Видео

I’ll have some suspension stuff coming next.

💯💯💯

Fantastic!

It’s a blast!!!

What?

If your pump is pumping, I would look at your carb then. Has it been disassembled and cleaned recently? Is you card jetted properly?

@@MikesMiniMotors I cleansed out the carb and jets. Replaced fuel filter. Ordered fuel pump, coil and spark plug, and air filter. Hopefully that’ll fix it. It start but bogs when I use accelerator. I cleaned the vacuum diaphragm on carb and inside. If I plug the other end of the vacuum hole from Carb with me finger, it’ll rev up. So I think it’s the vacuum in the old air filter and worn out air box.

@zackaryfootit2853 sounds like it could be a vacuum leak too. I’d check all your hoses are connected and not cracked.

@@MikesMiniMotors yes did that and replaced some hoses with one from the parts ruckus that were better. Also swapped out the old dirty gas tank for a cleaner one.

No, you wouldn't be able to use an electric ruckus converstion on the Metro (or at least without custom work). The rear frames are completely different.

DM me on IG. instagram.com/mikes.mini.motors/

You’ll love it, if you get one!

I got it from GoPowerSports. www.gopowersports.com/fully-adjustable-motor-plate-small-block/

I wouldn't cu thte frame, uness you plan to reinforce it again. You may need to look at how you are mounting your engine. I believe the original chain was #35, but I don't remember for sure.

I got it from WeBike in Japan. japan.webike.net/products/2024509.html

Thanks! 👍

👍👍👍

😁😁😁

I never had any issues. When Brandon rode with them on, he said he would have rotated them one more spot out if it was his bike.

Thanks! 😊

The link to purchase it is the description.

It depends on your engine. On the Predator 212's that I use, I believe it is a 5/16” - 24 bolt.

Are your brake light and running light wired backwards? Sounds like a possibility. I would start checking your wiring with a multimeter.

@@MikesMiniMotors what exactly should i be checking for? sorry i’m new to electrical and i swapped them out for each other and it doesn’t turn on at that point, if i leave the brake light unplugged the running light is perfect but if i tap the brake light onto where it’s supposed to go it starts flashing how it’s supposed to but im not even pressing the brakes nothing happens handle so am i missing a relay or something?

also, i’m not coming from factory i had bought the bike with an aftermarket taillight with similar sequential and brake light flashing function and it was fine

I do not sell them. I got mine from gopowersports.com

The engine hanger mount I believe is the same, but the rear frames are different.

Nice! Hope you enjoyed it!

😁😁😁

The black piece is the OEM check valve. I don’t have the pulsar unit, as my fuel pump is ran off the OEM ECU.

I got it from GoPowerSports. Brake Assembly - www.gopowersports.com/minibike-hydraulic-brake-system/ Bracket - www.gopowersports.com/mini-bike-hydraulic-brake-caliper-bracket/

You would have to check with your local laws to know if it’s an issue or not. So far I haven’t had any issues in Montana, Washington, Oregon, and California. I’m not saying it’s legal in any of the areas, just I haven’t had any problems.

@@MikesMiniMotors does it stop flashing and go solid or is it just continuous flashing?

Continuously flashes while the brake is held.

Unfortunately, I already offloaded all the old Metro parts. Have you checked Partzilla for what you need?

Thank you! 😁

Thanks! I got lucky on this one!

@@MikesMiniMotors Man I thought I got lucky the other day when I picked up a 139qmb with 50 miles on it for $100. $100 for that Honda is a steal. I can't wait to see what you do with this bike.

Thanks! Me too! 😂

Thanks!

They are way better then cheap knock-offs or crappy vacuum pumps...

@@MikesMiniMotors this dudes an idiot

Of all my bike and as long as I have had them, I have to replace only this one... 😄😄😄

Me

It's a Chase Harper one I got from Amazon: amzn.to/3Wn8xAF

Glad you liked it, Roy! 👍

Thanks, Spencer!

The gy6 engine mount I used is not available anymore, I believe. You can get the one that is similar from The Ruck Shop though. theruckshop.com/product/trs-gy6-extension-mount-kit-fatty-gy6-solid-12x8-10x8-or-12x7/

Front wheel is 12x4 and rear wheel is 12x8

My black Metro will become a MetRuck. Just need the $$$ to do it.

I’ve really liked my GY6! 😁😁😁

Yeah, just the stock one.

I messaged you back on IG. 😁

Yeah, you can add a side kick stand. I have the one from xf50moto on my bike. you can get it here: xf50moto.bigcartel.com/product/yamaha-c3-vox-giggle-side-kickstand

@@MikesMiniMotors thank you !

@@MikesMiniMotors do they have any videos on how to install the kickstand ?

@guapmil7953 Not that I’m aware of. It’s not hard though, can just be time consuming. You have to remove most of your plastics and then it’s just two bolts.

@@MikesMiniMotors awesome thanks!

He is using the Low Down shock from Rolling Wrench. www.rollingwrenchdenver.com/products/lowered-ncy-low-down-scooter-shock-black?sca_ref=2317757.Ut0lWw890q

😂😂😂 You gave it a good shot though!!!

Glad you liked it!!