пробваме костура на отдалечен и доста труднодостъпен водоем. Костурите бяха дребни, но много и буквално не даваха на примамката да пропадне! По-интересното обаче беше, че половината риби не са с типичната окраска за костура, а с една надлъжна черта! Дали това е следствие на относително затворената популация или има друго обяснение? Ще ми е приятно да споделите в к...
За КОСТУРИ на яз.Тракиец. Подобрих си рекорда!
Просмотров 1,4 тыс.Год назад
Кратък риболов на костури след работа. Имах късмета да хвана трофеен костур. Основно лових с Fiiish Mud Digger, по някое време смених с MayFly, понеже рибите леко издребняха. CortX-чето на ForMax се справи страхотно с големия костур, беше яко адреналин, но имаше доста колеги на язовира и трябваше да пазя тишина.. :D Music: Over You by Atch SoundCloud: bit.ly/AtchSoundCloud Spotify: bit.ly/AtchS...
Водно-къмпингарски уикенд на Тракиец
Просмотров 582 года назад
Обичайни съботно-неделни занимания на обичайното място...
Усещане за море. С DJI от Резово до Велека
Просмотров 1392 года назад
Вечерна разходка по най-южните части на нашето черноморие - Резово, плаж Силистар и устието на р.Велека.
Полет над Гарваница
Просмотров 912 года назад
Гарваница е сакрализиран в древността хълм от планинския рид Мечковец, намиращ се в крайните северозападни части на Източните Родопи, на територията на Община Минерални бани, област Хасково, на 569 метра надморска височина. Монолитните скали на възвишението Гарваница при село Горно Брястово доминират над околността и са връхна точка на голям мегалитен култов комплекс, който обхваща целия хълм и...
Baofeng BF-888S RF Power Test
Просмотров 24 тыс.2 года назад
Baofeng BF-888S RF Power Test
Открих място с хиляди кефали по Арда!
Просмотров 5 тыс.2 года назад
Открих място с хиляди кефали по Арда!
Има ли хищна риба в този малък водоем?
Просмотров 3,7 тыс.2 года назад
Има ли хищна риба в този малък водоем?
Събота, късен костурски следобед...
Просмотров 2432 года назад
Събота, късен костурски следобед...
Кефалчета на спининг
Просмотров 1962 года назад
Кефалчета на спининг
Риболов с каяк на яз.Студен кладенец
Просмотров 2932 года назад
Риболов с каяк на яз.Студен кладенец
FDK MULTI-750E
Просмотров 3883 года назад
FDK MULTI-750E
Аязмото край с.Тракиец и заслон Св.Ана
Просмотров 1773 года назад
Аязмото край с.Тракиец и заслон Св.Ана
Скалните ниши край с.Ангел войвода
Просмотров 1263 года назад
Скалните ниши край с.Ангел войвода
Село Орехово
Просмотров 1853 года назад
Село Орехово
Nebeska - Close To The Sky
Просмотров 1273 года назад
Nebeska - Close To The Sky
A Trip around Borovitsa Dam, Bulgaria
Просмотров 2813 года назад
A Trip around Borovitsa Dam, Bulgaria
Ordinary Saturday
Просмотров 613 года назад
Ordinary Saturday
Focusrite Forte repair
Просмотров 1,2 тыс.3 года назад
Focusrite Forte repair
Разходка до Сливодолското падало
Просмотров 584 года назад
Разходка до Сливодолското падало
Nature Time Lapse
Просмотров 134 года назад
Nature Time Lapse
It's just starting to rain (time lapse)
Просмотров 234 года назад
It's just starting to rain (time lapse)

Комментарии

  • @redjohn20001
    @redjohn20001 9 дней назад

    What programming software are you using?

  • @Elvisdukebox
    @Elvisdukebox Месяц назад

    Hi guys yes Moxton's in the UK are doing the same DO NOT BUY ANYTHING FROM THEM !!!!!!!!!!!!!!!!!

  • @hiren146
    @hiren146 Месяц назад

    Hi, thanks for the video, could you provide any details about the capacitor/battery you replaced, where did you get the replacement or what are the specs for it. Thank you.

  • @vnyeu
    @vnyeu 3 месяца назад

    Almost order. Thanks

  • @thanodthanos414
    @thanodthanos414 3 месяца назад

    Hello why is my bf888s is still not working. It has same frequency but when i press ptt the other radio just turns light on. But without sound

    • @MyWeekendChannel
      @MyWeekendChannel 2 месяца назад

      This is different issue, not like mine. Sorry...

  • @stephenedgecock
    @stephenedgecock 4 месяца назад

    i connect mine to a 1000w amplifier

  • @BlackVelvet446
    @BlackVelvet446 4 месяца назад

    Благодаря ти от сърце за помощта, приятелю. Той ми спести 2 уоки токита. Всичко най-хубаво. Thank you from the bottom of my heart for your help, my friend. He saved me 2 walkie talkies. All the best.

  • @luisarminana8141
    @luisarminana8141 4 месяца назад

    MUCHAS GRACIAS , ME HA FUNCIONADO-- so many thanks, its works

  • @jaroslawlewandowski6416
    @jaroslawlewandowski6416 5 месяцев назад

    Dziekuje ci przyjacielu jestes wielki :)

  • @Dudko_Budko
    @Dudko_Budko 5 месяцев назад

    Great, it works! Thank you 👍

  • @Nappi91
    @Nappi91 7 месяцев назад

    I followed the steps in your video and then used a clone file on Chirp to try to upload our frequencies onto the new 888s. My company has a licensed repeater for one of our channels. The radios will receive on the repeater channel but will not broadcast. Will this fix this issue? From what I have been reading they have been shipping this to the US with this ability disabled.

    • @VA_Outdoors
      @VA_Outdoors 7 месяцев назад

      Is this a ham repeater or not? What frequency you try to transmit? TX frequency ramge is 400-470 MHz I think...🤔

    • @Nappi91
      @Nappi91 7 месяцев назад

      @@VA_Outdoors 464.387500, Tone Mode: Cross, DTCS 654, DTCS Polarity NN, Cross mode: DTCS->, Duplex: +, Offest: 5.000000, Mode: FM, Power High. Also, after repeating this process it with a different radio seems to have the opposite effect and making the output of the radio extremely low after flashing with the 2019 repair file and then reloading our channels with Chirp on the non-repeater channels.

    • @VA_Outdoors
      @VA_Outdoors 7 месяцев назад

      @@Nappi91 The offset is +5MHz. 464.387500 + 5Mhz is above 470MHz. That is the reason you can't transmit. Try to change frequency to 462.387500 with same other setting just for test and it will transmit. And there is at least two versions of this radio and they may have a different settings...

    • @Nappi91
      @Nappi91 7 месяцев назад

      I tried to do this and it wouldn't work but when I changed the Freq back and it cleared the offset it was able to broadcast and not receive. I'll be honest I'm new to this and I thought just cloning the channels from our old 888s to the new ones should work but it hasn't. I do appreciate the help though.@@VA_Outdoors

  • @iamhamzarasheed
    @iamhamzarasheed 7 месяцев назад

    Thank you men 🙌🏻 you save my money

  • @vektordizajn6342
    @vektordizajn6342 7 месяцев назад

    Thank you

  • @arieldelossantos9825
    @arieldelossantos9825 7 месяцев назад

    GENIOOOOOOOOOOOOOOOOOOOOOO muchas gracias por el aporte, solucione el problema

  • @E1l2r3o4_YT
    @E1l2r3o4_YT 8 месяцев назад

    how do I fix mine that doesnt turn the light red when I press ptt?

  • @mariosciclunacuschieri693
    @mariosciclunacuschieri693 8 месяцев назад

    Sorry but the instruction video is confusing! At 1:10 you say 'frequency range is not correct'. How did you manage to wirite(and save) to file if range is VHF, but freq in list are UHF?? Also, from an empty file, in a second you bring up a filled in file with all the freq, without an explanation! Help me to follow maybe I'm doing something wrong here

  • @chestiitari9531
    @chestiitari9531 9 месяцев назад

    Hi! does it restart when you raise the output to max? i got it replaced (the same component), but now it does not work with only USB. Only with USB and AC . but when i put high output volume, it restarts, pc does not recognise it. Could it be the component or the the soldering?

    • @chestiitari9531
      @chestiitari9531 8 месяцев назад

      I see you are from Bulgaria. We are neighbours. How can i contact you for a repair?

  • @josemendoza5918
    @josemendoza5918 9 месяцев назад

    😊

  • @adeelahsan___
    @adeelahsan___ 9 месяцев назад

    Thanks

  • @josemendoza5918
    @josemendoza5918 9 месяцев назад

    Excelente

  • @SergeyBakhtamov
    @SergeyBakhtamov 10 месяцев назад

    Mine BF-888S showed 2.8W (High)/0.2W (Low) at 434 and 446 MHz.

  • @fixingthing
    @fixingthing 11 месяцев назад

    I bought a 8 TB ssd Which is very slow, did not open it but probably a micro sd card and reader inside. Do not buy.

  • @user-jm9sp9ll8r
    @user-jm9sp9ll8r 11 месяцев назад

    Дебил могут дешёвку покупать надо покупать нормальных магазинах

  • @radekz8035
    @radekz8035 11 месяцев назад

    thank you. What's a mess... :) So I had the same problem, and It solution solve it

  • @reggordon4982
    @reggordon4982 Год назад

    Yes, l received two of these inferior devices! It is supposed to have a 16TB capacity. Luckily, to have 100gb if that?

  • @stevenbudnick1252
    @stevenbudnick1252 Год назад

    Talking between cars is an unfair review. The car kills the signal. Please review outside of both cars not inside

  • @mansorhajidaud6192
    @mansorhajidaud6192 Год назад

    What is name for this program

  • @sergeyblinov2090
    @sergeyblinov2090 Год назад

    Спасибо тебе, Valeri!

  • @RelaxSleepSoundsStudio
    @RelaxSleepSoundsStudio Год назад

    That's great information. what was the capacitor spec please?

  • @user-kh7px6vj8r
    @user-kh7px6vj8r Год назад

    Здравей,хубаво видео. Защо казваш,че каяка не става за риболов? Аз имам омега но мисля да си взема каяк като твоя , че по бърз за оправяне и по лек. Твойто мнение? Успех в новият сезон.

  • @badd.syntaxx
    @badd.syntaxx Год назад

    @MyWeekend Hi, i wonder mine a Baofeng UV-S9 plus, everytime i tried to do a scan within uhf range. it always restart to vhf 130.000 any idea why? i have program it previously in chirp with radiodity uv-5rx3. possibly it broke the firmware.

  • @DIYjelah
    @DIYjelah Год назад

    888s software stuck on my pc

  • @artemiovaldez9157
    @artemiovaldez9157 Год назад

    I try to follow the instructions but it did not remove open squelch problem of my bf888s

  • @lehellaz
    @lehellaz Год назад

    Cool you have solved the big eastern problem, I was about to sell my radios, even though I really like them

  • @user-sg7xm6hs6z
    @user-sg7xm6hs6z Год назад

    magkaano ang baofing bf 888s

  • @HarryHamsterChannel
    @HarryHamsterChannel Год назад

    Very nice. thank you

  • @toxmaster1
    @toxmaster1 Год назад

    What is difference low and high power settings?

  • @MartinStoyanovStoyanov
    @MartinStoyanovStoyanov Год назад

    THANK YOU!

  • @HarryHamsterChannel
    @HarryHamsterChannel Год назад

    I couldn't read the scale. What is it?

    • @MyWeekendChannel
      @MyWeekendChannel Год назад

      There are subtitles. The whole scale is 5W and bf-888 power is approx. 1.2W

    • @HarryHamsterChannel
      @HarryHamsterChannel Год назад

      @@MyWeekendChannel Now I feel better about my 888 - based simplex repeater. (About a mile.) Thank you.

  • @RS-lo2zj
    @RS-lo2zj Год назад

    is that not fake because the iss is orbiting earth super fast and the walkie talkie wont be able to handle that

    • @MyWeekendChannel
      @MyWeekendChannel Год назад

      @@RS-lo2zj yes, that is possible. Anyone with a walkie-talkie on 145.800 can talk instead the ISS. But no one will hear it more than a few kilometers away :) And at the same time, so many people are listening and recording the ISS. There are no obstacles between the ISS and the ground, and the signal is strong wherever the ISS is visible.

  • @gokhanalefbeit
    @gokhanalefbeit Год назад

    Thank you! I've been dealing with this for a week.

  • @yv5jed
    @yv5jed Год назад

    Hello i am not clear how to write the file into the radio ,can somebody explain a little bit. Thanks

    • @MyWeekendChannel
      @MyWeekendChannel Год назад

      just download the file and open it in 888s software. Connect the radio with USB cable, select COM Port and press write. Did you watch the video?

  • @favorit25
    @favorit25 Год назад

    hello, I need a frequency on the first channel 446.00625. when i try to change it comes out 246.00000. how can i change it? Thank you

    • @MyWeekendChannel
      @MyWeekendChannel Год назад

      use CHIRP, not 888s software.

    • @favorit25
      @favorit25 Год назад

      what is CHIRP software? and where can i download? Thank you

    • @favorit25
      @favorit25 Год назад

      ​@@MyWeekendChannel 😉

    • @MyWeekendChannel
      @MyWeekendChannel Год назад

      @@favorit25 Download here: chirp.danplanet.com/projects/chirp/wiki/Download

    • @favorit25
      @favorit25 Год назад

      ​@@MyWeekendChannel I'm sorry but I can't handle it. Where did you get the movie file from? 2:15min

  • @user-xq2ly5kr8i
    @user-xq2ly5kr8i Год назад

    Окраската наподобява досущ на големоуст бас.

    • @MyWeekendChannel
      @MyWeekendChannel Год назад

      Да, някаква хоризонтална черта. Но без черната точка на гръбната перка - при баса я няма. 😊

  • @ivank9
    @ivank9 Год назад

    Колега, това на Тракиец ли е?

  • @Marcschiller_2003
    @Marcschiller_2003 Год назад

    Thank you, You saved me from throwing myself off a building 🤣

  • @gerhardgroenewald5755
    @gerhardgroenewald5755 Год назад

    Thanks one billion times - 888s.exe is junk - easy to mess up. THIS IS THE ONLY SOLUTION AND IT WORKS . GET THAT .480 FILE !! IT IS MAGIC

    • @MyWeekendChannel
      @MyWeekendChannel Год назад

      I am happy that helped! After that issue, I use only CHIRP. I have many different radios and never had a problem with CHIRP.

  • @hackermadafuckaa8965
    @hackermadafuckaa8965 Год назад

    Shit, i was just about to buy it. Thanks bro

  • @a.j.m8736
    @a.j.m8736 Год назад

    I've better deal! I paid for 16 tb ....I got 62.53 Gb.... made in Taiwan!....Yeeep bro I wish to look before on YT...

    • @user-hi6ds7lt9j
      @user-hi6ds7lt9j Год назад

      bro this is not e-waste made in taiwan this is from china